I love them all! I am new to soldering, and so excited I found you. I am going to have to try this. I never thought about the soldering the wire decorations. Thank you!!!
@karensintuitivejewelry
6 күн бұрын
Thank you kindly! I appreciate your interest & support! 🙏😊💖
@lindalooloo2
Ай бұрын
Gorgeous work, thanks for sharing your process
@karensintuitivejewelry
29 күн бұрын
Thanks very much! My pleasure! I appreciate your interest and your support! 🙏😊💖
@barbhuppert
5 ай бұрын
Love your pumpkins, both the silver and patina are stunning!
@karensintuitivejewelry
5 ай бұрын
Thanks so much! 😊 I appreciate your support! 🙏😊💖
@MarieIIe
Ай бұрын
If you cut slits in the foil previous to wrapping the “stone” or before pressing the foil down, it is much easier to get a good result. A rule is that the more curved, the more slits.
@karensintuitivejewelry
Ай бұрын
Thx for your comment & Yes I use the technique especially with sharp corners! I appreciate your support! 🙏😊💖
@RichardDavidMichael
5 күн бұрын
Triazolam, generic Halcion, great stuff.
@karensintuitivejewelry
4 күн бұрын
Interesting reference 😂
@foxiepoxi9245
11 ай бұрын
They are all beautiful! I myself am drawn to the shiny one too. 😊🤍Thank you kindly for showing us your tips & tricks also. I truly admire your tenacity, it's inspiring! I'm excited to see your next creation. It's good to have you back!!! Take care & would love to see Missy on another hunting excursion lol. Byeeee 💜🌺🤍
@karensintuitivejewelry
11 ай бұрын
Thank you kindly! You’re very kind! These were fun & are being well received, I might have to make more as I’ve already sold 2!!! I’ll be sure to do a quick clip of Missy just for You! 🙏😊🎃
@foxiepoxi9245
11 ай бұрын
@@karensintuitivejewelry I'd love that Karen!!! TYSSM! Your pumpykins are wonderfully beautiful! 💜🙏🎃🐕
@mostlyplantbased7096
11 ай бұрын
Just found your channel new subscriber!
@karensintuitivejewelry
11 ай бұрын
Thx so much for your interest & your support! 🙏😊🎃
@miak6859
11 ай бұрын
Hello 👋 Karen They are just to Adorable! I Love each,and everyone of them just Stunning. Thank you for sharing these little cuties with us.
@karensintuitivejewelry
11 ай бұрын
Ahhh thx very much! They are a HIT! I appreciate You! 🙏😊🎃
@tansygirl51
11 ай бұрын
I love them all but my favorite is the silver.
@karensintuitivejewelry
11 ай бұрын
Thank you so much for your interest & feedback! I too favor the bright & shiny but Man so many people absolutely love the patina look! I appreciate you subscribing to my channel & if you know anyone else who might enjoy learning or just watching please share & ask them to subscribe as I’m hoping to reach KZitem’s GOLDEN 1000 subscriber number! Thanks again for your support! 🙏😊🎃
@itsybitsyimaginarium8720
11 ай бұрын
I love them all but i think the large one with the stamp detail in the back is my favorite 😍 I'm glad you're feeling better after your dentist appointment ❤❤❤ I'm terrified of the dentist too xxx
@karensintuitivejewelry
11 ай бұрын
Thank you kindly! People are loving these pumpkins, who knew? I’ve already sold 2 so I might have to make some more as these were earmarked for the local shops! Your favorite pumpkin was the 1st to go! Thx about the dentist…I’m so happy with this new Dr! I’ve currently got ALL female professionals on my health team & I’m grateful! 🙏😊🎃🧡
@itsybitsyimaginarium8720
11 ай бұрын
@@karensintuitivejewelry that's awesome
@jennifermelvin8038
11 ай бұрын
Karen-these are my favorite Halloween projects!!! They are so flipping cute!!! Of course, the bright silver is my favorite…I agree with you that some of the details are lost with the patina… the stones don’t look as vibrant with the patina either… but the designs themselves are so cute!!! 🧡🧡🧡 Glad your dentist appt went well!!! Can’t wait to see what you do next!!! Love & hugs
@karensintuitivejewelry
11 ай бұрын
Thx so very much my friend! I’ve already sold 2 of the pumpkins with the patina so there you have it, right? People love the antique look! I’m probably going to make more since they’ve been so popular! I was making them for my local shops & now I only have 2 to take! 🤣🤣🤣 I’m not really complaining!
