Always good to pull these Annie vids up again when I pull the old 501 out. I'm currently getting it to bind enough to my multi protocol T16 to control the lights, but the motors won't start. Every time I finish the compass calibration, the lights show a good cal, but then it returns to the swirling red light pattern. I repeated the cal several times in the same exact location, to no effect. I saw somewhere else where they were talking about an IMU cal by going right rudder then moving the directional control left and right until the lights change. I'll try that next before trying the compass cal yet again. 🙃
@eastcoastdrones4517
7 жыл бұрын
Annie, would have loved this, but I had a fly away last week ;( 40 great flights and 1 disaster. Thanks for all your help
@eastcoastdrones4517
7 жыл бұрын
Drone Worship I know, it's such an awesome drone. It was my go to quick ready to fly. I'll get another shortly. Love your videos DW
@HUBSANOFFICIAL
7 жыл бұрын
Sorry to hear that! Compass/GPS nterference is a big pain in the...er...ha.
@blinkitphotography
7 жыл бұрын
Amazing, I knew I picked the right company for my first drone. Can't wait to see more updates with this H501S
@DashDrones
7 жыл бұрын
great vid, although the mini USB is the old style cable. the micro USB is the Android style, easy mix up
@HUBSANOFFICIAL
7 жыл бұрын
Noted! We've marked it in the video. Thanks!
@AutomedeG
6 жыл бұрын
подпишись Hubsan X4 H501S - пульт больше не нужен - the remote control is no longer needed kzitem.info/news/bejne/lXqN24dub3SLbIo
@lukappaseidue
7 жыл бұрын
thank You Anne (and Your team too) for your work ;)
@HUBSANOFFICIAL
7 жыл бұрын
No problem!
@alb.dersame
5 жыл бұрын
@@HUBSANOFFICIAL Hi Annie. What a great personality you have. You are very well informed. You just ROCKED my world. I haven't tried this yet ? But with such a perfect description, I know this will work well. I'm debating on what to do though. Some say do the upgrade, some say DON'T. My situation is .. I have a black h501s that flies perfectly. My white gold one isn't. If I update the software with my white gold hubsan, will it have any affect on my black one, that already flies great ? With the white one ? I don't know what else to do, to make it fly properly. It toilet bowls, won't hover correctly, won't follow me, nothing works. I'm at a standstill. I want them both to fly right, but don't know how to go about this ! Any ideas ?
@AuroraColoradoUSA
4 жыл бұрын
When plugging the micro USB connector into the drone, be careful that it is oriented correctly, large side with the large side, small with the small.
@AuroraColoradoUSA
4 жыл бұрын
@Captain Phlikenpoots Whatever delusions get the anonymous troll through the day...
@wepilotdrones578
7 жыл бұрын
Smartest, cutest tomboy ever! How would anyone ever know any of this if it wasn't for this one video? Question: what's the best reason to do these upgrades and are they absolutely necessary? Thanks.
@flowinthrou
6 жыл бұрын
Yes.. and with all these fails of upgrade, isn`t it just better to leave it as is? Is it highly recommended to do the upgrades? thanks
@NeoIsrafil
7 жыл бұрын
I appreciate the video, but if the hubsan website could actually have any hint of the firmware on it that would be great.
@michaelbyrd8430
4 жыл бұрын
www.hubsan.com/na/index.php?main_page=support
@wingmanalive
6 жыл бұрын
Wow, I didn't realize this was so complicated.
@boshaveit
7 жыл бұрын
also I have noticed a squeaking noise coming from the drone... I am an engineer and felt for play in the motor's. The rear right hand motor has play in it, the others have none. I've only flown it twice. please help with this and my battery query.. many thanks.
@jesseabonza8809
7 жыл бұрын
I was never given that option in the files, only the FC, and the RX files are available
@eugenehale870
7 жыл бұрын
GREAT INFORMATION. I am new to this firmware . Why is this important to upgrade? When do you know when to upgrade? Does their have to be something wrong with the drone? Any responce will help all of us new to flying. Thanks E.H.
@HUBSANOFFICIAL
7 жыл бұрын
Sometimes people are experiencing problems with calibrating, range, binding and etc, that is when we would suggest to do a firmware upgrade. If the drone is functioning perfectly and meets all that you are looking for, we do not see a reason to upgrade.
@Rapscallion2009
7 жыл бұрын
4:30. Isn't it a USB port - not a COM (RS232) port?
