Through Dovetail Joints: kzitem.info/news/bejne/pm6J2HxsgZR1l4Y Mortise and Tenon Joint:kzitem.info/news/bejne/sGOgxZN_j5iTmI4
@rikistoilov5686
3 жыл бұрын
Thanks.
@ericjohnson4768
3 ай бұрын
This is an old video, you may never see this comment. May I just take the time to say how appreciative I am of your taking the time to share the wisdom and knowledge you've gained, in such a clear, concise, unhurried way that it truly teaches. The respect you deserve is unparalleled and hopefully you can feel the appreciation of at least some of us out here.
@RobCosmanWoodworking
3 ай бұрын
Thank you, I enjoy sharing it and as a result we have been able to build a very good business. I try to live by the adage, “the more you give the more you receive”!
@dkbuilds
3 жыл бұрын
I love how your "sacrificial piece" to chop out the tail waste is a huge beautiful piece of walnut 😂 Another great video Rob & team, appreciate all the little details!
@RobCosmanWoodworking
3 жыл бұрын
yea, probably should not have done that
@bryancaviness8788
2 ай бұрын
Thank you for this. I’m still intimidated by this technique but I’m gonna tray a project.
@michaelpryce8954
3 жыл бұрын
I have friends that told me they cut their dovetails by hand and I said Riiiiiiiiiiiight. The through dovetail video was one of the most amazing things I have ever witnessed. It really can be done
@jimfiorentino7741
6 ай бұрын
When you mentioned Tase Frid, I thought I'd better pay attention. I grew up down the road from him and his family and their 4 horses. What a great family. Very well done video. Thanks
@Carpenters_Canvas
4 ай бұрын
Just bought your saw Rob!! cant wait for it to arrive, I was actually considering taking my Veritas (14tpi) dovetail saw and making the front a little more around 22 tip, but after thinking about it, it seemed like a terrible idea!!! so ill use it as a crosscut saw instead. What a fantastic idea of setting the teeth like that
@dpeteual
3 жыл бұрын
I made some comments. I am extremely pleased that Rob replied. His replies were on target and they helped me.
@RobCosmanWoodworking
3 жыл бұрын
I always try to reply too comments before the next video comes out
@garyvarley1426
2 ай бұрын
Great video and great camera work
@lesliecrowther7004
10 ай бұрын
It's a real pleasure to watch an expert and learn from their Experience as to how it's done. Very very informative indeed and you learn a lot from being shown just how to go about executing the very same finished article for yourself. Thanks again Rob Cheers Les.
@frankjones5948
2 жыл бұрын
I can not believe there's no test fit! Spectacular work and an amazing technique. Beautiful fitting dovetails like that are truly a work of art!
@Dunc2222
2 жыл бұрын
Outstanding instruction, videography and production. You are carrying forth the legacy of your great teachers exceptionally well.
@frederikmare9002
3 жыл бұрын
Fantastic video thank you!!!... One side finished, only 3 more to go 😉... Absolutely fantastic WOODWORK!!!... Building furniture with power tools is "accurate carpentry (my own term)" rather than woodwork!... You are doing woodwork!!! I believe where any woodworker TRULY CONNECT with the wood is while paring (with super sharp chisels of course) a joint to fit perfectly!... Something that's not necessary when using power tools!... However, there is no comparison at all! When it comes to woodwork, you are an absolute MASTER!!! Thanks for sharing! 👋👍
@andrewbrown8148
3 жыл бұрын
Love seeing the dovetail master at work~! I'm practicing my thru-dovetails, but am excited at the idea of doing half-blinds next. I guess a Kerf X10 is in my future. Thanks, Rob~!
@RobCosmanWoodworking
3 жыл бұрын
I have one just for you!
@chrisfleming7288
3 жыл бұрын
I'm 58 and am so interested in woodworking as a hobby. I've watched nearly all of your videos. They're so good! You make it look easy but I know it's not. Practice makes perfect after all. I'm gonna go ahead and jump in! Thanks for all of your teaching.