@jennifermelvin8038
11 ай бұрын
@@karensintuitivejewelry Wow, that is great!! I’m just going to have to agree to disagree with those patina loving people🤪🤪🤪 They are definitely adorns!!!🧡🧡🧡. No problem making more when they are selling so good… since they are pumpkins and not jack-o-lanterns- they would be popular/appropriate all of Fall up to Thanksgiving really!!! I think you better get the pumpkin pendant factory going my friend😉 Love & Hugs
@freedomfirst4590
4 ай бұрын
I just love them, thanks for sharing !
@karensintuitivejewelry
4 ай бұрын
Glad you like them! Thx so much for your interest & support! 🙏😊💖
@tiffany8931
11 ай бұрын
Stunning! I'd love to get a pumpkin necklace for the fall! I'm going to check out your etsy. 😊❤
@karensintuitivejewelry
11 ай бұрын
Thank you so very much for your kind words! I’m happy to have you join me on my journey! 🙏😊🎃🧡
@jennifermechling1272
3 ай бұрын
Adorable and so pretty!!!!
@karensintuitivejewelry
3 ай бұрын
Thank you so much! I appreciate your interest & support! 🙏😊❤️
@kjirstenboucher9682
9 ай бұрын
First video I've watched, and so much helpful information! These are just adorable designs too. Thanks for sharing! 😊💖 Subscribed!👍
@karensintuitivejewelry
9 ай бұрын
Thank you so much for your feedback! I’m thrilled you found some helpful information! I appreciate your interest & support! 🙏😊🧡
@kjirstenboucher9682
9 ай бұрын
@@karensintuitivejewelry Oh, thank you for sharing your knowledge and talents!👍😊 Lol, I just found your channel, and I've been binge watching. Loving it!💖
@karensintuitivejewelry
9 ай бұрын
@@kjirstenboucher9682 that’s amazing! Thank you so much! 🙏😊💜
@Sarah-Hoe
4 ай бұрын
You have helped me so much!!! Idk why I never thought of a towel! Thank you!!!! I may keep mine damp so I don’t scare myself 😆 I’m so excited to solder today! Thanks for sharing your work with KZitem ❤
@karensintuitivejewelry
4 ай бұрын
Glad I could help! Keeping your washcloth damp is a good idea too! Using the washcloth to hold my pieces was a game changer for me! Thx for your interest & support! 🙏😊💖
@carlasandstrum3849
5 ай бұрын
I love your work- I also have a dentist phobia due to a dentist in my past verbally abusing me as he was pulling my tooth- my tooth was really hard to get out and he wasn’t happy about it
@karensintuitivejewelry
5 ай бұрын
Thanks so much! I appreciate your interest & support! 🙏😊💖 I think dentists have finally realized how terrifying they are!!! 🤣
@aussiemachandmadeeverything
4 ай бұрын
I love all of them, did you patina with a small paint brush & how did you get it off the wires, i find that when i put jewellery elements on my suncatchers that are just charms, trying to keep them from getting patina on then isnt always easy, can you film the whole process of the pumpkin necklace patina cleaning it & polishing it Thankyou i love yr work just awesome 😊❤
@karensintuitivejewelry
4 ай бұрын
Thank you kindly! I appreciate your interest & support! In the attached tutorial you can see the exact process that I used in the pumpkin tutorial! It’s a delicate balance trying to avoid getting the patina on areas that you don’t want it but it’s doable using very small amounts on a Q-tip & then buffing off what you want to return to a high shine! Care must be taken not to buff too much to avoid taking any coating off your wire or charm attachments! Another technique I’ll sometimes use is applying acrylic paint or black nail polish to the recessed areas instead of the black patina solution & then clean-up with acetone polish remover! You must also be mindful of the fact that the acetone could damage your gemstones! I hope this helps! 🙏😊💜 kzitem.info/news/bejne/zXl-3p2BaqV4f4osi=86p0qSyXJhD-2vMH