@khiembolsa
7 жыл бұрын
I have problem with recording, its give me message "put throttle down" when I hit on recording button, please help
@koningtiger1
7 жыл бұрын
Annie your the boss! Thanks from Mexico!
@jameslovell8682
7 жыл бұрын
Brilliantly presented, but I still hope I never have to do this.......
@HUBSANOFFICIAL
7 жыл бұрын
Thank you! If you are satisfied with how your drone flies, you might never have to :)
@luanmartinelli4588
7 жыл бұрын
I can't calib the compass 2, I need to do this?
@deanbounds2633
3 жыл бұрын
Hi Annie have done firmware upgrade and i cant get check gyro sens off the screen and the battery icon for the drone shows empty even with a fully charged any advice would be amaizing .
@btlaw123
2 жыл бұрын
I am a total newbie. I just bought the Hubsan H501S Professional version January of 2022 with the H906A controller. The one and only version number shown in the setting is H906A v.1.31.19. There is no TX, RX or FC version number. Do I need any firmware or software updates?
@ConcertTours
7 жыл бұрын
Great Video Anne! Thanks!
@merricat5978
4 жыл бұрын
I can't update the lasted firmware , I do following the tutorial until 7:37 when I press the upgrade, it show me "update error". Do you have any idea to figure out?
@GenioCinelli
4 жыл бұрын
I receive the same error. Did you ever receive a response? I did notice you might need to "Unblock" file. Right-click on the firmware file, select properties in the many that pops up, and tick the UNBLOCK box. However, even after closing all down, still the same update error. I'm wondering if the H501S Standard is actually the 501SS firmware and not 501S firmware.
@merricat5978
4 жыл бұрын
@@GenioCinelli I changed to uddate H501SS instead but still have the same problem.
@christianmarb1837
6 жыл бұрын
Hello, Could you tell me where to find all the spare parts of the Hubsan drones: H109S pro 1 axis and 3 axis, the H107D + and the H501S. Including all electronic cards and body parts. Thank you. I live in France but I order everywhere in the world, and France (Europe) is too expensive. Cordially.
@muhammaddimasfarhanjamil853
7 жыл бұрын
What's the benefit by upgrade the firmware?
@mikewaterman1905
7 жыл бұрын
hi I bought a husband x 4 star ..h 502c ..n wanted to know if I have to do firmware updates and can I do it from my cell phone.. n will aftermarket batteries work for it . n is there a app or can I do fpv with this drone ?
@MET7375
7 жыл бұрын
Property after the firmware update (superfly) as described above (thank you for the instructions). Since the restart of the H501S, the Gory sensor is no longer synchronized. "CHECK GYRO SENSOR" Do not move the aircraft Is on the display, the H501s beep and beep i think i need this firmware: FC-V1.1.35 but i don't find it!! please HELP
@fajararjangkrikfpv9498
7 жыл бұрын
i have x501s standart controller,i already upgrade it with extended antenna fpv 5.8ghz 14dbi and 2.4 ghz 3dbi but still i can fly higher max only 254m altitude and in 200m fpv is black out.and cant reach more higher than 245m seems like it has limitter.what should i do
@Pavloukos
2 жыл бұрын
Where can I find the files of h501s firmware upgrades in 2022???
@mikewaterman1905
7 жыл бұрын
n with my drone I only got the drone and the transmitter and Battery no prob guards no internal for firmware updates chord for firmware ? 😭 ?
@mytige20V
5 жыл бұрын
Annie while in Tech Support has done a fine job but she left in Sept. of 2018.
@juanandrade1434
5 жыл бұрын
Thank very much. ....
@jr100g4
7 жыл бұрын
Great Tutorial Anne, I assume this is the same way to upgrade a 502s with the same Tx
@RTegland
6 жыл бұрын
If you want to modify the parameters on an H501SS, you must first plug the battery into the quad, let it boot up, then plug in the usb. Click Restart in the tool, unplug the quad's USB and battery, plug battery pack in, boot up and then plug in USB. Once connected click Get Parameters. When done click Flash.