@RobCosmanWoodworking
3 жыл бұрын
Thank you for watching and commenting. Woodworking is a very relaxing and enjoyable hobby. You ate creating stuff with your own hands. You should consider taking one of our training the hand classes
@timdoyon1964
2 жыл бұрын
You are an excellent teacher, and I have learned so much from you. Thanks Rob! Wishing you and yours a Merry Merry and a Happy Happy from Tim in Oklahoma. ☮️ PEACE!✌️
@thomassutrina7469
3 жыл бұрын
See the glue nozzle cap is the type I always found hard to open after the glue dries. No longer a problem. I found a washer with the ID that is bigger then the cylinder but smaller then the flange. Now you have a big disk to pull up on. The only issue is that the washer needs to be centered to fully close the cap. Would have supplied a picture.
@RobCosmanWoodworking
3 жыл бұрын
good tip
@rossminty9639
Жыл бұрын
Great video your a good teacher, going to give this a go tomorrow, keep these videos comming.
@garthwebster6433
2 жыл бұрын
Awesome video, Rob. I use your dovetail saw-blade marking knife. Rather than saw past the baseline, I ground off the top of the knife at such an angle to allow it to reach down to edge of the tail board when transferring for the pins. Works great. Thanks.
@davidcampbell2845
3 жыл бұрын
Incredible consistency in the quality of the education, Rob. Superb reinforcement. You should get an award for the teaching as well as the craftsmanship!
@RobCosmanWoodworking
3 жыл бұрын
just get more folks to watch our videos!!!!!!
@bluebug66
3 жыл бұрын
Beautiful craftsmanship
@RobCosmanWoodworking
3 жыл бұрын
Thanks. You can do the same
@brianmiller6304
3 жыл бұрын
I've watched you do this several different times and I think this is the best one yet. Still refining my thru dovetails but am working up the nerve for half blinds. ps: super happy with my new cross cut joinery saw. Highly recommend to anyone. Truly a life time saw.
@RobCosmanWoodworking
3 жыл бұрын
Great to hear. Keep practicing....soon you will have it down snd making perfect dovetails
@nmfam
Жыл бұрын
You are truly a woodworker
@howardbigham1880
3 жыл бұрын
Well done as always Rob. Great camera work Jake.
@RobCosmanWoodworking
3 жыл бұрын
Jake is a camera wizard
@rwdyer2263
2 жыл бұрын
Thank you Rob for your excellent teaching style and all the great information. I’m really enjoying all of these dovetail videos. I’m rebuilding the deck hatch for my 1961 Pearson Electra sailboat out of ipe wood and I am planning to use dovetail joints
@mattslater4605
5 күн бұрын
Amazing work Rob. But you must have a different dictionary to me. Not sure what I watched meets the definition of Easy. Wish I could cut dovetails half as neatly.
@celiabaruchin4191
2 жыл бұрын
Wow. Just wow. Thanks, Rob.
@mikaelfischer8429
3 жыл бұрын
Thanks for sharing Rob, Great information and will be giving this a try. I just received my apprentice sharping system from you guys today and will be sharping a few chisels this weekend.
@RobCosmanWoodworking
3 жыл бұрын
Sounds great. What chisels do you have?
@mikaelfischer8429
3 жыл бұрын
@@RobCosmanWoodworking I have a few of the Narex chisels, they are not really the best but i am trying to save money to buy some wood river or lie Nielsen's.
@johnnorris1546
3 жыл бұрын
@@mikaelfischer8429 Nothing wrong with the Narex but if you want to upgrade you cannot buy better than the IBC
@mikaelfischer8429
3 жыл бұрын
@@johnnorris1546 Thanks John, I will check out the IBC chisels as well. I may have to buy one at a time but will have a complete set at some point.
@mikaelfischer8429
3 жыл бұрын
@@RobCosmanWoodworking Well as of 5 minutes ago, I went for it and just bought my first set of high end IBC chisels from you. Thanks Rob for your videos.
@Patmanduu
3 жыл бұрын
Appreciate the solid video editing and camera work. 👍
@RobCosmanWoodworking
3 жыл бұрын
No problem 👍
@nomadhawg
3 жыл бұрын
Beautiful dovetails. I can’t even make a straight saw cut so this video is forever ahead of my ability but I love it. Thanks for the video!
