You exhibit a talent for bringing your viewers right into the video. Thank you
@cheaneysaddles
6 жыл бұрын
Thank You so much for your comment.
@digschopper9321
3 жыл бұрын
Home made stamps...I'm in.
@tonylear2705
2 жыл бұрын
Thanks for the lesson Bruce.
@cheaneysaddles
2 жыл бұрын
You are very welcome! Thanks
@wesleylambert9083
5 жыл бұрын
Bruce if a young man worked for you for free for a year he would have made more than any year for the rest of his life I'm sure just to gain your knowledge would be priceless best I ever saw thanks for sharing
@cheaneysaddles
5 жыл бұрын
Thank you for watching and your comment.
@kenporter5022
3 жыл бұрын
I made my own today! Thanks for encouraging all of us to do better. AND save money!
@cheaneysaddles
3 жыл бұрын
You are so welcome!
@jcknives4162
6 жыл бұрын
I’m a budding leather crafter (making holsters for my knives for 30 years). Your videos are great help. Since I make knives I also enjoy building tools... this was a double good video. Thank you!!!
@cheaneysaddles
6 жыл бұрын
Thanks for taking your time to watch and comment.
@frankfomkin222
8 жыл бұрын
Holy smoke, the magic curtain has been pulled back,,,,,,,,, so THATS how it's done! Thank you for the lesson, please keep them coming.
@cheaneysaddles
8 жыл бұрын
+Frank Fomkin Thanks for watching...Bruce
@alanperry7520
8 жыл бұрын
thanks for sharing the nolige people as talented as you don't often share the nolige
@juliangonzales2916
Жыл бұрын
Saludos muy buen trabajo👍👍👍
@cheaneysaddles
Жыл бұрын
Thanks!
@captainchaos3053
8 жыл бұрын
great work, it's nice to see a true craftsman at work
@cheaneysaddles
8 жыл бұрын
Thank You
@Playgun10
8 жыл бұрын
Very impressive! There seems to be no end to your talent!
@cheaneysaddles
8 жыл бұрын
+Playgun10 Thank You Very Much...
@jonessaddle
8 жыл бұрын
Awesome Bruce. Those are some of my favorite boarders. Thanks for sharing
@cheaneysaddles
8 жыл бұрын
+jonessaddle Thanks for watching!
@bubba7531
6 жыл бұрын
Thanks for the inspiration Bruce!
@cheaneysaddles
6 жыл бұрын
Thanks for watching my KZitem videos!
@michaelarmbruster586
Жыл бұрын
Thank you
@cheaneysaddles
Жыл бұрын
You're welcome
@robertweber6406
6 жыл бұрын
Thanks for the confidence to make stamping (and maybe carving) tools. I have hot rolled square stock that will be serpentine stamps tomorrow
@mikesibert1723
8 жыл бұрын
Looking good as always Bruce. I have done this pattern on a few sheaths and other items. It is one of my favorites since I first saw you demonstrate it.
@dlcknives_and_leather
8 жыл бұрын
that is awsome i made some stams myself a wile back i was supriced on how well they work
@aaronm8694
7 жыл бұрын
Thank you so much for this. I've been thinking about custom making my own stamps for some Polynesian patterns. We (Rotumans) dont have much in the way of historic craft with animal hides, but we sure do have some fantastic tattoo and weaving patterns that will translate to leather extremely well, Im sure. I was just planning a spot in the shed for my bench grinder stand not a few hours ago. Must be a sign! Thanks for sharing mate.
@digschopper9321
3 жыл бұрын
I'd like to see what you've done!
@osprey02
8 жыл бұрын
Well done,Thanks for sharing ~~~~~
@ericp726
8 жыл бұрын
Great video Bruce.
@cheaneysaddles
8 жыл бұрын
+ericp726 Thank You.
@KeithPeters
8 жыл бұрын
Those are great. I'd love to see a video on how to make these tools.
@ericf.wolcott4716
6 жыл бұрын
Those are great tools. I think I have some square stock in the garage. :)
@alfredomendivil9711
6 жыл бұрын
Great video Great Channel, thank you!!!
@vojtechfischer4633
7 жыл бұрын
Velmi pěkné video pro začátečníky a návod jak si udělat svoje originální raznice. Děkuji pane za ochotu podělit se o své mistrovství jste opravdový mistr s velkým M. Přeji Vám hodně úspěchů ve Vaši tvořivé práci.
@Blues-man.
8 жыл бұрын
very nice, I really like those designs !
@cheaneysaddles
8 жыл бұрын
+irish ways Thank You...
@edwarnock4534
8 жыл бұрын
I have considered doing the same thing, but while I was considering, you got to work and did it and it worked great! Great job! I think I will try to make a set of bar grounders then maybe get out the graver max and try making some steep angle bevelers, first smooth and then checkered. By the way that Berry King swivel knife is fantastic. I'd been using that Tandy knife so long I have had to retrain myself.
@cheaneysaddles
8 жыл бұрын
+Ed Warnock Ed, I think checkering with the Graver Max will work great...Thanks for your comment... Bruce
@wileydog420
8 жыл бұрын
I like it! Good job Bruce. Thanks for the demo. So can I put in an order for a set of those?
@jake210c
8 жыл бұрын
great video, maybe do a video on tool making?
@kentison9143
5 жыл бұрын
I really like this design. Can you tell me what the amount of spacing between the lines are? Or what the spacing should be.
@zinaslifemore
6 жыл бұрын
Nice work
@johnclark802
6 жыл бұрын
Sewing machines
@pacoruiz1085
6 жыл бұрын
Yo me hago los troqueles con acero corrugado de obra son muy faciles de conseguir y se obtienen unos resultados excelentes
@stuartmarkman769
4 жыл бұрын
I think some manufacturer copied your design. These are available at Tandy leather. I believe the number is 444 and 445
@ninesticks
8 жыл бұрын
wow...i modified a crafttool as was described in a previous video and it is really neat - BC sell me a set of these please!
@jacobperry580
8 жыл бұрын
hi Bruce love your videos. where do you buy your leather from ?
@cheaneysaddles
8 жыл бұрын
+jacob perry Tandy Leather is a good source call and see if you can get a catalog that will be very helpful to you. www.tandyleather.com
@moncorp1
5 жыл бұрын
Think Bruce has done some leatherwork in his time? Look at that maul.
@professorgryphonsmuseumofb5380
2 жыл бұрын
Need camera closer to really see!!
@walkercopeland7341
8 жыл бұрын
Would you sell the second one?
@vicwojcik9125
5 жыл бұрын
How do You know how far apart to make Your lines ? Trial and error ?
@cheaneysaddles
5 жыл бұрын
Yes on a piece of scrap leather.
@vicwojcik9125
5 жыл бұрын
Bruce Cheaney Thanks.
@amberwilkins3067
6 жыл бұрын
Can you make a video showing how to make a leather stamps
@cheaneysaddles
6 жыл бұрын
I will see what I can come up with.
@viridian4388
4 жыл бұрын
It's better at 1.75 speed, just saying.
@str8tfaded119
8 жыл бұрын
could you do this on vinyl
@cheaneysaddles
8 жыл бұрын
+str8tfaded The tool will cut the material...
@str8tfaded119
8 жыл бұрын
ok thank you for your response. Do you know of any tools I can use to stamp on vinyl?
@wesleylambert9083
5 жыл бұрын
If I lived closer to you I would ask if I could work a couple days per week for free just to gain the knowledge and I'm 58 years old
Пікірлер: 69