@btlaw123
2 жыл бұрын
When I tried RX upgrade I got "timeout on command response" please help
@INTELMAXELL
7 жыл бұрын
This girl is awesome! Thank you :)
@sergiyyeremeyev
7 жыл бұрын
Annie,Hi,After installation of new video board ,the green screen with Hubsan logo on the screen, without video.Green light is flashing on board continuously,.Tried so many times to change firmware-situation is the same.Just problem that video is not going.As my understanding, this is like when you start the system and system can not be loaded, due missing boot.May be needed to flush some of firmware to the video chip?Any suggestion or recommendation will be highly appreciated.Thanks,Sergiy
@HUBSANOFFICIAL
7 жыл бұрын
That means you upgraded the transmitter with a wrong firmware. I would suggest that you send an email to our support team at service@hubsan.com for further assistance.
@judotaffy
7 жыл бұрын
I am trying to upgrade the rx. My transmitter is correctly reading UPGRADE RX MODE V2 and is connected by the usb cable to my laptop. However I cant get past step one on the RX upgrade tool. It just says set RC in upgrade mode and connect to PC, NO upgrade tool connected!
@sweetchkz
7 жыл бұрын
Hi Annie, my drone is upgraded but I still have four red lights on the legs and on the belly. Even after the upgrade. Do you know what that means?
@HUBSANOFFICIAL
7 жыл бұрын
It is probably just that the upgrade was not successful, please try to upgrade again.
@David71570
7 жыл бұрын
When i try to upgrade the transmitter, "No upgrade tool connected" display, what to do please ?
@pulaknsu
6 жыл бұрын
Dear Hubsan concern, Upload some videos on "gyro sensor" problem of H109S. I'm having such problem with my newly bought Hubsan X 109s pro. Eagerly waiting for your assistance
@danielangus9598
7 жыл бұрын
ps. the controller says 'manual mode' at the bottom despite having it off in the menus. pps. i performed the upgrade attempts 3 times and one with my virus protection off.
@MrMad2424
7 жыл бұрын
Very good video! I upgraded to Superflyer a few days ago but I left 4.2.8 on my tx instead of putting 4.2.9 on it. Do you for see me having any issues with 4.2.8 on it instead of 4.2.9?
@HUBSANOFFICIAL
7 жыл бұрын
The Superflyer would require you to have 4.2.9.
@MrMad2424
7 жыл бұрын
I have 4.2.8 on my controller now with Superflyer and it works fine and I can't find any issues with 4.2.8. I got 1407 meters with stock antenna set up on standard controller. Do you know any differences in 4.2.9 and 4.2.8?
@petejansen8098
7 жыл бұрын
I purchases a H501S Advanced with the better transmitter for my son for Christmas.The FPV range is terrible even in open space. Nothing like the 1+ kilometers people are getting online. I've read that you shouldn't do the firmware updates if you have the advanced transmitter. Is this true and if not, what firmware numbers are the best for this setup? Thanks in advance. PJ
@HUBSANOFFICIAL
7 жыл бұрын
The firmware might help you with the range problem but sometimes it is a hardware problem. You can visit www.hubsan.com for the latest firmware.
@4037leonel
7 жыл бұрын
HUBSAN OFFICIAL I have the same problem. if is hardware. what part can be? or how can I fix it
@NoisyKayakAdventures
7 жыл бұрын
woow great info! and super well spaind,, just win a new sub! thanks for this great channel, agretting
@dickvid3112
7 жыл бұрын
hi Ann ,after I had my main board renewed ,there is not other color leds apartfrom white .is it still flyable?what can I do to fix it?
@HUBSANOFFICIAL
7 жыл бұрын
This inquiry has already been received by the service inbox. Please allow for a response from your designated representative.
@luanbaviloni6714
7 жыл бұрын
I'm from Brazil. I bought a Hubsan H502S but when I try to calibrate the compass, it stay "Calib Compass 2" and never disappears. :(
@HUBSANOFFICIAL
7 жыл бұрын
I would suggest that you send an email to our support team at service@hubsan.com for further assistance.
@devpunk0cool286
7 жыл бұрын
Hello Ann! I'd like to purchase a (New) H501s without controller. Is that possible? I already have 1 advanced controller and 2 standard controllers. So I only need the drone itself. Thanks
@HUBSANOFFICIAL
7 жыл бұрын
We have a H501A model coming out in March, that one only comes with the drone because it has the new WiFi feature. You can also use your transmitter with it. Please visit www.hubsan.com for more information.
@basicdronee7630
5 жыл бұрын
Hi, im a new hubsan x4 standard owner, but my drones transmitter is not asking me to calibrate my drone or not displaying the word " calibration compass 1" i tried spinning the drone for what was told but the leds r not blinking as what ive seen in other videos. Thanks
@Roboticdoughbull3k
4 жыл бұрын
With either tx you hold the throttle stick "left center position" while you quickly "rock the right stick left center to right center back and forth quickly" until the calibrate compass 1 displays on screen.