@THEDUTCHT0UCH
3 жыл бұрын
look into magnetic saw guides. i just my hands on the katz-moses one and i think it's going to help me a lot.
@HondoTrailside
2 жыл бұрын
Just practice straight cuts. Don't practice cutting dovetails, just practice dropping the saw down in a straight line. As Rob has pointed out, you don't need to be perfect. I am not talking about years of practice, 10 minutes of pure practice where you are not worried about making a mess of a project, can go a long way. The keys for me are: To have a decent saw, it doesn't have to be all that expensive, but it needs to be a real dovetail saw. When I started, real dovetail saws were not being made. There were Japanese crosscut saws, hack saws, some saws that claimed to be dovetail saws, but were dull and cut a trench, etc... Today there are no supply related reasons not to have an actual saw. Let the saw do the cutting. Keep the sawing relaxed, use as full length strokes as you feel comfortable making. Don't get into the habit of just using the an inch or two of the saw, and pressing down because progress feels slow. Keep it smooth. Observe the gap line next to the blade where it enters the top of the board. Keep that visible reference parallel, as much as you watch the layout line. Concentrate on having a non-binding drop. Practice making cuts one after another in some scrap, do some of these to start with, without a guide line, develop the feel before you start following a line, as trying to keep the saw on the line can end up making you try bending things into place. Smooth and flowing. When you first address the board, place the saw on your layout line, or square to the imagined cut if you are not using a layout line (for practice), and once it feels right, close your eyes and lift the saw off the board, put it back down on the board, and get comfortable, now open your eyes. Often you will see that your saw's position is no longer square to the cut. Adjust your body to the new position. When you are learning you can do this often, until you naturally assume a correct position. This will make your saw stroke more natural and flowing and the saw will want to drop on the line. I have been cutting dovetails for 40 years, but I don't cut them every day. Or even every month. I observe the above points every time. I do a minute or two of practice sawing before I cut an expensive piece, like a batter warming up before going to the plate. I separate practice from projects.
@jackw9034
2 жыл бұрын
Excellent, thanks for the refresher course.
@DannyStocklin
6 ай бұрын
Hi Rob. Very informative video. If you have never done a short video on sharpening one of your half-blind dovetail chisels can you show us please or maybe explain in a reply. Very curious as to how you get the sides of the chisel sharp since all three sides are sharpened. Thank you Rob.
@chrisjordan4210
3 жыл бұрын
Rob great tutorial Ain't wheel marking gauges the greatest tool ever invented, always remember using the blunt pin gauges in school woodworking class wander all over the grain and the teacher saying "a bad workman always blames his tools", wish I'd known - I could've said "yeah and in thirty years time I won't have to"
@RobCosmanWoodworking
3 жыл бұрын
I love them
@barryomahony4983
3 жыл бұрын
Brilliant method; very ingenious.
@laurencegoedar462
3 жыл бұрын
Kerf x 10! Man you should have called it The Kerf Wizard! Unbelievable.
@RobCosmanWoodworking
3 жыл бұрын
Where were you when we were naming it??????
@displaychicken
3 жыл бұрын
You’re a national treasure
@Tilburger72
Жыл бұрын
Thanks for this great video again. I have to make these joints soon and it's a great help. I live in Europe so i have to find an alternative for your marking knife and X-10 because they look really helpful in cutting this joint.
@carlogle6207
3 жыл бұрын
Outstanding instruction! Thanks, Rob.
@eoj1823
3 жыл бұрын
Beautiful job. Great instruction, really enjoyed the education. Thanks.
@RobCosmanWoodworking
3 жыл бұрын
You are very welcome
@rutgerhoutdijk3547
3 жыл бұрын
if you have a bandsaw, you can resaw the piece of wood, do a normal dovetail, and glue it back together.
@RobCosmanWoodworking
3 жыл бұрын
Yes that works and sometimes I do a version of that. We actually have that for a video coming up
@kearneyfamilylondon68
3 жыл бұрын
Brilliant!
@RobCosmanWoodworking
3 жыл бұрын
thnaks
@gaz1967
3 жыл бұрын
Great job, I've used a thin steel rule in the past to do the same job as your X10.... Your X10 though is a great idea.
