DAVID, YOU WENT ALL OUT WHEN PUTTING THIS BOX TOGETHER,IT SHOULD NEVER COME APART. GREAT JOB !!!!!!!!!!!!!!!!!
@JMTosses
9 жыл бұрын
Awesome build, David - my favorite so far. Love your style and your general approach to working with all kinds of materials. Thank you for sharing!
@DavidWaeldervideo
9 жыл бұрын
Glad you dig sir- thank you!
@TobyKennedy
9 жыл бұрын
Beautiful case, David - and the knot hole was a lovely little detail. Great work.
@DavidWaeldervideo
9 жыл бұрын
Thank you!
@jimmydiresta
9 жыл бұрын
love it some very cool new shots in this
@DavidWaeldervideo
9 жыл бұрын
Thank you !... for not changing the locks yet
@MultiTom1956
9 жыл бұрын
Very nice! I wish i had your talent and ofcourse the tools as well:-)
@MultiTom1956
9 жыл бұрын
Very nice! I wish i had your talent and ofcourse the tools as well:-)
@JMTosses
9 жыл бұрын
Thank you for making him make videos of his work!
@francisbarnett
9 жыл бұрын
Thumbs up for the pizza box dust extraction port. Boom!
@DavidWaeldervideo
9 жыл бұрын
Worked great! Thanka
@FarmCraft101
8 жыл бұрын
Love the look. How you highlighted the patina on the center board worked great, and filling the knot hole with hammered copper was sweet. I'm a little confused why you filled both ends with glued up blocks. I though you were going to cut/sand a profile into them or something and show off the end grain. Did I miss it?
@dongorham2893
9 жыл бұрын
Great build David ! I like that you chamfered the edges of all the pieces. And you know how much I love copper !
@DavidWaeldervideo
9 жыл бұрын
Thank you brother !
@mdbohica
9 жыл бұрын
Great build...and that pizza box reminded me of something my Father told me once. If it's stupid...but it works...then it's not stupid...lol
@MarkLindsayCNC
9 жыл бұрын
Josh Herzberger Murphy's Law of Combat #6. Your father is/was a wise man.
@mdbohica
9 жыл бұрын
Mark Lindsay Yep, I play cards with Mr. Murphy every Friday.
@viniciussuguri6953
9 жыл бұрын
The world's heaviest guitar case in the world
@ragnaroksangel
6 жыл бұрын
Google "redundancy"
@ScrapwoodCity
9 жыл бұрын
It came out really nice! I think it will be a little bit heavy to carry in gigs and studios, with the rest of the gear (pedals etc). But it looks really durable! Thanks for sharing!
@DavidWaeldervideo
9 жыл бұрын
Thank you- it's just a storage case really.
@DavidBishopinc
9 жыл бұрын
I thought that Jimmy was an awesome builder. Now we know who really does all the work. Or maybe its just the tools. Great video and build.
@DavidWaeldervideo
9 жыл бұрын
Haha- thank you
@smacman68
8 жыл бұрын
Nice work. I love the details, like the board left unplaned and the copper plug cap. The joint construction is strong as you can get. Nice to see old material get repurposed and a new life.
@elvinlategan9857
8 жыл бұрын
Thats a cool piece . for storage , not for carrying around
@seanc3362
9 жыл бұрын
Love your editing! So many things in this video... The pizza box dust collector was awesome and the amount of work on that knothole were astounding and shows your dedication.
@odotcomking
Жыл бұрын
@' show me something more than that .playa!statie up cripin.cuzz!ok®™
@TYPE1TEEZ
9 жыл бұрын
Great build. Thanks for all you do. Really liked the pizza box part and the leather work.
@DavidWaeldervideo
9 жыл бұрын
I'm glad you enjoy this stuff! Stay tuned. Thank you
@Geeksmithing
9 жыл бұрын
It is always amazing to me what clean looking lumber you guys are able to coax out of a seemingly worthless charred hunk of debris. Always a pleasure.
@DavidWaeldervideo
9 жыл бұрын
Cool man, thank you !!
@1up147
9 жыл бұрын
Great build, very inventive with the copper in the knot!
@DavidWaeldervideo
9 жыл бұрын
Thank you!!