@printer5518
7 жыл бұрын
Hi Annie, I just ordered an H502E and the website I ordered from sent me an H502T. It looks like a 502C. what did they send me?
@HUBSANOFFICIAL
7 жыл бұрын
We do not have a H502T, so I am not sure what you are talking about. Feel free to send an email to our support team at service@hubsan.com and provide some photos of the unit you received.
@ryanmccarthy9762
7 жыл бұрын
it only says not connected how do i get it to connect
@Waltkat
7 жыл бұрын
Are there any firmware upgrades for the H502S transmitter? Mine shows V4.2.19
@HUBSANOFFICIAL
7 жыл бұрын
The 4.2.19 is the newest one.
@Killerdavefff
7 жыл бұрын
What language pack is needed for tx upgrade
@augustbnnelykke212
7 жыл бұрын
Can you opgrade the hubsan 501c' s firmware?
@HUBSANOFFICIAL
7 жыл бұрын
We do not recommend upgrading unless you are experiencing problems with your unit.
@btlaw123
2 жыл бұрын
I just bought my first drone H501S pro) ever for my grandchildren. No matter how I tried I have no luck getting the video clips to play and nopictures either. Please help!
@btlaw123
2 жыл бұрын
I just got the pictures and videos working. It was the wrong format on the SD card. FAT32 got it going but none if the pictures and video clips has any time and date stamps. They all shown Jan 1, 1980!
@sully3544
7 жыл бұрын
My x4 501s can't capture video. I get garbage mp4 files with very long file names and no extension. NO software can recognize open convert or play them. I've tried them all. Will a firmware upgrade fix this. Also, why is my drone not in ready to fly status out of the box? It seems others were. Thanks,
@HUBSANOFFICIAL
7 жыл бұрын
Hello, Tre. You're likely experiencing an SD card formatting or compatibility problem. Please use this video to find out if you have an S or an SS. : kzitem.info/news/bejne/rGirlm2caqxopaQ If your drone is an S, make sure that your SD card is less than 64GB and class 4 or higher. It will need to be formatted to exFAT. If your drone is an SS, make sure that your SD card is less than 64GB and class 10 or higher. It will need to be formatted to FAT32. If still you are having problems, please send an email with a screenshot of the error to service@hubsan.com
@Palmateer29
7 жыл бұрын
also annie if by chance it doesn't work but it should BUT if something happens can i roll back to original FW that came from the factory thank you
@mssippijim
7 жыл бұрын
Should this upgrade be applied to a new H501C?
@mixer2791
7 жыл бұрын
thank you for the video, we feel that may be you could do this for all the Hubsan drones that you mate. as would be very handy, all so is there any update coming out for the H109s using both the basic controller and the Pro H7000 controller?
@HUBSANOFFICIAL
7 жыл бұрын
We will be working on more updates as well as the upgrade instruction videos.
@tanagritm
7 жыл бұрын
For my H501S only RX V1.2.12 and FC 1.1.21 stable. Firmware, and other recent. Instability and bugs, gps not precisely, follow mode does not work, and the no fly softness and can not be binding. And the TX V1.1.3 firmware upgrade allows for FPV1 FC RX and much easier after finding trouble from TX V1.1.2.
@Honda1k
7 жыл бұрын
My transmitter is not showing up in the upgrade tool? Any ideas?
@HUBSANOFFICIAL
7 жыл бұрын
You would need to be in upgrade mode for your computer to detect the transmitter, if this does not help, I would suggest that you send an email to our support team at service@hubsan.com so that we can provide the necessary driver to you.
@brutalpanther
7 жыл бұрын
My question is,Do you have to do a compass calibration before every flight.Or is it a one time deal.
@HUBSANOFFICIAL
7 жыл бұрын
You have to calibrate the compass every time you power on the drone.
@dronesebrinquedos1082
6 жыл бұрын
A friend doubt, for those who have the standard control, if I upload the drone it obeys all the commands, rotate, forward and back, but if I am descending with it manually it obeys no command, only descends or I can not deviate from nothing, I have to stop it and move it and then continue down, is it anyway? In my control is the following parameters V4.2.36 LCD v1.3.3 H501S v2.1.50 FC v1.1.46 CAM V30.84.84
@ThanhDang-fv1kr
7 жыл бұрын
Hi, can you tell me donwnload the Firmware just two files FC and RX , and why i haven't got the file RC. FPV, and how can i get the file RC for FPV My drone didn't work , because Transmitter not camera Screen no display ? please how can i do ?