@angelabatstone2975
11 ай бұрын
Well I am confused because I'm a patina girl all the way and I voted for patina but at the end I liked the shiny best, it was so bright compared to the others and you do see the tendrils better. So now I leave this a bit confused lol but all are just such fun pieces to enjoy🎉
@karensintuitivejewelry
11 ай бұрын
I’m 100% with ya on this! I’m happy to hear it wasn’t just ME! 🤣🤣🤣 Thx so much for your feedback & support! I appreciate You! 🙏😊🎃
@The_doormat
6 ай бұрын
❤. I really loved how these turned out. Love love love!!! I wish we could have seen how you curled and attached the tendrils. You briefly mentioned it just after the 27 min mark but im curious as to how you attached them and how you keep them from snagging and bending. Keep up the brilliant work 😁
@karensintuitivejewelry
6 ай бұрын
Thank you kindly! I attached these tendrils at the top while they’re still straight in the exact same manner as all the other wire & at the end of the project just take your round nose pliers & turn the wire into little spirals stretching to create an elongated spiral!
@lauriesbella1252
11 ай бұрын
Hi Karen I like the shiny without the patina.. But all 4 where really beautiful. You are truly a artists.. I will try to make it let you know how I did.. I did try the witches hat. Yours looked so much better then mine. I think I went to big..
@karensintuitivejewelry
11 ай бұрын
Thank you very much! You’re so kind & encouraging! I appreciate you! Yes, let me know how yours turn out! The hats are definitely the hardest of the projects & I agree with the size portions! Keep at it! 🙏😊🎃🧡
@staceycohen7395
11 ай бұрын
Im so happy i found your channel. Thank you so much for sharing your wisdom!!! I would love to know how you patina and what product you use.
@karensintuitivejewelry
11 ай бұрын
Thank you so much for your interest & support! For soft soldering projects you intend to patina you will use Novacan black patina for soft solder. If you intend on using copper or sterling silver projects you need a different solution to achieve the aged look such as Liver of Sulfur. Any metal that has a coating will not accept a patina of any kind. I hope this helps! 🙏😊💜
@aussiemachandmadeeverything
2 ай бұрын
Hi Karen I was going To ask because soft solder is relatively new to me, you patina the necklaces which could touch skin, would you patina rings as well, patina is poison Thankyou for sharing i love these pendants my favourite ❤
@karensintuitivejewelry
2 ай бұрын
Thank you for your interest & support! Although the patina solutions are toxic in their liquid form & should be used with precautions; once applied, washed & dried the item is safe to wear unless the individual has a propensity to allergic reactions. You can also apply sealants but individuals can also be sensitive to sealants! Patinas are generally viewed as “safe” in various jewelry making techniques! Patina is a naturally occurring chemical reaction to the metals exposure to the environment & chemicals such as humans pH, perfumes, soap, etc. Patina applications are just a way to speed up the natural process! The majority of individuals do fine with patina jewelry! I hope this information was helpful!
@aussiemachandmadeeverything
2 ай бұрын
@karensintuitivejewelry Thankyou so much for yr reply & I'm sure yr answer not only helped me but many others who might be wondering the same thing I love all yr jewelry you do such a fine job ❤
@valeriew4833
7 ай бұрын
You can use floral foam to hold the cabs while you solder them!!
