Very good. Video I like the illustration. Clear cut to the point easy to practice. Thanks a lot
@MakCyberTutorialChannel
3 ай бұрын
thank you
Ай бұрын
very informative instruction
@MakCyberTutorialChannel
Ай бұрын
thank you
@MakCyberTutorialChannel
2 жыл бұрын
Thanks for watching guys.. Don't forget to like & subscribe to my channel
@sofroniocarranza6064
7 ай бұрын
Thank you for the impo
@mvinayagar
9 ай бұрын
Thank you
@adnanmurat3171
Жыл бұрын
Very good
@saviourbenneth1283
2 жыл бұрын
Mine is pry. 3.5, heating coil 0.5, sec. 232. Is it ok
@nhan1026
Ай бұрын
Dobe dikit tamsak from jalyn
@MakCyberTutorialChannel
Ай бұрын
thank you
@jimdennett46
3 ай бұрын
Thanks
@ThomasEdison76366
Жыл бұрын
This is super cool! Thanks for making this video!
@garrettashworth1842
Жыл бұрын
Primary 0.5 heating 0.3 sec 78.6. Is this bad?
@pinayswedish6113
3 жыл бұрын
Galing naman thanks for sharing 👍
@MakCyberTutorialChannel
3 жыл бұрын
Maraming pong salamat sa pagdalaw nyo sa munti kong tahanan
@Savage-lx5yj
3 жыл бұрын
Awesome! Thanks!
@MakCyberTutorialChannel
3 жыл бұрын
Thank you
@unboxstation854
2 ай бұрын
Are there any specific ranges to look for?
@MakCyberTutorialChannel
Ай бұрын
yes, what you see on my video that is the real reading
@augustinechinnappanmuthria7042
2 жыл бұрын
Super
@user-kr7wn3bu5u
2 жыл бұрын
Hi, mine Primary 2,2, , heating 0,6, secundary 98-100 ohms, Is this normal? is there a problem?
@MakCyberTutorialChannel
2 жыл бұрын
Yup, that is normal.
@brycebuckley6588
Жыл бұрын
@@MakCyberTutorialChannel mine is at .5 on the primary,the heater coil at .1 and secondary to body is 101.1, is that normal?
@ChetanJadav1990
3 жыл бұрын
Thanks bro
@MakCyberTutorialChannel
3 жыл бұрын
Thanks for watching
@biswasdipak2795
3 жыл бұрын
1200W microwave inveter out by new transformer setting. Why transformer w plz answer me.
@MakCyberTutorialChannel
3 жыл бұрын
Inverter is a consist of power electronic device. Transformer having 3 coil, primary, heating & secondary coil. & generated high voltage output
@AnilKumar-hh2tb
3 жыл бұрын
Hello bro, my trans. Is body short with secondary How much is it risky in use Or i should change the trans. (Transformer) Immediately
@MakCyberTutorialChannel
3 жыл бұрын
As per my video the secondary coil is connected to the body. this means that the core of the transformer and the rest of the metal frame of the oven is used as the ground of the high-voltage system. This is a normal. Make sure you switch off the system before you do some repair.
@AnilKumar-hh2tb
3 жыл бұрын
Mak Cyber Bro i think no primary and no secondary coil should be connected with body What you say about it?
@MakCyberTutorialChannel
3 жыл бұрын
the secondary coil is connected to the metal frame of transformer this means that the core of the transformer and the rest of the metal frame of the oven is used as the ground of the high voltage system.
@brycebuckley6588
Жыл бұрын
What about 12 megaohms from primary to body is that bad?
@MakCyberTutorialChannel
Жыл бұрын
yes, that is bad...
@skultraelectronicsworld
3 жыл бұрын
Hallo my transformation ok,diot ok,capaciter ok but not hiting why?
@MakCyberTutorialChannel
3 жыл бұрын
If your microwave isn't heating it's likely magnetron. I think burned-out magnetron & unfortunately can't be repaired, it has to be replaced. Other issues is a broken diode or a faulty door switch.
@jhordhangorospe3534
3 жыл бұрын
how about defective trans? what the oms? primary, secondary?
@MakCyberTutorialChannel
3 жыл бұрын
Thank you for watching..If the winding is bad or short the reading is 0 ohms. If the winding is open it means no continuity or no reading on your multimeter. Take note that the secondary winding of the microwave oven transformer is connected to the metal frame or body of the transformer
@jhordhangorospe3534
3 жыл бұрын
@@MakCyberTutorialChannel Thanks Sir.. :-)
@brycebuckley6588
Жыл бұрын
@@MakCyberTutorialChannel so if the heating coil is reading point0.2 ohms it’s bad. My secondary is also reading OL but to the body 102 ohms. In the range of “bad” you think?
@peterfegyveres-nagy6124
3 жыл бұрын
Hi there, I maesured the secondary based on your video, however the value (between 152 and 198) showed up on the multimeter only for a second and it's go back to zero immediatelly. It does the same in every single touch. Please advise.
@MakCyberTutorialChannel
3 жыл бұрын
Means that the secondary winding is open.. make sure that the one lead of your multimeter is in place on transformer body frame and the rest test lead is on the secondary terminal. If the reading is goes down to 0 it means the winding is open
@safetyalways7788
11 ай бұрын
Poor contact on the trans body. Scrape off the coating for proper probe contact
@FeelGud-eni2024
2 жыл бұрын
Hello nag test po ako ng ohms sa heating coil .01 ohms lumabas nagiging zero pa good po ba yun or defective na Sana po masagot samat
Пікірлер: 55