@HUBSANOFFICIAL
7 жыл бұрын
There is no need to upgrade the transmitter. Have you tried rebinding your drone to the transmitter?
@dogmanfilms1
6 жыл бұрын
I follow the instruction exactly and when I press the "Upgrade" button for the FC I get an "Upgrade Error" all the time. I have tried different ways to try it but the same appears. Can anyone help out?
@HUBSANOFFICIAL
6 жыл бұрын
You're using the wrong tool and wrong video tutorial, most likely. If you are using the FC Upgrade Tool V3, switch to the H501A Upgrade tool V1. Vice versa applies as well. Make sure your FC firmware begins with H501A. kzitem.info/news/bejne/yaFvqZudZqOBY4I
@farooqui24ify
5 жыл бұрын
I'm trying to do this update and it shows "update error" everytime. It shows the drone is connected but still same outcome. Anyone have a solutuon?
@alan15882
6 жыл бұрын
Hi were do you get the latest firmware fromi try'd a site called drones for life and every time I try the firmware from there it just says update error
@HUBSANOFFICIAL
6 жыл бұрын
Use www.hubsan.com, "Support", "Product Support". Please note the difference first between an H501S and an H501SS and then go from there. You may use our video on the differences between the two to make the distinction: kzitem.info/news/bejne/rGirlm2caqxopaQ
@dogmanfilms1
6 жыл бұрын
I have just purchased 2 Hubsan drones. The H501s and the advanced version but both of the Video and photo does not work and they both don't recognize the Mini SD card. I have tried several types of cards with no luck ! Can anyone help please?
@HUBSANOFFICIAL
6 жыл бұрын
Back to Basics #15: Micro SD specifications and formatting for the H501S, H501M, H501A and H501SS facebook.com/hubsan001/posts/1785092691795746 Back to Basics #14: The do’s and don'ts of taking photos and videos facebook.com/hubsan001/posts/1784351495203199
@ChancetheCanine
7 жыл бұрын
I just received my 501 today. It will do the compass calibration alright, but I can not get the motors to go after I have armed them. I also notice in the lower left of the screen the LED is red for the thottle stick all the rest are green, is that the way it should be? Thank you.
@HUBSANOFFICIAL
7 жыл бұрын
You should try calibrating the sticks and yes, it is normal that the LED is red for the throttle stick.
@ChancetheCanine
7 жыл бұрын
Thank you very much, I did and it works great! :)
@rottenrottie1515
7 жыл бұрын
anyone know what color should be on or flashing in follow me mode
@user-gg3fd2id1t
7 жыл бұрын
Why is my Video so bad? It looks like it's recording from the Transmitter
@Dan2Mx
7 жыл бұрын
hola, donde puedo comprar las baterias originales para mi h501s x4, saludos y gracias
@myvipdronescelio2300
7 жыл бұрын
Amiga boa tarde, então! Preciso muito de ajuda, atualizei o meu controle, e quando fui ligar para. Calibrar os stick, e o controle não liga mais, como fazer para reverter a situação. Estou muito desesperado e triste..
@LRB1989
7 жыл бұрын
I have a problem, I just bought my hubsan h501s advanceversion and at the beginning I could not calibrate the compas 2 (vertical) now I try to calibrate the compas again and it seems to me a message on the radio saying lost signal .. please help me :(
@HUBSANOFFICIAL
7 жыл бұрын
Have you tried the newest firmware from this link? shop.hubsan.com/index.php?main_page=support
@LRB1989
7 жыл бұрын
I just did the firmware update that is in the link, I followed the steps and everything was ok, but in the end I have the same error. I pass the calibration of compas 1 and then on the vertical I see GPS signal lost and an alert sound in the control. I recorded it in video ...
