Lage Lighting does a wiring loom for the rear lights, pretty sure it works for all series 4 models, I bought one and it Plugged straight into my body loom and lights. Wicked rig btw
@lockednloaded_4x4
8 ай бұрын
Wicked! Cheers for the feedback good to know 🤙
@m.a.w1231
9 ай бұрын
HOLY MACKEREL! This is an absolutely AWESOME looking rig!! 👏🏽👏🏽👏🏽😀👍🏽 GO THE PATROL!! ✊🏽😎
@l4gging4days43
9 ай бұрын
Absolute one of a kind, love the work Mitch!
@lockednloaded_4x4
9 ай бұрын
Cheers legend! Hope you enjoyed the vid 🍻
@cyclemoto8744
8 ай бұрын
Nice work. Thanks for sharing
@lockednloaded_4x4
8 ай бұрын
Thanks for watching! 🤙
@RodneysHolders
9 ай бұрын
Well done, looks amazing!
@lockednloaded_4x4
9 ай бұрын
Thanks mate!
@philemonripin1190
9 ай бұрын
Done subscribe,finally a rundown after seeing it on insta,cheers boys🍻
@lockednloaded_4x4
9 ай бұрын
Appreciate the support
@frasereichner4588
8 ай бұрын
These lads are vibing
@lockednloaded_4x4
8 ай бұрын
Always vibing! 😎
@Jessekidman
9 ай бұрын
this is nice
@lockednloaded_4x4
9 ай бұрын
Thanks Mr Kidman
@Adriansito1506
7 ай бұрын
Great Build but I do have a question, How comfortable is the engine if you were to go for 37-39s in the wheel deparment .
@mitzo0491
6 ай бұрын
Hey man, love what use do, I’m wondering how you blacked out ur sunviser ?? Cheers
@RYAN-ms1mr
2 ай бұрын
hey mate couldnt hear properly where did you say the splash guards were from? lungy or bungy it sounded like? thanks @lockednloaded_4x4
@DKD40
9 ай бұрын
i know the owner of SCF fab work, and he is deaf. very nice guy
@lockednloaded_4x4
9 ай бұрын
We rate his work! It’s great stuff
@mitzo0491
8 ай бұрын
Where did you get the back black carpets from also man mines wrecked
@cadebaker5301
9 ай бұрын
How’d you go with the rear mount of the sliders with the long arms
@lockednloaded_4x4
9 ай бұрын
Ive just cut the rear mount off so just running the two and it’s still super solid.
@bennyjahmin3953
9 ай бұрын
Have you got a second fuel filter in there? Or just the nissan one on the fire wall? I dont believe those filters are suitable for a common rail diesel.
@lockednloaded_4x4
9 ай бұрын
Just the factory filter from a zd30, never had an issue with it.
@bennyjahmin3953
9 ай бұрын
@lockednloaded_4x4 Might be worth looking into. I ditched mine for a mux/hilux filter setup when I started swap 6 years ago (way before dca had their kit). From memory those filters only filter down to 15 or 20 micron where a commonrail system needs something like 2-5 micron filtration. Anyway top effort on the build. Super clean 👌
@mitzo0491
8 ай бұрын
How’s ur headliner going after been taken down and put back up, any sagging anywhere ?
@lockednloaded_4x4
8 ай бұрын
Hey mate, nah been taken down twice now and still goes back up like new. They’re a solid design so no sagging
@ClaytonCookpanda
6 ай бұрын
Since im in townsville. mihght need your advice. tb48 chopped gu. play car. ive been at an event or two where ive seen your rig. sas'd d40 ill be selling soon. use some of that money to sort the GU
@mitzo0491
8 ай бұрын
Also with the headliner did you re roll it or spray it ?
@lockednloaded_4x4
8 ай бұрын
Just sprayed it
@mop-4X4
9 ай бұрын
What rack system are you using to get the rooftop so low?
@lockednloaded_4x4
9 ай бұрын
I am using the gutter mounts for a steel rack, and theyre just mounted straight to the rooftop.
@braydenruttley1184
8 ай бұрын
Hey mate what year and model is this?
@frankg2875
9 ай бұрын
Is the rtt mounted just on the roof gutter brackets or is there crossbar under there?
@lockednloaded_4x4
9 ай бұрын
Direct to the gutter mounts
@christiankoenig1919
9 ай бұрын
Which one pulls harder, this or the cruiser?
@lockednloaded_4x4
9 ай бұрын
Cruiser for sure mitch might disagree. -Alek
@lockednloaded_4x4
9 ай бұрын
This is a great video idea 😏 - Mitch
@rileyhodson8719
9 ай бұрын
How do you rate the hyplerflex arms driving wise?
@lockednloaded_4x4
9 ай бұрын
Yeah they’re awesome. Just need the swaybars otherwise it’s a little bit wild
@mitzo0491
8 ай бұрын
Looks sick bro, what did u use to make the plastics and headliner black, does it rub off on u if u scratch it also bro
@lockednloaded_4x4
8 ай бұрын
Hey mate cheers, I used a black vinyl paint from repco and nah it’s sweet
@mitzo0491
8 ай бұрын
Cheers bro Did u prime it also
@SANGMINOH-d4d
2 ай бұрын
Hey mate. Still selling this??
@stephenwall5210
9 ай бұрын
How long did the engine conversion take? Where did you get the wiring loom from. Would you recommend a 4jj1 swap to other people. Did you have to send the gear box away to get Diesel conversions Australia to machine the plate that goes on the front of the gear box.
@leightonB69
9 ай бұрын
@roamlyfe on KZitem has done this conversion 🚶♂️ by 🚶♀️ check it out full parts and where from
@lockednloaded_4x4
9 ай бұрын
Took about 5 months but 3 months was waiting on parts for the motor. The loom I used was from DCA which is pretty easy to wire in. Would definitely recommend as a swap but no need to build the motor. I just took the front plate off and sent it away. Not the whole gearbox.
@stephenwall5210
9 ай бұрын
Thank you so very much for the information.
@keilfestin4606
9 ай бұрын
Weren’t you selling this? It was on FB marketplace
@lockednloaded_4x4
9 ай бұрын
Still up for sale, got another build that’s underway and going to primarily focus on that
@SANGMINOH-d4d
2 ай бұрын
Hey mate. Still up for sale?
@Christopher-i2h5y
9 ай бұрын
Show pony
@lockednloaded_4x4
9 ай бұрын
Thanks for the compliment! Its been to cape twice, Glass house mountains twice, Cruiser park, and still gets show pony comments ;)
Пікірлер: 54