Thank you a video without me having to skip through 15 minutes of shit I already knew about the helmet and then 5 more minutes of product and brand plugs that have nothing to do with helmet set up lol Your video was short and right to the point for exactly what I needed to know and again I thank you for that sir!
@SirEpifire
2 жыл бұрын
I really do wish a company just had the ARC rail mounts with wire extensions to bend around the MICH cut. I feel like just doing some DIY wire bends to mount around the lower sides would be fairly easy to do too.
@Rudizel
2 жыл бұрын
Was thinking the same thing. I had to get the team wendy straps and pads to make it work. Still requires a little adjustment but the team wendy pads and straps totally changed the way the ach sits and feels for the better, highly recommended. I got the sordins with just the thin head strap that have the tension band around the back of the neck, those feel the best with my ach.
@f.b.i7055
3 жыл бұрын
Sweet now i can go to school
@f.b.i7055
3 жыл бұрын
@Central Intelligence Agency hi
@rafaelvalladao1678
Жыл бұрын
u ok brodah?
@0Logan05
7 ай бұрын
That’s Code for “Creepy-Federally Funded Fruity Flag waving, Satanic, Domestic Terrorist, Anti Constitutional” - Illegally Spying- Agency “ * Based @ Cern..Works For The U.N.Agenda21/30 Globalist Socialist Clan.. (“CIA” just another Gaslit Moniker…)
@0Logan05
7 ай бұрын
CIA…lol🤮
@matox9690
3 жыл бұрын
that is what i was searching for
@johnevans9298
3 жыл бұрын
Exactly what I was looking for.
@BuckFoeJiden
Жыл бұрын
I've run Walkers Razor electronic ear pro through mine for a while now as a budget option, and they work fine. I ended up going up a helmet size from LG to XL to be able to accommodate the headband and some thicker padding. I'm running a PVS14 bridged with a 3d printed articulating bridge mount I made for a handheld thermal monocular. I have a counterweight in the back, which is basically just an external battery pack for my 4-8x ATN thermal rifle scope, and a couple of extra CR123s for my PVS14 in a pouch.
@Toyota-Coaster
7 жыл бұрын
sweet now i have to buy a FAST cover
@jacer445u5
2 жыл бұрын
This also works with old Xbox/PlayStation headsets that no longer work. Thanks man
@ZiiPVelo
3 жыл бұрын
I know this is a little late but would this work with an older style pasgt style helmet with the old liners instead of pads inside of the helmet?
@TheGoodSirKnight
3 жыл бұрын
It would probably take a little work, but I'd imagine it would work. Honestly, I'd upgrade to the pads and 4 point chin strap as it's pretty cheap to do so now. Also, this was done with the older sordins, but they do make the Behind the Neck style that have a fabric strap going over the head that makes them work very well with older style helmets.
@Chief-CO
Жыл бұрын
Did you ever figure out anything to work with a PASGT?
@KnocKoffReviews
3 жыл бұрын
I've watched this video several times and I jut noticed the cat lmao. I love it!
3 жыл бұрын
I like the stuffed kitty in top of your helmet :v
@istoleyournachofries1266
2 жыл бұрын
Where did you get your helmet cover?
@millo7295
27 күн бұрын
Is there a mountable single ear muff and microphone?
@Milry9646
11 ай бұрын
Will earmor m32 fit under a MICH helmet?
@autisticANDarmed
Жыл бұрын
I wired and paracorded my sordins to the inside of my ACH. I have an opscore occdial suspension system so I can just crank and tighten it down. The headband kept giving me headaches even though I removed padding.
@peytonvoight6297
3 жыл бұрын
Is it still comfortable without the middle and side pads?
@SaysIvan
3 жыл бұрын
I've been using Impact Sports under my ACH without a center pad or side pads. Just configure it right and you're gtg, only issue I have is that it squishes my head a bit. Maybe see if you can size up the helmet or get some behind the neck earpro. Im looking to get some MSA Sordins that are behind the neck for that reason but my buddy has a helmet that fits him a bit large, so hes happy when he uses my earpro.
@jesusf.4879
5 жыл бұрын
Buen video sorbesopas.
@irondan357
2 жыл бұрын
my helmet has fast rails, im thinking of custom bending some wire so i can direct mount my headset and still have full ear coverage, either that or im gonna 3d print an internal mount that uses the strap mounting bolts. still not sure which headset i should start with
@mikleman996
Жыл бұрын
the mini Weapons Grade Waifu patch :D
@jessevillanueva2060
3 жыл бұрын
Hey bro do you find it uncomfortable with nods?
