I have just spent the best part of an afternoon with this video building the Titan. Thank you very much for this as the instructions that come with it are awful. Massive thank you once again, excellent video which helped me avoid several mistakes.
@mart099
Жыл бұрын
Thanks for this vid mate. Helped me a lot. Instructions are rubbish. Zero flex in wheel. My back is now killing me. Can’t wait to try it out.
@Jay404d
4 жыл бұрын
your video was the only reason i was able to assemble the titan. the instructions were horrible. thank you for making this
@spannermonkeyneath
4 жыл бұрын
thanks
@dgjacobs80
2 жыл бұрын
Instructions are a actual joke! They really frustrated me, and I can't get the Logitech G923 wheel bolted onto the mount properly beacuse the mout holes are near the back
@rwjducati19591
4 жыл бұрын
I've bought one and couldn't understand the instructions either, luckily you made the instructions easyer. Like you mentioned the holes aren't ligned up properly, using your technique helped a lot! Thanks👍
@Billkwando
Жыл бұрын
Got a Titan, and referred to this video constantly throughout the process of putting it together. Thanks!!!
@Billkwando
Жыл бұрын
Got to moisturize..... Somebody's been watching Bill Burr talk about lotion.
@DrKage-vz5jt
3 жыл бұрын
Thank you very much for the video! My titan came in today, and up and running with my V3’s pedals and CSL Elite…thanks again!
@abehaile2659
2 жыл бұрын
Thank you so much for this video man! I can't believe you are the only KZitemr providing useful instructions for this cockpit. You're the man! British sim racing KZitemr Karl Gosling is sponsored by GT Omega and he needs to smack himself for his b.s. build/review video 😑
@spannermonkeyneath
2 жыл бұрын
Thank you. i did reach out to them when i made it and was told no thanks
@invASIAN95
4 жыл бұрын
Thanks for this video mate, didn't receive instructions with mine and this sorted me out in no time.. Have got it partially set up, will finish when my fanatec gear arrives in 1/2 days I did seem to notice that I had a completely different shifter mount boxed with my unit.. I'm really happy with it as its one solid piece of tubing same width as the main frame and bolts straight into the side of the seating mount.. In all other online pics they didn't have this unit so maybe they've just updated the batch.. Perhaps get in touch with Omega GT if you're unhappy with the current flex of the old shifter mount
@spannermonkeyneath
4 жыл бұрын
thanks. i will def look into this thanks for letting me know
@tauttechminusmanagedmusic3778
4 жыл бұрын
Shifter mount tubes are on the Pro, not the Titan. I'm wondering why yours feels flimsy. Mine is very solid. I mean VERY solid!
@Em-7Add11
4 жыл бұрын
@@tauttechminusmanagedmusic3778 i just made my purchase and it comes with the shifter mount so i think people got kinda bummed who purchased it at early release
@MisterKnitter
3 жыл бұрын
Thanks very much for the detailed instructions. I just bought this cockpit and I'm sure your video will come in very handy when it comes time to put it together.
@christophertremblay7603
4 жыл бұрын
Hello, clear explanation, thanks. I’m thinking about buying the base model and add a standard Sparco seat on it, is this doable without modification ?
@spannermonkeyneath
4 жыл бұрын
i would imagine so. would depend on the seat mounting but i think side mount brackets worst case would need 4 holes drilling so not to much if needed to be
@Knievelgod1
4 жыл бұрын
Nice job. Built mine 2 days ago and I love it. Crazy rigid and very hefty. Sorting which bolts were for what was the hardest part for me. A scale pic of the parts with their numbers would remedy that. BTW I bought the S6 seat and it's too narrow. I'm in the process of switching it for the S9 like you have..
@spannermonkeyneath
4 жыл бұрын
Ty. Im well happy with for the price. I was using a pedal stand before so this is quite an upgrade and doesnt move around lol. The rs9 seat is very comfy you wont regret it.
@Knievelgod1
4 жыл бұрын
@@spannermonkeyneath Great to hear :)
@grahamkelly8662
3 жыл бұрын
Hey , does the seat slide forwards? If so, by how many inches?
@Tcottong
2 жыл бұрын
I've been stuck at 1:10 for an hour now. I just don't understand what im looking at or making sense of how it fits together. Another persons video showed different steps here and ive tried both, backtracked and still lost.
@spannermonkeyneath
2 жыл бұрын
You should have a rectangle frame. It bolts to the bottom of the seat base. Hope that helps
@Rikus1978
3 жыл бұрын
Nice review. I doubt between ART and Titan. Is the Titan really much sturdy than ART? or with ART is enough? i use Fanatec 2.5 Clubsport Is it worth to go Titan? I use both Simracing and SimFlight, so i would buy flight hotas support too. You don´t buy Moat? the cockpit don´t scratch the floor?
@dave26702
2 жыл бұрын
Mine came in today. however they either forgot to send the seat with it. Or it got lost during transit...
