The music made this job look and sound so sexy! I had to keep in mind I have a long road ahead with repairs 🤣. Thank you for the helpful and pleasant video!
@joevidya
7 жыл бұрын
Thanks for the sultry music, I am now not intimidated by my tile regrouting.
@Lyn4817
6 жыл бұрын
joetca I hope you used a darker grout color or slightly darker color when re grouting. This is our biggest mistake. We use grout too light on color. Everyone has been doing what the tradesmen think is the right color and haven't been listening to the women of the house. The person who ends up doing 99% of the cleaning. It is only in retirement that my husband has been allocated cleaning the floors and grout. He also laid the tiles while I was away as a surprise, so color selection was all his. Guest who is going to be removing the grout and re doing it, early new year.
@1193bobmcc
7 жыл бұрын
Couldn't stop groovin' to the music.
@timplumtree6645
4 жыл бұрын
Brilliantly done 👍🏼 were the tiles porcelain?
@michaellewis4363
5 жыл бұрын
Good video and neat work. Too many jealous people in the comments
@8billionviews752
6 жыл бұрын
How about the water proofing?
@mrjeffro4500
10 жыл бұрын
Excellent demo..
@cathyvanelderen9113
8 жыл бұрын
I liked this video and no need for words. Camera was fine you jerks.
@worldfreerfid2007
10 жыл бұрын
Your camera needs a taxi lol
@gearhead1492
8 жыл бұрын
There is a $25 toool called Grouter Outer that removes grout from floor tile much faster than this, and it does not eat up expensive blades every few tiles. And all you need is a drill.
@goldenultra
4 жыл бұрын
I checked, site closed.
@S.A.7891
2 жыл бұрын
Can you share where is it ?
@gadgevaibhav6509
6 жыл бұрын
sir we need this
@Vincent28281
3 жыл бұрын
what is the second tool used that is used to remove the tile?
@isaacdogkeith9230
3 жыл бұрын
the thing that acts like a chisel is a "5 in one tool" if that's what you're asking :)
@mss4448
7 жыл бұрын
Is it very costly to remove tile? We asked our builder to close without tile, but they wouldn`t allow it. I would love to change them but concerned about cost
@quadcoptervision
7 жыл бұрын
MS S allow between 1 - 2 days to remove tiles depending on size of floor..... smaller floors allow 1/2 day - base day rate between 150 - 200 for removal.
@DiegoGarcia-ip7pr
4 жыл бұрын
Is there no audio, just jazzy music?
@sonofthe80s
6 жыл бұрын
the music is better than listening to the oscillating tool compete with the shop vac
@BabuLal-io4fz
6 жыл бұрын
We want to remove the tile as whole
@Emily-uw5tt
9 жыл бұрын
Video: Excellent.. Thanks for posting! Video effects: Less is more. Stop it. :)
@PolmasterTile
9 жыл бұрын
subscribe to see New ideas for installation kzitem.info/news/bejne/qmedtKR-rJ9ygY4
@loganpatterson4674
6 жыл бұрын
Is that just a 4.5 inch grinder
@sonofthe80s
6 жыл бұрын
its an oscillating tool not a rotary
@JasonHoningford
7 жыл бұрын
I take it that is a special blade that is smooth on the sides...
@7colliemac
Жыл бұрын
Probably a carbide blade on a variable speed bringer. It’s not shaped like a multi tool grout remover.
@russellallen6828
6 жыл бұрын
Russell allen put in
@TheRpapito
4 жыл бұрын
get yourself a carbide Rasp for your multi tool instead to remove thinset
@FELIXCECCONI
8 жыл бұрын
That tile and probably the whole floor was not laid properly in the first place.Floor tiles must be back buttered.
@PolmasterTile
8 жыл бұрын
Yes you're right installation was done very bad...
@jkunderwood3291
7 жыл бұрын
FELIX CECCONI back butter helps, but pounding tile in with mallet is only sure way to get it set in good.
@sandiestafford4085
4 жыл бұрын
No they don’t
@irishlad7458
3 жыл бұрын
Is it an angle grinder or a multi tool
@USMC-Sniper-0137
Жыл бұрын
It was a multi tool with a 360 degree wheel that you can rotate as it wears down. I just bought one today and it's a diamond blade.
@Gwpickard
7 жыл бұрын
At the end of the video it doesn't look like the sub floor is at all clean enough for the new tile. Pretty sure All of the thinset has to be removed. This doesn't even get you close.
@PolmasterTile
7 жыл бұрын
GW Richards yes you absolutely right the cement has to be removed. Otherwise new tiles can't be reinstalled. Maybe you did not see job fully completed ...but we can ensure you everything was done right.
@sandiestafford4085
4 жыл бұрын
It’s fine. It don’t all have to be removed and is almost impossible and totally a waste of time
@keenermarc306
6 жыл бұрын
If they were backbuttered when installed, it wouldn't be that easy!
@georgebetancourt7681
4 жыл бұрын
Exactly
@7colliemac
Жыл бұрын
Must be a variable speed grinder.
@TheDim3s
6 жыл бұрын
the tile hasnt been set properly... look at the lines in adhesive, there shouldnt be any at all... he pulled it properly, but didnt set the tile so it spreads...
@zafarjoiya
2 жыл бұрын
Nice3
@cemilevci1396
4 жыл бұрын
Çok acemice 20 sene önce yapardık şimdi kalekim var zorlama kendini yaz gogila kalekim bak neler var kendine iyi bak hoscakal
@jasonpaden7568
6 жыл бұрын
Maybe in Residential you'd get away with that but on a Commercial site your grinder would have to have the guard on it. Unless you want to get that OSHA $10k fine
@BulgadariXR
6 жыл бұрын
Jason Paden that isn't a rotary. It's an oscillating.
@jasonpaden7568
6 жыл бұрын
I didn't say it was either. Plus that doesn't matter in any way. The guard is off. That's an Osha $10k fine
@willphule
6 жыл бұрын
There is no spinning shaft therefore no need for a guard. They aren't sold with guards and they aren't required by OSHA.
@renenava5213
3 жыл бұрын
Worry about Osha fine you ??? Where in your house by removing one tile ??? So funny comments so many other regulations that many guys don’t obey and here you are worried about oscillating tool plus vacuum on it safety glasses ear protection 10 k ? Are you serious? Get a real job pale 😂😂😂plus gloves 😂😂😂😂
@Slickizme
8 жыл бұрын
The person recording needs to hold the camera still and center the tool within the frame. Not waving it around. And... Don't put up instructions on screen then wave it around... You can't read it.
Пікірлер: 54