Please support me by listening to my music: spoti.fi/43TAbqx or ffm.bio/waveaway
Visit my blog: www.planetz.com/fret-and-neck-...
In this video, I demonstrate how to level, crown and polish the frets on my Gibson SG. I also show how to adjust the action, adjust the truss rod for relief, and how to intonate the guitar. Also, I demonstrate a tip to improve playability with a glossy neck.
00:00 intro
01:21 tools you’ll need
02:22 removing the strings
02:38 adjusting truss rod to flatten the neck
03:05 DIY fret leveling bar
03:24 cutting the sand paper for the leveling bar
04:32 taping off the fretboard
05:21 taping off the pickup magnets
05:38 marking the frets with ink
05:55 leveling the frets 220 grit
08:00 using the fret rocker tool
08:31 final leveling with 320 grit
08:55 crowning the frets
09:26 using the fret end dressing file
09:37 polishing with 320 grit sandpaper
10:06 polishing with 0000 steel wool
10:41 polishing with a cordless drill and buffing wheel
11:36 removing the blue tape
11:46 oiling the fretboard
12:33 removing tape residue
12:44 bonus tip- satin neck
13:40 adjusting the action
14:18 adjusting truss rod for relief
15:00 intonating the guitar
17:20 troubleshooting intonation
18:06 stretching out the strings
18:28 conclusion
Негізгі бет Тәжірибелік нұсқаулар және стиль Guitar Fret and Neck Overhaul
Пікірлер: 28