@RobCosmanWoodworking
3 жыл бұрын
Yes, Taig Frid told me about it
@user-de2hz4ru8x
3 жыл бұрын
Thank you for the lesson! It was very interesting and informative.
@RobCosmanWoodworking
3 жыл бұрын
You bet. Glad you liked it
@walterrider9600
3 жыл бұрын
thank you Rob
@67Bahloo
3 жыл бұрын
Impressive enjoyable to watch. Thank you
@b1j
3 жыл бұрын
I’m drawn to the marking knife: just placed my order. Anything that can start off the cut right make sense to me. Rob has made the process formulaic and recipe-like, leaving just two steps that rely on raw skill: sawing the tails square to the face and sawing the pins square to the end. For the pins he’s thought through getting the cut started (see above). That leaves one key step: starting the tail cut. I wonder if the marking knife could double as a kerf starter for the tails, too. Big open question. I’ll let you know when it comes in the mail. The rest of it is sawing straight once you’ve started. I can already attest that I’m having greater success with Rob’s saw than with my pull saws so far.
@1deerndingo
3 жыл бұрын
What a great video. Well structure, simple to follow, entertaining, interlaced with years of experience and knowledge. What else could you ask for. Thanks Rob. Q. Is there a simple way of setting out uniformly varying dovetales. IE. small, medium, large, medium, small for a five pin joint.
@RobCosmanWoodworking
3 жыл бұрын
Glad you enjoyed it!
@CaptainZybar
3 жыл бұрын
Hi Rob, I have been watching many of your videos, current and from years past. I’m 70 years old, still working, but I now get up daily excited about learning and producing. You are a great educator! I have some similar issues with eyesight. I notice you have changed your “vision assist” gear recently from the grey with inset lenses, to a white set with lenses hanging below and in front of your glasses. Can you tell me what the near device is? Do they augment your glasses which you already seems to use for close up work? Thanks again for your superb teaching.
@RobCosmanWoodworking
3 жыл бұрын
I do not wear my glasses with my headgear, Jake got the new ones for me and they are still in the trial phase, dont know if I like them better than my old ones yet
@thewoodlesworkshop.157
3 жыл бұрын
Wow! Fantastic work! Thank you very much for the interesting and useful video. I look forward to the next master classes. :) Take care of yourself there.
@RobCosmanWoodworking
3 жыл бұрын
Thanks for watching and commenting
@arlie505
5 ай бұрын
the wood surgeon !
@capncharlie7894
2 ай бұрын
Great video. Why don't you glue the end grain? Isn't that wood stronger than the face grain?
@garyhome7101
3 жыл бұрын
Great video as usual! I bought your video of the same process a while back also, but this presentation is better. Faved and saved on KZitem! I noticed your new head set magnifiers, I bought the same a few months back and for the most part they do a pretty fair job. I like that they came with several extra snap on lenses too. The l.e.d. lamp is OK, but my one gripe is it doesn't stay tight on my head. Always seems to loosen while I'm working and slips down on my forehead. I guess that's the price for having a pinhead!
@RobCosmanWoodworking
3 жыл бұрын
I am still in the testing phase of mine
@williamshaffer2562
3 жыл бұрын
Exceptional as usual Professor Cos. I can do thru dovetails pretty fair. Guess I will tell Santa I need a Kerf x10 and a dovetail chisel for Xmas. Don't think he has a new body that doesn't shake, LOL, so maybe the extra gear will help the old guy out, me. Stay safe. Semper Fi.
@RobCosmanWoodworking
3 жыл бұрын
Happy holidays!
@charliepetricone8974
Жыл бұрын
Wow, very nice!
@mariusz7627
3 жыл бұрын
Greetings from Poland. 😁🇵🇱
@RobCosmanWoodworking
3 жыл бұрын
Hello
@dpeteual
3 жыл бұрын
I also noticed that the blind gage line on the pin board left a mark on the end of the pins. Theoretically you won't be planning the ends of the pin boards because they are already fitted to the drawer width.
@RobCosmanWoodworking
3 жыл бұрын
In practice the pin board (Drawer front) is fitted exactly into the drawer opening so when fitting you do take a few passes of the end grain.