@stovepipe6769
9 жыл бұрын
I just discovered you KZitem channel,awesome. You and Diresta are the best.
@DavidWaeldervideo
9 жыл бұрын
Cool! Thanks for watching and sharing ! I appreciate it.
@kevohh10
9 жыл бұрын
That turned out great! Loved the palm sander cam too!
@DavidWaeldervideo
9 жыл бұрын
Glad you dig- thanks
@MrTrainman109
9 жыл бұрын
I've never seen a knot hole plug like that. It looks awesome and adds a lot of character to the case!
@DavidWaeldervideo
9 жыл бұрын
It just came to me when the knot fell out- thank you!
@MattDiresta
9 жыл бұрын
Love the look. Love the copper. Love the ending. Great job bud. Have a good trip!
@DavidWaeldervideo
9 жыл бұрын
Thanks brother! Hope to see you gentlemen soon
@app0matt0x
8 жыл бұрын
That's such an awesome case. I bet it smells amazing! I want one!
@IllusoryRedoubt
8 жыл бұрын
that was a really cool build and some sweet riffs at the end. I really enjoy your videos thanks for posting them, it's people like you and Jimmy that make KZitem great!
@ritualafterlife
9 жыл бұрын
Absolute fantasticalism! You sir are the doo doo!.. Sorry. Was told on more than several occasions that I should keep my comments cleaner.. And I shall buy a case now. All I have is a drill, circular saw, and Dremel tool.
@knivesstuff
9 жыл бұрын
Very cool!! I liked it how you made it all with one beam! I also really like the dark old part in the middle of the case! Keep making :) greetings from Holland!
@DavidWaeldervideo
9 жыл бұрын
Awesome thank you!
@benricks2998
9 жыл бұрын
If I take nothing else away from this video it will be pizza box dust collection. Honestly though awesome build. Came from Jimmy's channel to you and I love everything I have seen so far.
@sinlokemp
7 жыл бұрын
Nobody is stealing this heavy guitar coffin 😁 great video 👍🏼
@GregsGarage
8 жыл бұрын
I don't know how I missed this. Glad I came back for a look.
@Erowens98
8 жыл бұрын
How much does this thing weigh?
@simonderycke7545
9 жыл бұрын
It looks great. But how much does it weigh?
@TurkiAU
9 жыл бұрын
Simon de rycke That's what I thought. It looks wonderful and weighs a lot.
@Triggerboy78
8 жыл бұрын
+Simon de rycke He is playin Heavy Wood..
@michaelmitchell9220
9 жыл бұрын
Pizza box dust collector and epic hair blowing reveal. I don't know how else it could get better lol. The Gods of Metal would be proud
@DavidWaeldervideo
9 жыл бұрын
Haha!! Right on thank you!
@jasonhenley84
9 жыл бұрын
Dude you can't make enough videos, we need more! I don't know how to play guitar but I'd still carry that thing around!
@DavidWaeldervideo
9 жыл бұрын
Haha! Thanks brother!
@SkullyWoodMetal
9 жыл бұрын
Very slick idea with the pizza box dust collector. Your guitar will be well protected in that case.
@Traderjoe
9 жыл бұрын
Awesome build David! I love the stacked black wall idea, and it'll wear in beautifully and the icing on the cake is the brass topped knot hole! That'll patina nicely and set it off! Whenever I see giant lumber I grab it too. That wood you found looks really high quality, it's amazing what people throw out, but I am glad they do!
@DavidWaeldervideo
9 жыл бұрын
Thank you very much!
@Deathlimbo87
9 жыл бұрын
love your editing its original and very cinematic dont stop, its your signature CHEERS
@DavidWaeldervideo
9 жыл бұрын
Right on- I appreciate it- thankyou
@hazmongrel
9 жыл бұрын
+Deathlimbo87 couldn't agree more
@adamjohnson5307
9 жыл бұрын
not gonna lie. i was hoping for a little more mmphff on the interior, but still a pretty cool case. this gave me a good idea!
@ridethroughlifertl
9 жыл бұрын
Very nice. Can see the final product? Does the end of the guitar move around in the case much? I couldn't quite see if it were strapped down or not. Very awesome. Keep it up.
