I’m appalled that they use what appears to be wire nuts for their outside wiring. They should be using heat shrink butt connectors to prevent corrosion, but what do I know I’m just a dumb diesel mechanic.
@RamblinRoadies
5 ай бұрын
I have the Furrion system, and I have not had the lag you describe, but it does occasionally drop signal, and the resolution is horrible. The vehicles are just blobs on the monitor. Their true value is about $150,not the inflated price they sell for.
@Jonesin2Go
5 ай бұрын
You would expect that as long as furrion has been around,they would have improved by now. They don't seem to be interested in doing so.
@Built05STI
4 ай бұрын
I will never recommend furrion cameras in there current state. Video quality is trash.
@Jonesin2Go
4 ай бұрын
100% agree. Seems furrion in general, regardless of the product is poor quality.
@keitholson6849
5 ай бұрын
Good video, my Furrion drops signal periodically too. Not real impressed with the Furrion. I've only used the back view so that I can take a peak at the bikes back there.
@tom73055
3 күн бұрын
Can you use your older cameras with the halo?
@Jonesin2Go
2 күн бұрын
I used my cameras from my bt6. It just depends on how old they are. The cameras from the bt6 and bt7 touch will work
@vinniedellasperanza8230
5 ай бұрын
Really excellent review of the features of this system. You've convinced me to consider the side cameras.
@Jonesin2Go
5 ай бұрын
They do come in handy when needed.
@SpknTC13
Ай бұрын
Thanks for the great review! My Furrion keeps cutting out no signal and my rig is only 24 ft since it's a truck camper. I'll be getting the Haloview instead. Much appreciated!! Cheers! ~M
@raymondschlegelmilch5461
Ай бұрын
After having a Furrion camera on previous trailer, I was less than thrilled; so I went with the BT7 when we traded in the trailer. I like the BT7 a lot, and the better resolution is great; but I do see a slight lag with the side view cameras, so it's imperative to remain aware and check mirrors when looking at the sides. My rear view camera is adjusted down to particularly help with backing up and parking the trailer, and that unfortunately means extremely limited road view; so I plan on installing a second rear camera adjusted up for better traffic view. I bought a Haloview elastic mount to attach the monitor to the vehicle's rear view mirror; the only problem with that is clearance between monitor and vehicle ceiling. Haloview helped me with antennas that mount closer to the body of the monitor, giving a little bit better clearance. My Winnebago Micro Minnie had a solar power connector right where I needed to install one of the side view cameras! I found a plumbing part that worked to fill the connector hole so I could re-mount the solar fitting and have clearance for the camera.
@makeupyourmindinator
Ай бұрын
I would have to get a 4th camera for the front of the truck to use as a dash cam.
@Jonesin2Go
Ай бұрын
@makeupyourmindinator hailoview does make a model with a dash camera and backup camera. It is the bt12, I think. You can use the link here in the description to see all of the different models
@makeupyourmindinator
Ай бұрын
@@Jonesin2Go thanks for the info, I will definitely check them out.
@douglaswoeckener1904
2 ай бұрын
In a previous video you talked about the 'trigger" function needing extra work, I think that video was several years old...... On your new system has the issue with having the side cameras active with the directionals been resolved?
@Jonesin2Go
2 ай бұрын
@douglaswoeckener1904 the new system that I am using now does not have that feature.
@tmtex
3 ай бұрын
I have a 30 ft TT with Furrion. I have no issues with it. Does what it needs to do. I basically use it to make sure the totes I have dont fall off and " sometimes" for backing in. I also have mine hooked up to the upfitter switch ( Ford)
@Jonesin2Go
3 ай бұрын
Hooked to the upfitter switch that is interesting and a good idea. So how did you run that? Just to the camera or throught the running lights?
@tmtex
3 ай бұрын
@@Jonesin2Go The camera. Camera runs to the upfitter switch wires in the engine bay. My 250 is a 22 and they are on the passenger side. You have to turn the driving lights on even though they are auto.
@tonystaut3743
5 ай бұрын
In one of your previous Haloview videos you mentioned you had a U.S. contact for Haloview. I can't find any.
@Jonesin2Go
5 ай бұрын
I reached out to him a while back, but didn't get a response. I will be checking on this.
@tonystaut3743
5 ай бұрын
@@Jonesin2Go awesome. Thank you!
@tonystaut3743
5 ай бұрын
@@Jonesin2Go any idea how one could get a hold of just the new touch monitor? I already have all four 1080p cameras. I really don't need anymore.
@Jonesin2Go
5 ай бұрын
@tonystaut3743 here is a link to purchase just the monitor. www.haloview.com/single-touch-screen-monitor-for-byte-tango-1080p-series-camera.html You can use our discount code. Jonesin2Go and get an additional 5% off
@RV_twidlr
5 ай бұрын
I have had Haloview for years and have been really impressed up until now. I installed the entire system with RV rear camera, two side cameras and a camera in the truck to align my pin while hooking up. Recent changes to Haloview has really upset me. Their new system is NOT friendly to their previous system. Cameras are different, cable from the rear camera to the wireless repeater is different, display is different. In other words "I would have to install an entirely new system (at new system cost) AND... pull a new wire from the rear camera to the repeater module which was practically impossible to do the first time. They needed to upgrade their system so it was backward compatible so the cost and wiring that would make a person with a generation 1 system could reasonably upgrade to a generation 2 system.
Пікірлер: 26