@mattmaxey5864
10 ай бұрын
My half blind dovetails always come out better than my through dovetails. I think its because with the half blinds I'm only focused making sure 2 planes of the wood matching perfectly. With the through dovetails I have to worry about 3 planes.
@PaulSeminary
3 жыл бұрын
Great video and it does help !!! Thanks
@RobCosmanWoodworking
3 жыл бұрын
Glad to hear it!
@billcoley8520
3 жыл бұрын
I tried cutting dove tails today. Total failure. I am blaming the Irwin saw. Personally I like the very thin Japan made saw . I’m still learning Rob.
@Alex-qp8ym
8 ай бұрын
You set the marking gauge off the thickness of the pin board before you cut the rabbet in it. Won't that throw off the marking gauge setting?
@bearthompson6506
3 жыл бұрын
Beauty!
@mauricelappin9666
Жыл бұрын
Amazing
@chordshape8753
2 жыл бұрын
Thank you
@squirtlegiles4452
Жыл бұрын
Hi Rob, planning to do some of these soon. Could you use a mini X10 (length of tail) with no handle that you can gently tap instead of the marking saw blade knife? Would this work and prevent sawing past the line on the tails? Cheers, ash
@DogDog173
3 жыл бұрын
impressive!
@Henry.Bendik
3 жыл бұрын
Another great tutorial, thanks Rob! Before getting that awesome dove tail chisel, I'm asking myself, "how on earth will I sharpen that?"
@RobCosmanWoodworking
3 жыл бұрын
Just like any other chisel. See my chisel sharpening video
@dpmeyer4867
3 жыл бұрын
thanks
@GARDENER42
2 жыл бұрын
I'm thinking one could make a pair of skew chisels (one left & one right handed) by modifying standard bevel chisels or pre manufactured to the desired angle?
@hassanal-mosawi4235
3 жыл бұрын
Thanks for sharing that
@RobCosmanWoodworking
3 жыл бұрын
Thnaks for commenting
@klgklgklgklg
3 жыл бұрын
Do you add a bit to the length of your pin board to account for the shallow groove you put in the tail board to ensure the drawer fits in its opening?
@Realism91
8 ай бұрын
I had an idea, if someone owns a power chisel that's smooth they could make a chisel from a scraper blade the same thickness as the kerf. I'm assuming it'll work I don't own one to test it.
@abdulahahmadzai9461
3 жыл бұрын
Amazing video tremendous amount of detail I wanted to ask, is there any faster way to chop/remove the waste off the pins?
@RobCosmanWoodworking
3 жыл бұрын
Not by hand
@abdulahahmadzai9461
3 жыл бұрын
@@RobCosmanWoodworking thank you
@emersonassis7154
3 жыл бұрын
Hi Rob.One more time an amazing video.I have one question.About LN #140 skew block plane for a person right hand what is the better choose , skew for right or left?
@RobCosmanWoodworking
3 жыл бұрын
Get the same skew as your dominate hand
@b1j
3 жыл бұрын
Rob, can you hit the Kerf X-10 with a metal hammer? I use a 375 g Daruma Genno steel hammer. It seems that would dent the back of the X-10. Do you agree?
@MAPIOH
3 жыл бұрын
Thanks.. Subscribed..
@marka2746
Жыл бұрын
Hi Rob. Really enjoy your videos. Question if I may. I'm using Western Maple for drawer sides, 1/2"x5". I"m getting a massive amount of tear out when I chop the waist from the pins. I like to think my tools are sharp, honed and stropped. Drawer side clamped to a piece of scrap, but the cross grain portion of the joint looks like the mountains of the moon. Any thoughts?
@RobCosmanWoodworking
Жыл бұрын
Low angle primary bevel, we use 17 degree. Makes a huge improvement on that kind of tear out.
@omerofaggionato4405
3 жыл бұрын
Spettacolare!!!! What can we do with a plane and some chisels
@wrstew1272
3 жыл бұрын
Rob- is the mallet head resin infused? I know that my friend head would be stouter if so!
@RobCosmanWoodworking
3 жыл бұрын
yes
@andrewpinson4360
3 жыл бұрын
Rob this is the year I win the lottery, so you need to get your elfs on those Christmas tools for us. I see a number of them are missing.