@NoBullFitness
7 жыл бұрын
Another great build!!! Wow.
@muddyfences5559
9 жыл бұрын
Like the whole project, but the raw plank with the copper plug sold it. Great work David.
@DavidWaeldervideo
9 жыл бұрын
Thank you muddy
@donalddenison8896
7 жыл бұрын
Geez that must weigh a ton!!! I haven't even finished watching this, but I'm appalled, it would take a trained Gorilla to carry this monster. I've worked wood for about 60 years now, and you do good work though I wonder why you haven't used your bandsaw and jointer more for getting the material in shape for the build. Resawing with the bandsaw is basic to preparing stock. I was chained to my table saw mentally for a long time until I learned how to make the Bandsaw work. A fellow could get by without the table saw entirely if he knows how to use the Bandsaw and a jointer properly. I still use the Table Saw a lot, I had devised about a dozen jigs to make it work. Gradually I ended up using the bandsaw more and more, using it and the jointer to make up panels, even quite thin ones, smoothing and leveling the panels with a sharp plane rather than my thickness planer gradually more and more. It looks like you have the tablesaw figured out, but you could do better and faster work by using your bandsaw and jointer more and the table saw less. I see that you use your bandsaw, but I wonder if you know that you can cut quite precise joints like dovetails with it that require little or no fitting. Free yourself from the chains of the tablesaw, you'll find that you will do better work.
@charliewindsor2992
9 жыл бұрын
Awesome video awesome build awesome playing
@DavidWaeldervideo
9 жыл бұрын
Thank you
@timsway
9 жыл бұрын
Well put together build and video. Great job.
@DavidWaeldervideo
9 жыл бұрын
Thank you!
@jeremiahdevlin1499
9 жыл бұрын
That's a great looking case sir, nicely done.
@DavidWaeldervideo
9 жыл бұрын
Thank you
@jkpq8738
8 жыл бұрын
Looks amazing--any idea what the wood is? Almost looks like fir or something; beautiful. I bet it's not as heavy as others have posited.
@bigronxxxx
9 жыл бұрын
Dave the case is amazing,i really liked the copper knot patch cover,the reclaimed lumber,but where is the purple plush velvet padded lining :-) i really enjoyed the build,video,and the music thanks for sharing the process
@DavidWaeldervideo
9 жыл бұрын
Didn't find any plush purple in the garbage this week. Thank you for sharing.
@ryana2652
8 жыл бұрын
F###KING BEAUTIFUL WORK! Great video and riff at the end!
@DavidWaeldervideo
8 жыл бұрын
Ha thank you, hard to make good noise with that little speaker.
@kickstartmotorcyclemedia
9 жыл бұрын
The beautiful attention to a death metal guitar case is exquisite... in awe dude!
@kylekelley213
9 жыл бұрын
what type of glue or epoxy do you and Jimmy use for the hinge trick thanks
@moisesdelapuente2911
9 жыл бұрын
You do great work with brass n copper why didn't you add some brass numbers to the corners of the case ? Either way it looks great I like the leather on the inside 📐🔩😎🔨🎸
@DavidWaeldervideo
9 жыл бұрын
Thank you
@marsattacks7071
8 жыл бұрын
Great work ! Nice honnest approach ! Thanks
@BroodingPeeps
9 жыл бұрын
Why didn't you put the locks on the top and bottom of the case?
@kryptomiadeathmetalizer8628
8 жыл бұрын
does the hinge stable enough for any tough situation?.. looks like too small for me.. but anyway this is amazing job.
@dannyrodguez7736
7 жыл бұрын
hey man, awesome work. Would you recommend to do a hard case with balsa wood? Do you think it can work or not really? Thanks in advance..
@PatNoire984
9 жыл бұрын
liked so much,nice touches..a very strong-and a bit heavy stuff- perfectly assembled..waiting 4 the diy guitar xD
@DavidWaeldervideo
9 жыл бұрын
Cool man thank you, I like that idea.
@Deimos667
7 жыл бұрын
up until now, on all of our european tours, guitar cases have been breaking from transport. this looks sturdy af!
@marttoor
9 жыл бұрын
very cool and most of all solid case for that guitar! great video, keep up the good work!