@mustyj1944
7 жыл бұрын
good video I have upgraded the firmware successfully for the H501s after all the upgrades finished I get 2 issues. 1. on calibiration on compass 2 I get "gps signal lost" then the constant beep 2. when trying to start the motors the way i did before nothing happens the motors don't spin, any help would be gratefully received, kind regards, justin
@HUBSANOFFICIAL
7 жыл бұрын
1. If you are holding the body of the drone for compass 2 then the GPS signal will drop because your hands will be blocking the GPS module. 2. The latest firmware requires 6 or more satellites to start up the motors. You can also try rebind and transmitter sticks calibration. If you have any further questions, please don't hesitate to send us an email at service@hubsan.com. Thanks
@mustyj1944
7 жыл бұрын
HUBSAN OFFICIAL thanks for the reply. I hold the legs of the drone and then do the compass calibration but same issue even after the firmware update. The 6 satellite issue I understand but there are many people reporting this gps signal lost issue only on compass 2. It happens on the H501s and H591S-S models as well
@duffyscourt
7 жыл бұрын
stuck on check gyro sensor ..... wont goto compass calibration..please help
@HUBSANOFFICIAL
7 жыл бұрын
Try upgrading the firmware on your unit, it will most likely solve your problem. You can download the latest firmware from our official website at www.hubsan.com.
@duffyscourt
7 жыл бұрын
HUBSAN OFFICIAL managed to do it today problem I was having is I have the h501SS and not the h501s , different firmware
@davidborman6102
7 жыл бұрын
When binding my H7000 Transmitter to my Hubsan H501 drone I get a constant alarm accompanied whit a "Low Battery Plane" in the small screen. Do you know how to solve this issue?
@HUBSANOFFICIAL
7 жыл бұрын
The H7000 was made for the H109S- which has a much higher power threshold. So, naturally, it will feel that the H501S battery is an H109S battery on "low power". Unfortunately, as you can imagine, there's nothing that can be done.
@davidborman6102
7 жыл бұрын
Will this trigger the return home feature? I there a way to silence the alarm? Thank you Anne
@pimp_beef1249
7 жыл бұрын
I have update the controller and now I can't use the drone because in the controller I can't watch It... I view the fvp camera but I don't watcha any information about the drone (gps etc). could you help me ?
@HUBSANOFFICIAL
7 жыл бұрын
Did you try rebinding the transmitter to the drone?
@pimp_beef1249
7 жыл бұрын
How I do that?
@superdave074
7 жыл бұрын
ANY HELP WILL HELP! JUST DID SUPERFLYER UPGRADE BUT NOW WHEN I TAKE OFF,THE QUAD GOES FORWARD AND UP AT THE SAME TIME. ALMOST LIKE A HELICOPTER REAL NOSE HEAVY. GPS HOLD IS IN GREEN WHEN PROPS ARE OFF BUT WHEN I ENGAGE THEM, GPS HOLD TURNS RED AND IM TOO SCARED TO GO ABOVE 5 FEET BUT WHEN I DID AND SWITCHED RETURN HOME, THE QUAD STARTED SOARING STRAIGHT UP. WHAT HAS HAPPENED. I FOLLOWED ANNE's TUTORIAL PERFECTLY WILL ALL SUCCESS BUT THIS IS NOT RIGHT. IS THERE A WAY TO PUT BOTH TRANSMITTER AND QUAD BACK TO FACTORY FIRMWARE???? it had v4.2.8 , H501s v1.1.9 and v1.1.9. I upgraded to v4.2.9 , H501s v1.2.12 and v1.1.22. I have the standard FPV2 standard transmitter. Can I somehow revert to what it came with....1.1.9?????
@HUBSANOFFICIAL
7 жыл бұрын
Did you calibrate your sticks?
@superdave074
7 жыл бұрын
I didn't the calibrate compass steps when Inplug in the quad to the battery. Rotate until green horizontally and the the second step with nose down until complete. Still flys wrong
@superdave074
7 жыл бұрын
I meant to say that I DID calibrate the compass after I plugged in the quad to the battery. The normal calibration is what I did.
@alandurden1826
3 жыл бұрын
when clicking on upgrade tool for RX V1.2.20 firmware, the tool keeps saying no upgrade tool connected , all previous steps done correctly TX screen shows upgrade RX mode V2. the FC Software on the quad updated ok no problems can you help
@jamescrammond6431
3 жыл бұрын
did anyone reply
@alandurden1826
3 жыл бұрын
@@jamescrammond6431 no, as always.
@Ehaobass
7 жыл бұрын
Hello I upgraded to the super flyer firmware package H501S-FC-V1.1.22 and the H501S RX V1 .2.12. It all was successful but when I bind to the quad there is no video feed on the remote. I have tried to bind it a few time but still no video. Any ideas?
