Here I show you how to remove the flex in your GT Omega ART Racing cockpit.
Parts List:
NOTE! Obviously the side brace length is for my seating position, you will need to measure yourself as you may well have your wheel deck higher or lower than I do.
Each side brace length, width and thickness 575x20x6mm
Side brace bolts x4 M8x55mm you will need four M8 nuts too.
Each piece of X brace length, width and thickness 480x12x6mm
X Brace bottom bolts x2 M8x25mm you will need two M8 nuts too.
X Brace top bolts x2 M8x25 or to go all the way through if using the monitor mount M8x55mm you will need two M8 nuts too.
All can be found on eBay - rover.ebay.com...
𝐒𝐮𝐛 𝐭𝐨 𝐦𝐲 𝐧𝐞𝐰 𝐊𝐚𝐫𝐥 𝐆𝐨𝐬𝐥𝐢𝐧𝐠'𝐬 𝐑𝐞𝐭𝐫𝐨 𝐆𝐚𝐦𝐢𝐧𝐠 𝐜𝐡𝐚𝐧𝐧𝐞𝐥!
/ @karlgoslingsretrogami...
𝐃𝐈𝐒𝐂𝐎𝐔𝐍𝐓 𝐂𝐎𝐃𝐄𝐒 + 𝐀𝐅𝐅𝐈𝐋𝐈𝐀𝐓𝐄 𝐋𝐈𝐍𝐊𝐒
𝐅𝐚𝐧𝐚𝐭𝐞𝐜
www.fanatec.co...
𝐆𝐓 𝐎𝐦𝐞𝐠𝐚
Discount Code KG5
www.gtomega.co...
𝐒𝐢𝐦 𝐋𝐚𝐛𝐬
simlab.prf.hn/...
𝐒𝐢𝐦 𝐇𝐨𝐮𝐧𝐝
simhound.com?sca_ref=889677.vccWmOR5Mo
𝐒𝐢𝐦 𝐑𝐚𝐜𝐢𝐧𝐠 𝐒𝐭𝐮𝐝𝐢𝐨
www.simracings...
𝐏𝐢𝐦𝐚𝐱 - 𝐂𝐨𝐝𝐞 𝐊𝐆𝟐𝟎
pimax.com/?ref...
𝐕𝐑 𝐖𝐚𝐯𝐞 𝐏𝐫𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧 𝐌𝐚𝐠𝐧𝐞𝐭𝐢𝐜 𝐋𝐞𝐧𝐬𝐞𝐬
Use code "Karl" at checkout! www.vr-wave.st...
𝐑𝐚𝐜𝐞 @ 𝐇𝐨𝐦𝐞 - 𝗟𝗼𝘄 𝗥𝗶𝗱𝗲𝗿, 𝗣𝗧 𝗔𝗰𝘁𝘂𝗮𝘁𝗼𝗿, 𝗠𝗲𝗰𝗮, 𝗬𝗮𝘄, 𝗣𝗶𝗺𝗮𝘅.
www.raceathome...
𝐏𝐚𝐭𝐫𝐞𝐨𝐧 𝐒𝐮𝐩𝐩𝐨𝐫𝐭! / karlgosling
𝐎𝐧𝐞-𝐨𝐟𝐟 𝐝𝐨𝐧𝐚𝐭𝐢𝐨𝐧𝐬! www.paypal.com...
Негізгі бет GT Omega ART Cockpit Flex Removal
No video
Пікірлер: 282