@ehyouman
4 жыл бұрын
Really helped me build mine this video, thanks man!
@stateside3
4 жыл бұрын
For those who have Titan what's the verdict? It looks very sturdy but I'm interested in understanding if there's any flex with wheel mounting, pedals or the seat back?
@LuKeTt__
2 жыл бұрын
Hello everybody. I would like to buy the Gt omega Titan without a chair. Do you think it is possible to mount my Razer Iskur gaming seat on it? So I buy the basic one without the seat, and save some money :)
@spannermonkeyneath
2 жыл бұрын
You could mount any seat. You may have to use some brackets/drill holes etc to mount to frame but it would is possible.
@LuKeTt__
2 жыл бұрын
@@spannermonkeyneath thanks 🤙
@AnbuReckz
2 жыл бұрын
i just bought this and when u attach the rectangle seat plate tot the seat base did you have to slide it because mine doesnt seem to slide ?
@sevenbelow7
4 жыл бұрын
Thanks for the video. I was thinking about the pro but now I’m moving more to the Titan ??? One question if you could let me know how sturdy the wheel base feels once tightened up ? How much movement up and down??? Thanks again.
@Em-7Add11
4 жыл бұрын
from the reviews that ive read its a pretty sturdy rig with "zero flex" take that with a pinch of salt. another user said that with his LC pedals he had a tiny bit of flex on the pedal plate with the 40kg setting. considering the load cell pedals go up to 90kg, make of this what you will. i currently use a wheel stand pro with a kitchen chair and pillow behind my back so going to this is going to be a treat. was tempted to spend the extra money for a simlab gt1 evo but thought this is ok for a good step up.
@AHGamingUK
3 жыл бұрын
Is it possible to install castors on this? And do you know if this would be m8 size? Thanks 🙏🏻
@spannermonkeyneath
3 жыл бұрын
Yes you would just replace the feet with i think they are m8 thread castors
@LC-yo3bj
3 жыл бұрын
Thanks for doing this bro
@tylerrex7969
3 жыл бұрын
Is the pedal plates the same size bolts as the rest of the rig I removed mine and can not get them back in??!!!
@nexus_aor7623
4 жыл бұрын
Hey man, nice video! How sturdy is the wheel plate? Does it move much or is it stiff?
@spannermonkeyneath
4 жыл бұрын
thanks. i have used it and quite hard braker and found it to be fine
@danielhass4812
4 жыл бұрын
Great video. Does this rig come with additional hardware to mount fanatec pedals, v2.5 steering mount, and shifter?
@bgyen
4 жыл бұрын
I bought some extra M8 bolts and nuts to mount the pedals. There should be enough M6 size bolts (included with the cockpit or Fanatec parts - I can't remember which) to mount everything else. My setup CSW 2.5 (didn't use the included Fanatec riser), V3 Pedals, V1.5 Shifter. I also added some washers here or there wherever I felt that the bolts/nuts would benefit. I have RS9 seat which I kind of regret - lack of lumbar (which could be remedied with a pillow); and the seat material makes for sweaty butt and back - seat does look nice with the rig.
@bigfella6629
4 жыл бұрын
Got my Titan rig today but it came with no instructions and I have a few parts left over and no idea where they go plus the rectangular frame that bolts to the seat mount have no idea what so ever how that works???
@grahamkelly8662
4 жыл бұрын
I’m gonna poss buy this. Did you sort it out in the end?
@bigfella6629
4 жыл бұрын
@@grahamkelly8662 Yes I got it put together but still waiting for Gt Omega to get the seats back in stock. Have been waiting for the last 3 months and still no stock and they can not tell me when they will be back in stock, bloody ridiculous. I am fed up with waiting so now trying to source a seat from somewhere else.
@grahamkelly8662
4 жыл бұрын
@@bigfella6629 oh, that’s not good. When you placed order, did it say that the seat was out of stock? If not , that’s naughty. Did they offer a small refund for making you wait so long?
@bigfella6629
4 жыл бұрын
@@grahamkelly8662 They were out of stock on seats at the time I got the cockpit but assumed it would be a matter of a few weeks to get them back into stock not over 3 months. I relies the covid thing is playing havoc with shipping but they couldn't even give me a ETA even though all their other warehouses around the planet got stock last month.
@grahamkelly8662
3 жыл бұрын
@@bigfella6629 I have a question for you. Do you know if it’s possible to tilt the seat backwards? I’m talking about the actual part of seat where ya bum is? I have slight disability and it will be easier to work pedals if I can tilt seat back so my feet will be at a slightly different angle.
@Timbappe
Жыл бұрын
Legend
@HertzBlut
4 жыл бұрын
I am contemplating getting one of these. I just need to now as I am quit tall. Is the seat adjustable og only the pedals (if that) . Thank for the video
@bigfella6629
4 жыл бұрын
The seat is on rails so it can move back and forth.