@HUBSANOFFICIAL
7 жыл бұрын
I would recommend to try and upgrade again, something could be lost in the upgrade process.
@Ehaobass
7 жыл бұрын
Hello thanks for the reply. I downloaded the software again from the Hubsan home page and upgraded the software again. Rebound the drone and still no video feed.
@Ehaobass
7 жыл бұрын
I just noticed the video is coming through my FPV goggles but not on the controller.
@orangemen697
7 жыл бұрын
Lol, I hear the noise for connecting the controller but the software doesn't connect when i click connect.
@HUBSANOFFICIAL
7 жыл бұрын
It is likely that your computer is missing a driver to connect to the transmitter.
@PhillipC01
7 жыл бұрын
I have a? I have the advanced & I just upgraded my stock v1.1.21 to the superfly 1.1.22 & I already have rx v1.2.12 installed so, do I need to install the version that's included with the superfly pack or do I keep what I already have? I don't know if rx stated was improved for superfly & would need it to complete.Thanks in advance
@HUBSANOFFICIAL
7 жыл бұрын
You can use your current 1.1.22, there is no need to upgrade it again.
@PhillipC01
7 жыл бұрын
Ok well something isn't right then.Before doing the upgrade around 132 meters in distance was the most in distance I got.And now in same spot it's hitting invisible wall at 62 meters.altitude not much better.I haven't had a good weather day since Christmas to try again.
@radosawjasiak6293
6 жыл бұрын
Hi, can I connect to the H501A HT009 or HT011A controller
@HUBSANOFFICIAL
6 жыл бұрын
Yes.
@dzonipop1
7 жыл бұрын
Hi, I have hubsan h501s PRO and i have installed firmware for drone and transmitter and after that i have no longer connection between drone and transmitter. (Black screen and no camera view) Also i cant turn on motors... Its is falshing like transmitters in off. Can i somehow downgrade it and back to factory reset? Please help me. Dont know what to do. Best Regards, Nikola
@HUBSANOFFICIAL
7 жыл бұрын
To re-bind the drone to the transmitter, you will need to hold down the photo button and power the transmitter on, then put the drone close to the transmitter while you plug in the battery.
@dzonipop1
7 жыл бұрын
HUBSAN OFFICIAL My picture while recording is not clear. It is bad... How to change that? Thanks
@dzonipop1
7 жыл бұрын
Its out of focus.... How to fix it?
@TheJekyll007
7 жыл бұрын
hello I have recently updated my FC V1.6.25 and RX V1.2.16 but no RC can you provide firmware pls
@HUBSANOFFICIAL
7 жыл бұрын
There is no need to upgrade your transmitter.
@valteroliverr7990
4 жыл бұрын
Seus vídeos são shows como fazer um upgrade no 501m?
@stijnyc
7 жыл бұрын
i cant find the RC folder, just a TX folder
@HUBSANOFFICIAL
7 жыл бұрын
The RC (remote control) is the TX (transmitter).
@jeffmessick4830
7 жыл бұрын
Wow, Annie is the most competent and thorough tech support person I've ever watch. Impressive!
@debmariusz
7 жыл бұрын
hi i have a problem with my hubsan 501ss. After dropping and stopping the propeller (high grass) turns off. Did you have such cases? Regards
@HUBSANOFFICIAL
7 жыл бұрын
We aren't too sure what you mean. Perhaps send us a short video, or explain in more detail?
@debmariusz
7 жыл бұрын
Everything is ok as it flies but as if something hit and crash then it turns itself off and you can not find it. Regards
@HUBSANOFFICIAL
7 жыл бұрын
Are you saying that the unit turns itself off completely- including motors, LEDs and everything else? This might be a battery problem- try a new battery. If it still happens with a new battery or two, you'll want to email a video of this happening to service@hubsan.com.
@survivaldude29
5 жыл бұрын
I can't get the Firmware files
@mrbrewrites
7 жыл бұрын
Most of us are quick to point out things that don't go right, but slow when it comes to giving recognition and credit when we as customers are provided with the sort of support that we feel we deserve. The point I'm making is we shouldn't overlook it when a representatives of a company gets it right. I ran into a few issues while upgrading my firmware and upon emailing Hubsan I was provided a phone number to call and to my delight it was Annie that answered the phone. After explaining my issues she ask questions that let her know what might be causing them and provided solutions that would resolve them. I did the things she recommended and my upgrade was successful. As an Application Developer who has to deal with the company's business partners I know that it is not always easy dealing with those that you must support. The key is patience, and the understanding that we all have different skill sets. "Thank you Annie for the patience and grace that you showed in helping me to resolve my issues and get my quad back in the air" Hubsan should be proud to have you on their team.