@RobCosmanWoodworking
3 жыл бұрын
The elves are busy at their workbenches
@Mr86clair
3 жыл бұрын
Hi Rob Would you please tell me how high your work bench is and how tall you are. You appear to be planing wood at a comfortable height whereas I have to bend forward to plane on my bench. Thanks
@RobCosmanWoodworking
3 жыл бұрын
36 1/2”
@andreicharpentierquesada4530
3 жыл бұрын
I had never seen something like the tool you used to finish the cut. Have a name or you designed it?
@RobCosmanWoodworking
3 жыл бұрын
My design. I call it the Kerf X10
@joew694
3 жыл бұрын
@@RobCosmanWoodworking IMO, once you use the Kerf X10, you'll never go back. A must-have for half-blind DT's.
@Kunfucious577
3 жыл бұрын
Watching your videos make me want to quit work and cut wood.
@rikistoilov5686
3 жыл бұрын
Thanks for the lesson again, but i want to ask for suggestion. I want to try and build wardrobe with sliding doors but im not sure what joint to use there because by opening the doors there will always be some sort of hard hit on the sides and i dont want it to broke after a while. Any idea is welcomed and thanks again.
@htcinfinity
3 жыл бұрын
Soft opening hinges.
@rikistoilov5686
3 жыл бұрын
@@htcinfinity thanks that should work also but i meant what would be the strongest joint?
@RobCosmanWoodworking
3 жыл бұрын
Sliding doors that just slide left and right? Why not stnadrd doors tha swing open, that is what I would do
@rikistoilov5686
3 жыл бұрын
@@RobCosmanWoodworking its mostly because space the distance from the bed to the wardrobe would be roughly 60-70 cm. And i want the wardrobe to be 2 meters wide.
@jjwouters6436
3 жыл бұрын
Great video Rob and Jake.! I have one question, I've watched your other through dovetail and halfblinds videos, but for some reason I can't figure out why you off set sawblade kerf? Is it to make the joint tighter or reduce gap?
@RobCosmanWoodworking
3 жыл бұрын
You offset so that you end up sawing exactly on the edge of the pin where it meets the tail. If you did not offset there would be a gap the size of your kerf on each side of every tail
@jjwouters6436
3 жыл бұрын
Ok, that makes sense, thanks I appreciate it!
@thefleetfarmer1815
3 жыл бұрын
Don’t you have to measure the thickness of tail board after you cut the rabbit? BTW Rob you have that “natural” affinity for teaching, I often wonder if you talk your way thru cutting dovetails when ur alone lol
@RobCosmanWoodworking
3 жыл бұрын
You can take the measurement before or after th erabet as long as you account for th ethickness. I recommend taking the measuremt after cutting the rabet.
@zaredshawver9496
3 жыл бұрын
Why did you set the marking gauge for the tail board before cutting the rebate?
@RobCosmanWoodworking
3 жыл бұрын
You are correct. I made a mistake
@rogerlyons209
3 жыл бұрын
is that the 173rd patch?
@1deerndingo
3 жыл бұрын
Is there a simple way of laying out uniformly varying dovetals. IE. small, medium, large, medium, small for a five pin. Or small, medium, small for a three pin.
@RobCosmanWoodworking
3 жыл бұрын
When you mean varying sizes, varying how? Thickness of pins, length of pins, or size of space between pins?
@1deerndingo
3 жыл бұрын
@@RobCosmanWoodworking Width of pins. I was looking for a way similar to the way you use dividers. I can't see a way of that working. The only way I can see is to decide on a unit of division (IE. 3mm) and use multiples of that unit. So, side space = 2, space between pins = 1, outer pins = 3, centre pin = 4. Hence this three pin design would be 15 units, or in this case using 3mm units it would be a 45mm wide side board. Layout the pin design and then trim to width. The problem with this system is for this simple 3 pin unit then increasing the division unit by 1mm increases the width by 15mm (7/8"). Hence, my search for a way of using the dividers. They reference the existing width of the board as it's base unit.