@DavidWaeldervideo
9 жыл бұрын
Col, thank you!
@MacnWood
9 жыл бұрын
Keep doing your own style of vids, that's why we sub to you. It's no secret that we found you through jimmy. I personally like your style. If I wanted to watch another diresta video I would just watch a diresta video. Keep em coming!!
@DavidWaeldervideo
9 жыл бұрын
Cool thank you, more to come
@atlgrw0309
8 жыл бұрын
the pizza box was ingenious. nicely done.
@leaf7884
4 жыл бұрын
Just from the title, I know I'm going to love this video lol
@DwightMS1
8 жыл бұрын
Beautiful case. I like how you made it from a recycled charred beam.
@tomalcolm
9 жыл бұрын
I really enjoyed that. But I was waiting for the shot of you picking up the case or carrying it by the handle.
@DavidWaeldervideo
9 жыл бұрын
That's a good point I didn't get any shots, but it's very strong - through tannin- and strapped from the back with oak strip
@MikeMerzke
9 жыл бұрын
Awesome guitar case David! I am really enjoying your videos!!! I see Jimmy busting in for a cameo shot! Keep up the good work.
@DavidWaeldervideo
9 жыл бұрын
Thank you for the compliments! It's motivating.
@seanrusxxx2382
9 жыл бұрын
super great looking case But .....what team of people do you have to carry it ?
@bengarofalo5645
8 жыл бұрын
Now you just need a custom built guitar to put in that case! Rock on!!!
@zerakren
9 жыл бұрын
Very nice case and video. Also I picked up that Nevermore in the background
@Bear551590
9 жыл бұрын
Love it!!! it looks amazing. I love how you splice the repetitive shots on the table saw to look like one continuous shot, jimmydiresta has something to gain there. Great sounding song at the end BTW.
@DavidWaeldervideo
9 жыл бұрын
Thank you! I didn't have a good mic to record sound, but I'm looking to get one soon.
@muhamadafriyanto8478
9 ай бұрын
how much is the dimension for electric guitar?
@tonytemple4813
9 жыл бұрын
Loved the video, and drooled over all the tools at your disposal, thought your skills were amazing, but mate! the weight of that case must be heavy? plus I did not think that handle could cope with the beating its going to get, and only one latch? otherwise AMAZING, and thank you.
@alenvivas
Жыл бұрын
Hello, what kind of wood do you use for this project?
@Mongrel85
9 жыл бұрын
Nice job, very creative in the same ballpark as JD but definitely with your own style man. You guys make a great pair - pizza box cracked me up!
@DavidWaeldervideo
9 жыл бұрын
Cool- thank you!
@Rouverius
9 жыл бұрын
OK, you had me at the pizza box dust collection setup... clever!
@DavidWaeldervideo
9 жыл бұрын
Thank you!!
@offgrid70
9 жыл бұрын
Great project and video!!!
@fish37
9 жыл бұрын
Wow, what can't you do? Maker of all sorts, awesome photographer and now I see you also play the guitar. Great videos, thanks.
@DavidWaeldervideo
9 жыл бұрын
Cool! That's a high compliment- thank you for following my projects- appreciate the support !
@ryanwilson5936
7 жыл бұрын
Dude, you could totally fit an Orange Micro Dark Terror and a decent 10" speaker in that thing. Guitar case becomes combo amp when you take the guitar out. It can also double as a balcony for your houseboat.
@DavidWaeldervideo
7 жыл бұрын
+Ryan Wilson hell yes. I park on it for now.
@Fidozo15
8 жыл бұрын
Do you work with Jimmy DiResta?
@DavidWaeldervideo
8 жыл бұрын
Yes - his shop here
@Fidozo15
8 жыл бұрын
David Waelder I feel so much envy right now
@smacman68
8 жыл бұрын
Well, that would be a hell of a coincidence, now wouldn't it? Another guy with DiResta written all over everything?
@Fidozo15
7 жыл бұрын
Dimebag Dio Kilmister i thought he was his son, or a family member, i don't know. In that time i barely knew waelder
@ConstructIcon
9 жыл бұрын
Well done! Like the pizza box dust chute as well :)
@Chewie316
9 жыл бұрын
Cool case, great shredding!