@OfficialFatLip
7 жыл бұрын
stop kissing peoples rear, its their job!
@fudgedog123
6 жыл бұрын
mrbrewrites absolutely. I think Hubsan support is excellent. Professional, and friendly.
@kespurlin
6 жыл бұрын
Agreed. They did not have to tell you anything.
@harley62t
6 жыл бұрын
Annie, I just received my Hubsan H501s (no ss found on any labels) with the advanced controller. Drone flies perfectly. I assume there is not any need to upgrade firmware, right?
@OregonDARRYL
4 жыл бұрын
You should use "TX" for Transmitter - not "RC". That's what makes this confusing. Just change the damned letters. Thanks.
@rogojangigel3294
5 жыл бұрын
Do not be upset this firmware is supported by the Hubsan X4 AIR H501S Standard Edition .... Thank you nice ... I still have a question which is the original version of hubsan drone, there are many models and I am a little confused as I buy the original version but not I know what it is like, how can I distinguish them, what color should the packaging have in the original version, I will greet a great thank you, with great esteem and respect
@mick2one
7 жыл бұрын
ok guys can you do a video on updating the H501A if you dont have a transmitter and one where you do have either the standard or Advanced.. I have the advance transmitter glad to say it works wit the H501A so best of both worlds but the distance is not great fro flying or FPV signals..
@hawkkim1974
7 жыл бұрын
guess Hubsan should pay her more to get the firmware hell sorted out and organized. I understand this usually happens with start-ups but let's face it. X501s has some potentials. If not, we wouldn't be here. It is just a toy but at the same time it is a toy that can kill people.
@thelongranger55
6 жыл бұрын
How do I get the h502s camera model to work inside my h502e useing E remote as well , I can get a video only when I plug in the quad with h502e remote off , when I try to turn on remote to bind and calibrate the signal cuts off , do I need the h502s remote or do I need to update firmware?
@sandroserna6883
7 жыл бұрын
my Hands by five 1s 501's is doing a lot of sketching and it always for some reason when I have heard it keeps going to the left for some reason AutoZone and it's sometimes what's up in the air it turn to the left or to the right which other way on his own no I'm doing something wrong or what kind of modified it with an antenna and with both antennas I don't know if I know I'm pretty sure I put him on a ride but does it need to be upgraded or can you help me out here
@chrishammend3769
7 жыл бұрын
Hello can you PLEASE HELP ME? Your download link for the firmware FC upgrade for the H501S folder is missing. H501S-FC-V1.1.21 folder is missing. PLEASE HELP me find the folder or help me fix my drone because after doing what you showed to do my drone is stuck in firmware H501SS V2.1.1.22. and drone now will not fly at all. PLEASE HELP ME! ANNIE YOUR MY ONLY HOPE!
@firedog8868
7 жыл бұрын
Annie, Thanks to you and your team for the great presentation and walk-through on how to update the firm ware to the 501S. Your delivery method and attention to details such as making sure everyone could see exactly what is on the screen of your computer as you moved through the steps was pivotal. I was unsure of doing this update but after seeing the DW videos and his enthusiasm with getting others to make the leap along with the details you provided made it less stressful and easy enough that I successfully performed the update on my first attempt.
@HUBSANOFFICIAL
7 жыл бұрын
You're welcome! Kevin played a great part in this too, as the cameraman and also with advice on what needed to be showed. Props to him as well.
@georgiejr69
7 жыл бұрын
upgrading RX Receiving board. under the H501SS-RX V1.2.22 (SS only)- it shows both the H501A upgrade tool and upgrade tool V2. in your documentation dated 4/17, it says " if your stock version came with V2.1.16 and FC 1.1.31 then use FC H501S tool to upgrade." Since I have this version so I should be using H501A tool not the one mentioned in this video correct?
@virginia8beach8man
5 жыл бұрын
please, just get to the point! may I suggest that you watch your video without sound and with the intent of finding the specific key strokes or just a quick look at the cable hookup and you will see that it is VERY HARD TO WATCH YOU SCREWING AROUND WHEN I JUST NEED FOR YOU TO GET TO THE POINT! Got it now??!!!
Пікірлер: 757