Hi, thanks for video. How to use this system when electrical power lost in my house? What type of sensor to use? thanks.
@fairelectro
Жыл бұрын
You can use batteries.
@johnmarkmanuel2681
Жыл бұрын
Hi sir I was wondering if u can also create fire alarm detector at the same time equipped with anti theft motion detector
@fairelectro
Жыл бұрын
I make video on this project as soon as possible.
@johnmarkmanuel2681
Жыл бұрын
@@fairelectro thank u sir can't wait for that
@martijnvdbrakel7578
Жыл бұрын
At what voltage do u set the buck booster ? 5V for the arduino?
@elecbaskogpogi2086
Жыл бұрын
Sir to operate all this stuff gsm/GPRS module arduino needs a WiFi? Or no need?
@fairelectro
Жыл бұрын
No needs WIFI.
@nkonghoisaac9302
7 ай бұрын
Most the sim used in the GSM module have airtime to send the sms
@r0shnaa
2 жыл бұрын
Can i do the same without DC voltage booster and battery?? I mean use 5V of arduino? Please answer as soon as you can
@fairelectro
2 жыл бұрын
you can use power supply of 5v 2amp but you can not use arduino 5v for gsm module
@mrkawshik206
Жыл бұрын
Does this works with air 200t instead sim 800?
@fairelectro
Жыл бұрын
No, It will work with only sim 800
@lowspecgamer101
Жыл бұрын
what does this means? RX,TX for Arduino and for the module it's TXD RXD, they should be inverted
@lowspecgamer101
Жыл бұрын
how shuold they be inverted?
@fairelectro
Жыл бұрын
Rx connected to tx and tx connected to rx. they should be inverted
@lowspecgamer101
Жыл бұрын
thanks
@jadedmari
2 жыл бұрын
what type of tape did you use to connect the jumper wires on the LIPO battery?
@fairelectro
2 жыл бұрын
Any type of tape you can use
@jadedmari
2 жыл бұрын
@@fairelectro TY
@vincenzo1734
2 жыл бұрын
Is better using a pir sensor or an ultrasonic sensor?
@fairelectro
2 жыл бұрын
PIR sensor is batter because PIR sensor's range is more than ultrasonic sensor
@kotu7360
Жыл бұрын
Can i do it with a module gsm900? If that is possible what changes with the code
@fairelectro
Жыл бұрын
Yes, you can do. Use SIM900 module's library
@kotu7360
Жыл бұрын
Thx,how i do that?
@x3ater410
Жыл бұрын
i am doing the same project for the course, do you have a discord or chat to help me please? by the way i have the boardsim800L blue version does it work the same way?
@fairelectro
Жыл бұрын
yes it works with same way
@x3ater410
Жыл бұрын
@@fairelectro Thank you very much, do you think you could help me on discord or somewhere ?
@fairelectro
Жыл бұрын
@@x3ater410 I am happy to help you.
@nhkbbcYT007bb
Жыл бұрын
Where can I buy like this security system set as ready made , please 🙏😔.
@fairelectro
Жыл бұрын
You can make it at home. All components links are given in video Description.
@nhkbbcYT007bb
Жыл бұрын
@@fairelectro Is there like this can buy as ready made (as security tool) in markets or shops?
@fairelectro
Жыл бұрын
There is a system like this amzn.to/40t80fW
@zainul-ab8611
2 жыл бұрын
Why we use DC booster here?! Could you tell me that??
@fairelectro
2 жыл бұрын
Because we can set voltage with DC booster
@bamoswirelessworld2051
Жыл бұрын
Can it be possible to restrict Alarm SMS to limited numbers?
@Aaaaraaa
2 жыл бұрын
Can we use any sim card in gsm module
@fairelectro
2 жыл бұрын
yes we can use registered sim card
@abdullahafaq6862
Жыл бұрын
How would it know to send the msg toh my mobile? Where do I have to add my number?
@fairelectro
Жыл бұрын
We add number in code as shown in video.
@shubhamubarhande2122
Жыл бұрын
Does this gsm module work on 4g sim?
@fairelectro
Жыл бұрын
yes it works.
@shubhamubarhande2122
Жыл бұрын
@@fairelectro can we use our regular sim card which is used in mobile phone?
@fairelectro
Жыл бұрын
@@shubhamubarhande2122 yes we use this sim card
@shamilazim1911
Жыл бұрын
Hi boss where the link?because it show no file when I click the link in description
@fairelectro
Жыл бұрын
code link is given in video description and its working. Download code and open in Arduino IDE software
@omartahmida5959
Жыл бұрын
Can i use 4g sim? Pls rply....
@fairelectro
Жыл бұрын
yes, you can use
@electrodoctorofficial
2 жыл бұрын
Nice and informative videos
@omronnixt.quicay6344
2 жыл бұрын
what app should I use to open the code link source sir ?
@fairelectro
2 жыл бұрын
Install Arduino IDE software
@zl2980
10 ай бұрын
Why is my SMS not being sent although the sensor is working
@fairelectro
10 ай бұрын
Check GSM module is working?
@omartahmida5959
Жыл бұрын
How can i make a call? Pls rply...
@fairelectro
Жыл бұрын
You can make call by using call function in code..
@vinuscienceexperiment3520
2 жыл бұрын
Sir 2g sim nahi mil pa rhi hai to kya kare
@fairelectro
2 жыл бұрын
battery use kare
@vinuscienceexperiment3520
2 жыл бұрын
@@fairelectro sir sim nahi mil raha 2g
@khalidtech7770
2 жыл бұрын
can we call on mobile
@fairelectro
2 жыл бұрын
yes we can call on mobile
@JamalUddin-pp6is
2 жыл бұрын
I will order 1000 pc . can you share me your full presentation
@lionahmmed9866
2 жыл бұрын
I have made a GSM based Home security system using sim800L, Arduino nano & PIR Sensor. But problem is it's trigger automatically in every 55 minutes. Can you please help me out?
@fairelectro
2 жыл бұрын
problem is in PIR sensor. Set PIR sensor sensitivity
@lionahmmed9866
2 жыл бұрын
PIR Maximum delay time is 7 minute but how it can trigger after 55 minutes. Though i have set the regulator minimum range of delay & maximum range of sensibity.
@tamseelbaloch3891
Жыл бұрын
@@lionahmmed9866 it is due to gsm signals which trigger the pir sensor keep them away from each other
Пікірлер: 68