@TheGoodSirKnight
3 жыл бұрын
I never ended up running this set up with nods... now that I have some, they are on a maritime with the AMP headset mounted on the back.
@DaveSmith-cp5kj
3 жыл бұрын
Works well, feels snug. Might be better because there is less shifting of the helmet.
@wyatth.j.1661
3 жыл бұрын
I mean, that’s why the ears were developed like that. Specifically so you can hear, and use commo equipment...
@Greekmilsim
2 ай бұрын
Does it work in PASGT?
@rolethedice4799
4 жыл бұрын
Wait can you do it on airframe helmet as well?
@TheGoodSirKnight
4 жыл бұрын
Any helmet, really... Airframe is open to rail mounts though.
@PeteDaAggieGuy316
Жыл бұрын
Where can I get an awesome MICH OD cover like that?
@TheGoodSirKnight
Жыл бұрын
They used to have them all over ebay, but I haven't seen any on the site for a while now...
@feltathreepercenter8085
2 жыл бұрын
I have and will always go with full cut. the weight savings on high cuts are meaningless. want to be 100% CONFY? stay home. I find the headset tl give me extra cushion too. I can take my helmet off and leave the comms on wearing a hat or a shemag which has been my best friend for years. I will never trade safety for confort neverrrr
@millo7295
27 күн бұрын
I hope you're not like this anymore
@JasperEksdididi
11 ай бұрын
I'm saving up for my first FAST helmet, but i have a separate headset at hand, would it fit if I don it this way as well? Or should I go get a rail adapter instead?
@TheGoodSirKnight
10 ай бұрын
I've grown to only really use the rail adapter. You can generally get headsets to fit under with some effort; but it's a lot more comfortable on the rails and can even help stabilize the helmet so it doesn't move around as much.
@9bang88
Жыл бұрын
I have an ACH which is the previous version, pretty sure it's the same shape but made of Kevlar. Do sordins fit under ACH?
@TheGoodSirKnight
Жыл бұрын
They should still fit. If possible, I'd get the neckband type for comfort under a helmet.
@luke50469
10 ай бұрын
I have a XL helmet where can i get an od helmet cover like yours that will fit?
@TheGoodSirKnight
10 ай бұрын
Honestly, ebay has quite a few of them; specially from ops ur-tactical. They have their own website as well you could probably find one on.
@luke50469
10 ай бұрын
@TheGoodSirKnight I got one off of ebay but they weren't sure of it would fit a lg to xl helmet but it was cheap enough for me to not care if it doesn't work out.
@Phoenix_OP
3 жыл бұрын
where can I get the OD Green helmet cover for the ACH?
@TheGoodSirKnight
3 жыл бұрын
I found this one on ebay long ago. I think it was tru spec.
@IvanMelnychenko-wh4zu
10 ай бұрын
Could you please list some budget ($100-300) headsets that are certain to fit under an LWH?
@TheGoodSirKnight
10 ай бұрын
Pretty much most of them will with enough work. I still think the rails are the way to go. I'd go Howard Leight for a budget and Comtacs for higher end (III or V)
@standyshavrdu4189
3 жыл бұрын
you think I'll fit comtacs II under a fast MT ?
@TheGoodSirKnight
3 жыл бұрын
Most likely, especially now that they have a now padding system designed specifically for that purpose.
@TheMike31b
2 жыл бұрын
Wheres the link for those earpros?
@PETRAS_
3 жыл бұрын
I believe you need to loose the straps of the helmet to the max, isnt it? because my headband doesn´t allow the helmet to sit on my head properly. Thanks in advance!
@TheGoodSirKnight
3 жыл бұрын
Loosening the straps would certainly help; although more and more people are starting to use the behind the neck straps or simply mounting comms direct into the helmet rails. I've been running AMP headsets on my Maritime and that has been a significant improvement over the older way I used to do it.
@Erwintaichoo-rq5qq
Жыл бұрын
What sordins should i get for my helmet ( i got same as yours ), the headband type or the neckband type?
@TheGoodSirKnight
Жыл бұрын
Definitely get the neckband type if you're wearing one of these helmets. It's much more comfortable imo.
@Rudizel
2 жыл бұрын
Hey where did you get your nvg mount plate? I cant seem to find one that fits the ach, have tried 3 different ones from amazon and none fit right.
@TheGoodSirKnight
2 жыл бұрын
It came with the helmet when I bought it from my friend.