@Bunnytoes666
9 жыл бұрын
Holy Kriste! You filled a friggin KNOT! Absolutely awesome.
@mikegager
9 жыл бұрын
I have that same planer, it makes a mess. Got to get me a pizza box dust chute for it! Great job on the video and case!
@DavidWaeldervideo
9 жыл бұрын
Ha right on!! Thanks
@ADRIANOS51
9 жыл бұрын
Amazing, video and hand made work!
@tammastrongbear
7 жыл бұрын
thats a beautiful build but that has to be HEAVY...... I built my dj coffin as small as it could be with 1/2 ply and that thing is beast to drag from gig to gig.
@Schlorg
8 жыл бұрын
Enjoyed this Video... thanks for your work!
@RTD121276
8 жыл бұрын
Haha! So awesome. Not sure if it'll meet FAA regulations, but it's freaking awesome!
@ele.photo_
9 жыл бұрын
Awesom edit for this video! great time whatching it!
@olliehutton499
8 жыл бұрын
Do you have tabs how to build that
@DavidWaeldervideo
8 жыл бұрын
Haa. Find burnt building with free wood!!
@kenl5217
9 жыл бұрын
Looks great. I didn't understand why you used a bunch of small pieces for the ends of the case
@red_freckle
8 жыл бұрын
Pretty sure he wanted them to be all end grain
@jaimeguitar7284
8 жыл бұрын
master!! quedo espectacular.
@zhenshuang
2 жыл бұрын
I didn't get how did you get a log. Could you show how a tree grows? I would like to see the whole process of making the case. Damnt. Half of the video you are doing but planks.
@raycarpenter
9 жыл бұрын
Damnit man, killer guitar case. Excellent video.
@DavidWaeldervideo
9 жыл бұрын
I appreciate that! Thanks
@Traderjoe
9 жыл бұрын
Jimmy walks in and is like Hi Mom! Haha
@hyland1984
8 жыл бұрын
once owned a gibson les paul that gave me back trouble due to its weight. mate a nuclear explosion cud go of nxt to that guitar case & there wouldn't be a dint in it. absolutely beautiful case...my only criticism is: I'd have decked it out with loads of inner material. man has to make sure when his baby is locked up, she's got comfort.
@conceptironik
9 жыл бұрын
Very cool case, you killing me with the pizza box.
@DavidWaeldervideo
9 жыл бұрын
Thanks it worked pretty well
@mikejones-vd3fg
8 жыл бұрын
you should build a housing for that mini amp?
@Lucky-zu4mc
7 жыл бұрын
such a genius! thank you for sharing.
@MemphisPains
9 жыл бұрын
The shot where you spliced together footage from each board into one pass on the table saw was awesome. Not sure if I've noticed you guys using that one before.
@DavidWaeldervideo
9 жыл бұрын
Ah cool you noticed, It was an idea I had on the crossbow video. Thank you for tuning in, I appreciate it.
@MarcSchaefermeyer
9 жыл бұрын
David Waelder the editing when ripping all of the boards into one continuous cut was very awesome! Great work and jealous you get to work so close with jimmy! Loved the cameo as well! I'm sure his mom did as well.
@MemphisPains
9 жыл бұрын
No problem David Waelder, always look forward to what you and Jimmy have to share.
@LolitasGarden
9 жыл бұрын
Love that drywall sponge tone.
@flavianekellyflavinha1836
7 жыл бұрын
uollllllllll ... collll... bealtiful... and a song perfect
@blakehahn1375
8 жыл бұрын
How did your table blade not come into contact with the nails you removed before you planed them?
@ouncy
8 жыл бұрын
...err, because he removed them? You answered your own question numb nuts.
@jamezh2822
8 жыл бұрын
+ouncy he removed the nails after he used the table saw dumbass.
@JHA854
8 жыл бұрын
Maybe they're rusted enough that they break easily, but he didn't want to put them through the planer and risk chipping the blades, essentially ruining it.
@valkadrygoods6001
8 жыл бұрын
damnn.. you look like lamb of god guitarist man! love all your works!
Пікірлер: 464