@grahamkelly8662
3 жыл бұрын
@@bigfella6629 hey mate, do you know for sure that the seat can move forward, on Titan cockpit??!! I pre ordered it and it’s due back in stock on 26 November and I really need seat to move closer to the wheel, because I’m only like 5,5 and would be pissed if I’m few inches too far away from wheel. Lol. Also do you know if you can move foot pedals back and forth? Oh, I spoke to you before, on this vid and you was waiting on ya seat to come back in stock. Have you received 1 yet? Did you know that gt omega have released a new Aluminium Cockpit? I’m undecided if I really like the design and was contemplating buying it but it’s very expensive. Titan Cockpit with Rs6 seat was £430 and I got it for £390 in Black Friday sale. The new cockpit costs about £750 with seat. I may buy newer cockpit in like a year or so, if I really get on with Titan. But after seeing the price, I decided to stick with the Titan for now. Thinking about having 1 set up in bedroom and 1 in living room. Oh 1 more thing, I think I’m description it said that you can extent the cockpit, but is it easy to identify to extension part? I obviously don’t want to use the extender because my short arse lol.
@GordonJones88
4 жыл бұрын
What exactly are you moisturizing ?
@MrWitoldK
3 жыл бұрын
🤣🤣🤣😂😂😂
@declannorton2023
3 жыл бұрын
Do you know what size the bolts are? Thanks
@Andy-vf3wy
4 жыл бұрын
how easy is it to move the rig around in the same room? I do know Omega sells caster wheels
@spannermonkeyneath
4 жыл бұрын
It's heavy enough to not move when sat there but can slide easy enough if needed to move if that makes sense lol
@Andy-vf3wy
4 жыл бұрын
@@spannermonkeyneath I think I know what you mean, it weighs a bit on paper, but i guess can be moved around like a loveseat.
@Em-7Add11
4 жыл бұрын
@@spannermonkeyneath yes it makes sense. its easier to move when theres not an 80kg man sitting in it lol
@Rikus1978
3 жыл бұрын
I read in a review "slight bit of flex in the pedal base" Do you feel the same?
@spannermonkeyneath
3 жыл бұрын
i found it ok and was using the tlcm pedals. have just got the new prime cockpit and that is another level
@Rikus1978
3 жыл бұрын
@@spannermonkeyneath I have combo Fanatec Clubsport 2.5 and pedals V3 don´t know if this cockpit is enough sturdy for it. Prime is great but is much more expensive.
@Teufelauto
3 жыл бұрын
I have a load cell brake and the flex is barely visible- maybe 1/8" or 5mm. with eyes closed, it's not perceptible at all. My next level racing setup was pretty bad.
@grahamkelly8662
3 жыл бұрын
Hey mate. I’m trying to build my Titan but am stuck right at beginning. The legs have a biggish bolt over them and they seem to have no place. Am I supposed to remove the bolt? I also have a tiny bolt on bottom and the screw is bendy. How the hell do I get em all level?
@spannermonkeyneath
3 жыл бұрын
Im not sure what you mean. there is a thread in the foot with a lock nut that screws direct to frame
@grahamkelly8662
3 жыл бұрын
@@spannermonkeyneath it’s ok, I sorted it. Did you have 4 silver circular small tubes? They fitted into frame but covered up 1 line of screw holes, so I just left them aside. God knows what they for. 😂. I’m going to try and fit pedals and wheel, next. Although, there’s loads of bolts and screws left and I’m not hopeful. I guess I can only try and it shit tightens up, I guess it must be right. I never build anything. So I need some luck. 😭
@grahamkelly8662
3 жыл бұрын
Well, I give up. I’ve taken out screws on 1st two rows of wheel plate and I lined it up and the screws won’t go back in. Plus I have 2 little rectangular pieces and I don’t know where they go. Why am I so bloody rubbish. Also, on my wheel deck I have screws in already and all 4 of mine have the circular piece and you only have them on 2 middle screws.
@spannermonkeyneath
3 жыл бұрын
Can you send me a pic to jackbrucegame@gmail.com
@grahamkelly8662
3 жыл бұрын
@@spannermonkeyneath hello mate, sorry to be a pain but I need guidance lol. I need to bolt pedals to plate and bolt that plate to the rig but I’m unsure what bolts to use. Do I use the short bolts or the long 1s? And do I need any nuts on other side? I assumed that the long bolts are for seat but I’m unsure.
@bigfella6629
4 жыл бұрын
Dam, just relised I didn't get the stickers with mine :(
@Em-7Add11
4 жыл бұрын
crime of the century
@11orbs
3 жыл бұрын
has anyone run this with a Fanatec shifter? how is the shifter mount flex?
@gjdriessen1
4 жыл бұрын
No height adjustment for the wheel deck?
@spannermonkeyneath
4 жыл бұрын
Its on 2 angled plates so is a small bit of adjustment
@grahamkelly8662
4 жыл бұрын
@@spannermonkeyneath do you know if this rig will be ok for someone only about 5ft 2? I thought you could move the wheel height on Titan. Are you able to higher the seat?
Пікірлер: 80