@docminty2882
3 жыл бұрын
Could just get thinner pads or a bigger helmet if you anticipate wearing a headset
@docminty2882
3 жыл бұрын
Liberators fit well under achs
@ghifariapr402
2 жыл бұрын
How thick is the helmet? Could anyone tell me?
@chrisrogers4242
2 жыл бұрын
I think my head is too big
@jonathancabral6367
3 ай бұрын
What cover do you have on the helmet??
@TheGoodSirKnight
2 ай бұрын
This was an old URS Tactical OPS helmet cover for a MICH. I don't know if they make them anymore.
@Skankhunt556
3 жыл бұрын
Thank you I wondering if ear pro would work on this cuz of the ear flap thingys how comfortable it is with them under the helmet?
@TheGoodSirKnight
3 жыл бұрын
The overhead I was using would have the weight of the helmet press down and would get a little uncomfortable after a while. They also make a behind the head version that's designed to be work under a helmet that I've heard is far more comfortable with this set up.
@michaelwilson5371
10 ай бұрын
What size helmet? Large or medium ?
@TheGoodSirKnight
9 ай бұрын
Large
@IHATEBO3
Жыл бұрын
Anyone know if howard leight impact sports fit under a mich ? Im sure it would depend on the size but im trying to get an idea
@asphal.t
8 ай бұрын
Its a little tight, but yes
@sethteman5465
5 ай бұрын
Hey got a question where you get the arc rails and is that ballistic rated ????
@TheGoodSirKnight
2 ай бұрын
The arc rails came with the helmet when I bought it from one of my buddies. It's ballistic, but it's the older kevlar designs. The weight always caught up with my neck and it's quite the headache machine.
@sethteman5465
2 ай бұрын
@@TheGoodSirKnight thanks man and I know all about the weight Issues I am in the army and currently deployed
@elavatedqauser3685
2 жыл бұрын
What model of sordins are those?
@tonyconmigo1648
3 ай бұрын
What is the name of the comtacs?
@TheGoodSirKnight
2 ай бұрын
These were an old pair of Sordins. They are a little different. Work well enough, but would always pick up the wind a lot...
@Hugh_Jaynus
4 жыл бұрын
What helmet cover is that?
@TheGoodSirKnight
4 жыл бұрын
Tru spec ACH large OD
@neetIndonesia
6 ай бұрын
What headset are you wearing?
@TheGoodSirKnight
6 ай бұрын
Had an old set of tactical Sordins. I don't remember the exact model.
@jurpledrank6437
2 жыл бұрын
Have you been able to mount your sordins to the rails on your mich?
@matthewsouthworth3696
2 жыл бұрын
You might have figured it out buy now but no, it comes down too low. The max length cut you can have to do this is a gunfighter cut.
@SirEpifire
2 жыл бұрын
Honestly, I think it could be done with custom wires. Might not look as pretty however.
TheMikemg2 all the fun patches get my videos taken down from KZitem. Tap. Rack. Bang.
@TheMikemg2
6 жыл бұрын
The Good Sir Knight lol I'm a fan of few to the chest, face gets the rest. Even have a couple of dakis. Btw, what kind of cover is that? I've got a bare bones mich 2000 that I'm bringing up to par. Came with absolutely nothing, not even screws or pads, but i got it on the cheap.
@TheGoodSirKnight
6 жыл бұрын
TheMikemg2 yep, I've got that patch as well. Haha. And that's awesome. It's a good helmet all around, although I'm looking at slowly but surely making my way up to the ops core Maritime once my wallet had a pulse again. The helmet cover is a tru-spec I was fortunate enough to find out the 2 days it was in stock on Amazon. It was great for OD before I moved over to my ranger green set. Also, ops core padding can fit really well in a Mich, and I've seen people out in the whole occ dial system. Makes it a lot more comfortable to run comms under. Best of luck finding all those parts you'll need. Happy hunting. Man, I wanna get a daki but I'm pretty sure the wife would leave me. Lol
@eduardomartinez5357
5 ай бұрын
PPT
@Banana-ge9dy
3 жыл бұрын
Where you buyed that cat?
@TheGoodSirKnight
3 жыл бұрын
One of my friends actually makes them.
@Banana-ge9dy
3 жыл бұрын
@@TheGoodSirKnight Oh that's cool
@komy9746
2 жыл бұрын
モソニャソ!
@arinocity3606
2 жыл бұрын
Pro tip dont wear both of these with a K3 gas mask worse mistake of my life
Пікірлер: 99