@karensintuitivejewelry
7 ай бұрын
Thx! I just saw a video about that green foam but it has to be the Wet kind which was a little more expensive so I’ll have to wait in that! I appreciate your feedback & support! 🙏😊💖
@ThePose78
Ай бұрын
Hello. What color patina did you use for these pieces. Very nice 😊
@karensintuitivejewelry
Ай бұрын
@@ThePose78 thx very much! Novacan Black patina
@ThePose78
Ай бұрын
@@karensintuitivejewelry ah ok. You just lightly did it. I wondered that. Thx!
@marcoo.d.798
5 ай бұрын
Hello, I am new to this art and I wanted to ask you for some recommendations on how to seal my pieces, so that the tin is not in direct contact with the skin (it irritated my skin a little hehe) thnx for your videos
@karensintuitivejewelry
5 ай бұрын
There are several different products used for sealing of pieces but all are considered temporary & will need to be reapplied from time to time. The sealants themselves could also be an irritant to your skin so there’s that to consider as well! I would recommend not having the particular piece touch your skin by wearing it over your shirt or blouse ensuring there’s no skin contact! Thx for your interest & support!
@marcoo.d.798
5 ай бұрын
@@karensintuitivejewelry thnk you so much
@susanboggs1612
7 ай бұрын
Hi Karen, I just love your pumpkins, I've been watching alot of your videos. I make cabachons and have accumulated many. Do you have an email I can contact you at? I wanted to run some ideas by you, and get your thoughts. Thank you.
@karensintuitivejewelry
7 ай бұрын
Thx so much. That’s awesome that you have lapidary skills! I appreciate your interest & support! The best way to contact me is through Instant Messenger. Are you on Facebook or Instagram?
@adelegearey8325
11 ай бұрын
Hi! Just have one problem... What solder do you use? I'm looking for a lead free solder for jewelry but I can only find electrical solder. Is this the same? It seems to have a higher melting point. I'm in Ireland. Thank you!
@karensintuitivejewelry
11 ай бұрын
Here’s a link to a company in Ireland I believe that you can purchase through Amazon as well! It’s not electrical solder but considered what is used in stain glass, plumbing, crafts, etc. Essmetuin Lead Free Solder Wire(Sn99.3Cu0.7) For Plumbing Solder/Stained Glass/Crafts/Jewelry 217℃ Melting Point 2.0MM No Flux,ROHS (3.2oz) a.co/d/ayY3CKL Also if you’re on Facebook you might want to consider joining the group called Tiffany Method Soft Solder Jewelry Group…it’s free & they’re members from around the world that can answer specific questions from your country! I hope this helps!
@DebHerzog-mp3jk
11 ай бұрын
Did you create the tendrils from the wires that you soldered along the front of the pumpkin?
@karensintuitivejewelry
11 ай бұрын
Yes! I talk about it at about the 27 minute mark! Have you watched the tutorial yet?
@DebHerzog-mp3jk
11 ай бұрын
@@karensintuitivejewelry yes!! I must have missed it ☹️
@karensintuitivejewelry
11 ай бұрын
😂😂😂
@navasan..
6 ай бұрын
I realized there’s barely any smoke… how’s that possible? Mine is like a chimney
@karensintuitivejewelry
6 ай бұрын
Are you using paste flux? What temperature are you working at?
@navasan..
6 ай бұрын
@@karensintuitivejewelry yes paste flux. Honestly idk today was my first time trying. I used a cheap kit for $15 that I got on Amazon
@karensintuitivejewelry
6 ай бұрын
@@navasan.. I don’t like the paste for that reason & only use the Novacan liquid flux now. If you haven’t watched this video check it out. kzitem.info/news/bejne/w4SovqNucH91aHosi=NKv_9bgG1jcGGDfX
Пікірлер: 73