I have just bought this tool and have to say it’s truly amazing. I wish I had bought one of these years ago
@GarageNoise
Жыл бұрын
It really is!
@kevinsandridge5638
7 ай бұрын
I have watched several of your videos now and you are really building my confidence that I can do this. Thanks for sharing!
@GarageNoise
7 ай бұрын
You can do it!
@joanwilliams3221
3 жыл бұрын
Thank you for this video I’m going fix something similar I have the G 90 to and looking forward to using it for the 1st time…
@husky1232
3 жыл бұрын
Great content I injoyed waching this video stay safe garage noise
@Ram010108
3 жыл бұрын
Watched 3 of your videos so far and wow. Your videos are very easy to follow and you do great work. Looking forward for the video on the slap stick!!
@GarageNoise
3 жыл бұрын
Thanks for watching and welcome to the channel!
@stevenagy9257
2 жыл бұрын
Thank you so much, this is what I needed to learn, regarding the wavy wire. I'm going to buy the Vevor 6000 amp spotter, your video has been the decider !
@GarageNoise
2 жыл бұрын
You are welcome! appreciate the support!
@jrv858
2 жыл бұрын
Great job .....im impressed by the g90 you sold me on it i do about 15 a year was on the market for the lenco but im just going to buy the g90 thanks
@GarageNoise
2 жыл бұрын
I hope it works out for you . I haven't had any problems with mine. I think it's a year old now. It is a china product tho . I figure I've already go my money out of it. Thanks for the support!
@frankvalencia9227
3 жыл бұрын
Awesome work chris!..that g90 is great, I’m going to have to get my hands on one of these!..can’t wait for the shrinking metal video..one of my cars has a dented roof that I want to tackle that has that oil can effect..
@courtneylewis9500
Жыл бұрын
That was a awesome job looking good, thanks so much for that video
@GarageNoise
Жыл бұрын
No problem 👍
@YootubeUK
6 ай бұрын
Nice job! It was about time I subscribed!
@robertgrlic6505
3 жыл бұрын
Great work! How do you manage to "preserve " the original body line?
@GarageNoise
3 жыл бұрын
That will be coming in next weeks video. It's a good question. Since starting this channel, I've really had to think about how and why I go about a repair in order to share the best way to explain the process.
@mreightytwenty8709
3 жыл бұрын
Nice job....
@josesanchez4231
2 жыл бұрын
Great video
@stanwardoshiro
Жыл бұрын
After more than a year of you using the G90, how well is it holding up?
@GarageNoise
Жыл бұрын
My experience is, it's holding up well. I use it on almost every job that comes in. Not the perfect tool but inexpensive and it gets the job done. Appreciate the comment and support!
@alexanderduran6948
2 жыл бұрын
good afternoon, I have a question for you, I bought a new machine and when I try to weld with the triangle it does not weld, I have it at 1.8 what am I failing
@GarageNoise
2 жыл бұрын
I'll see if I can help. First make sure the metal is clean. When grounding it the ground should be reasonable close to where your workin ( 1-3 feet) one other thing I've found is lightly apply the tool to the panel don't put pressure on it. It works better that way. Also , when you start pulling with the slide hammer start with light hammers it pulls better that way. Hopes this helps!
@PaintSociety
3 жыл бұрын
1st like!
@GarageNoise
3 жыл бұрын
Thanks bud!
@bayarea6464
Жыл бұрын
whats that blue paint they used to sand on to find the left over dents when you use the dent puller?
@GarageNoise
Жыл бұрын
Tool makers dye link www.amazon.com/dp/B000AYHK9A/ref=cm_sw_r_as_gl_apa_gl_i_2A7JCE60K7P2T2GWDD6A?linkCode=ml1&tag=garagenoise1-20
@johnwoolfrey5093
2 жыл бұрын
Hi Chris, I have a question about your magnetic ground. Does it tack weld itself to the metal surface? Or does it easily lift off when you remove it? I have a magnetic one similar to the supplied one, but mine still tacks itself on. Thanks /John
@GarageNoise
2 жыл бұрын
If it does tack to the metal it comes off easy. I don't think it does.
@IJ_PRODUCTION
3 жыл бұрын
Good job bos 💪
@krisbooth1473
2 ай бұрын
Just bought one of these. Not enough power to ground itself to brand new 20 guage melal out of the box. I tried cleaning it.. then also tried into wall no extension cord... then i used a vice grip tp clamp and wouldnt weld in all 7 setrings even in max voltage.. very dissapointed! Sending back to amazon
@FUNISI126
3 жыл бұрын
Good
@PhillipHall01
3 жыл бұрын
Great Video! Do you have a video showing your pull pole setup? I am subscribing now. Thanks
@GarageNoise
3 жыл бұрын
I don't but I can do a quick break down in a future video. I do have the anchors , post and chain fall in my Amazon store if you want to check them out. www.amazon.com/shop/garagenoise
@PhillipHall01
3 жыл бұрын
@@GarageNoise Thanks so much!
@OscarHernandez-ii1fz
4 ай бұрын
Thank you
@GarageNoise
4 ай бұрын
You're welcome
@RandomAverage_Dude
Жыл бұрын
Curious to know how much this cost to repair
@GarageNoise
Жыл бұрын
I don't remember exactly but I'm thinking $2,000
@fr.rustymatheny7707
Жыл бұрын
vevor unit doesnt work for us, wont spot to clean metal- no customer support either.
@marlonelieserbolano7970
Жыл бұрын
Amigo yo tengo un espoter lo mande a reparar y me lo pusieron directo y me quema los pulsadores me tiene loco y triste
@GarageNoise
Жыл бұрын
🤔
@99lancelightning
Жыл бұрын
I bought one of those machines and sent it back it had no power.
@GarageNoise
Жыл бұрын
🤔
@makojuicedaniel9307
3 ай бұрын
Too bad the trucks value wasn't worth half the work done.
@MrDeathdealer79
Жыл бұрын
Do you think this will work on the thicker metal of a convertible quarter panel
Пікірлер: 49