@jaimegenovajr3257
3 жыл бұрын
Hi new on your channel. I cant find a kerc x10 anymore, you know any sites to but it? Thanks
@brianocarra4244
2 жыл бұрын
Lapped dovetails
@bouhunter6176
3 жыл бұрын
Rob what do think off the tapered dovetail saws, I know you don't sell one
@RobCosmanWoodworking
3 жыл бұрын
Its a gimmick. The only reason the old saws are like that is because when you sharpen them all the time that happens. Just learn to saw level
@dukeengine1339
3 жыл бұрын
How do you sharpen the special chisel? Just on the front or also the two angled sides? Is there a different way to trace the pins with the knife instead of doing that extra angled sawing? I disliked that new action a lot, it seems at the finished work that you made a beginner mistake...
@RobCosmanWoodworking
3 жыл бұрын
You sharpen the half-blind chisel just like any other chisel. the angled part doesn't need to be real sharp as its main job is to allow the front to getinto the corner, I dont think I have ever sharpenedmine. If I did I would just take a fine file to the angled sides. AsI said in th evideo you can just do the normal tracing (e.g. loke through dovetails) just dont go past your line on the pin board as that would show. You just have to eyeball the plumb part of your cut, which can easily be done. I dont understand your comment, " it seems at the finished work that you made a beginner mistake..." please explain
@RobCosmanWoodworking
3 жыл бұрын
Well we throw it out there and you get to take what you want.
@dukeengine1339
3 жыл бұрын
@@RobCosmanWoodworking all clear to me, thank you!!!
@gurshaanbasra3639
3 жыл бұрын
Can you use tools that normally people would have like standerd not fancy tools?
@RobCosmanWoodworking
3 жыл бұрын
Which tools are you referencing?
@gurshaanbasra3639
3 жыл бұрын
@@RobCosmanWoodworking like not the marking gauge, the dovetail chisel, dividers, you know all those tools. I'm sorry but I don't have those tools but I really wanna know how to do this. Hope you can help, thanks
@RobCosmanWoodworking
3 жыл бұрын
Like this? kzitem.info/news/bejne/tGqssqytjpNmrI4
@gurshaanbasra3639
3 жыл бұрын
@@RobCosmanWoodworking thank you, can this be applied to halfblind aswell?
@gurshaanbasra3639
3 жыл бұрын
@@RobCosmanWoodworking I should probably add I'm a woodworker/constructor aswell and have a shop in my garage 🙃
@bmr8672
2 ай бұрын
Plum?
@dpeteual
3 жыл бұрын
I think Rob made a small mistake. He set the base line by measuring the thickness of the tail board. Then He cut the rabbet. The base line should have been set using the thickness of the tail board after the rabbet was cut.
@RobCosmanWoodworking
3 жыл бұрын
either way works
@dpeteual
3 жыл бұрын
I understand Rob's reply. The procedure appears to depend on how deep the rabbet is and how you set the marking gage. I often make the rabbet deeper than Rob does so I need to be carful to take the rabbet into account when I set the Marking gage.
@BrantAerials
3 жыл бұрын
I use 2 layers of painter's tape and use the marking gauge to cut the rabbet out of the tape. Make sure the marking gauge blade goes through the tape and into the wood.
@user-kp9yf1zj5k
6 ай бұрын
WTF - ...on Step 357... this has to be the most complicated way to cut a half-blind
@RobCosmanWoodworking
6 ай бұрын
Send me the link to your video so I can compare.
@user-kp9yf1zj5k
6 ай бұрын
@@RobCosmanWoodworking Sorry, didn't mean to be so harsh. I don't have a video. Guess it's kind of old-school...just use a dovetail saw, couple of bench chisels and a fishtail chisel (other than what's required for markup). Granted it took some time to get proficient with these tools to get good results, but that pays off in so many other ways. I'll sometimes I drill along the baseline to break up the cross fibers. I do like how you finish off the saw cuts with your tool and may give that a try.
@kenostermeier5114
2 жыл бұрын
Over cuts are poor craftsmanship!
@RobCosmanWoodworking
2 жыл бұрын
Who is speaking, show your work?
@simpletonballsack
Жыл бұрын
Big OOPS showing on the third pin at 49:31 but it is a test piece.
Пікірлер: 173