So service mode doesn’t trigger airbag and no need to power down the car? 😮
@ixidorstrinity
9 ай бұрын
Highly recommend tightening it to spec of 59 ft-Ibs with torque wrench
@frank118
Жыл бұрын
Best install video on the internet.
@BCTeslaGuy
Жыл бұрын
thanks
@speedypm
4 ай бұрын
Any chance you can put the exact measurements (WxLxH) of the old, replica, and real model S/X yokes? This would be super helpful.
@bomb1st
11 ай бұрын
the install video on hanshow's site shows how to install the module box without taking apart the new yoke.
@rumenbarzakov7947
8 ай бұрын
Hi. Really informative video, congrats! I have a question - How you ensure that placing the new wheel is centered so the car wouldn't go left or right while keeping wheel centered?
@BCTeslaGuy
8 ай бұрын
there is a slot (key) so it can only fit one way. thanks for watching
@universeisundernoobligatio3283
Жыл бұрын
Great review and instal of the yoke. Did a demo drive of a S with the yoke, really liked it, no issues, was used to it after a minute. Too bad this one does not have turn signal buttons on it, they were easy to use, don't see why some make a big deal of them.
@PierCustomCoinsDesigns
4 ай бұрын
Where did the screwdriver come from? What’s the name of that style tip?
@BCTeslaGuy
4 ай бұрын
If you are talking about the small screwdriver with a groove, all I did was filed a groove to help with moving the wire clip. thanks for watching.
@MarkStatkus
Жыл бұрын
Thanks for the more detailed install with that control module. Something to chew on as it looks a bit more involved than I expected.
@BCTeslaGuy
Жыл бұрын
It wasn't that difficult, just time-consuming. Worth the effort. Thanks for watching.
@GarRnZeM
Жыл бұрын
@@BCTeslaGuyI just installed without swapping any internals and now the scroll does not work. Do you think I need the control box? The yoke did not come with one.
@BCTeslaGuy
Жыл бұрын
Ya the same thing happened to me when I installed it prior to making the video. You will need take the control box out of your original steering wheel. thanks for watching
@GarRnZeM
Жыл бұрын
@@BCTeslaGuy thanks for being honest. Other influencers don’t mention moving parts, saying it’s plug and play. Going move the box like you did. Hope it goes well.
@GarRnZeM
Жыл бұрын
Thanks to your video, i moved the control box. Everything works as it should. Took me less than 30 minutes. Wish I had seen your video earlier. Thanks again for the great video.
@marcoalexander7244
9 ай бұрын
Thank you for the detailed install. Were you able to get the heat to it. I noticed that I would pre condition the car but my steering wheel doesn’t seem warmer
@BCTeslaGuy
9 ай бұрын
Yes I did. What year is your car?
@vancity2349
Жыл бұрын
Nice install...
@BCTeslaGuy
Жыл бұрын
Thanks 👍
@Bryan.Nguyen
Жыл бұрын
Do you have the counterweight for FSD? Just wondering if my counterweight using on the original steering wheel will fit on this new yoke wheel or not.
@BCTeslaGuy
Жыл бұрын
don't use them.
@Bryan.Nguyen
Жыл бұрын
May I ask you 2 questions? 1. What is the cluster display screen is that? Can I have link to buy it? 2. You show us how to put your car in service mode, can you show us how to disable, out of service mode after finished installing the yoke wheel. Thanks
@BCTeslaGuy
Жыл бұрын
Here's the video for the mini display install. I have v3 and will be releasing a video very soon. Same as v2 with a touchscreen that allows you to fold mirrors and open glovebox. Exiting Service Mode is very simple, click exit button on screen. kzitem.info/news/bejne/lHeC14GdnIapnn4
@Bryan.Nguyen
Жыл бұрын
Thank you @@BCTeslaGuy
@JoeWolfe88
Жыл бұрын
I was really hoping to see a side by side comparison with the old Yoke. Can you tell a difference in size?
@BCTeslaGuy
Жыл бұрын
It's a bit smaller, which makes it easier to get into the car (slide your right leg under it). Driveability is the same.
@speedypm
4 ай бұрын
Any chance you can put the exact measurements (WxLxH) of the old, replica, and real model S/X yokes? This would be super helpful.
@dbar9579
Жыл бұрын
Very cool. What is the quality of the buttons? Are they metal?
@BCTeslaGuy
Жыл бұрын
metal and Tesla OEM. thanks for watching
@vpxtrailers9395
11 ай бұрын
My yoke doesn’t seem to slide on like the original one does. Having a hard time getting it on.
@BCTeslaGuy
11 ай бұрын
if it's not sliding on correctly, try moving the clear plastic parts in before installing the yoke. It may be misaligned.
@barrybena1336
11 ай бұрын
I just installed mine but never transferred the lower control box. Everything seems to work as normal. Concerned?
@BCTeslaGuy
11 ай бұрын
should be fine. It wouldn't work if it didn't have one installed.
@barrybena1336
11 ай бұрын
@@BCTeslaGuy yeah. everything works as expected, so maybe mine came with the control module?
@marcoalexander7244
9 ай бұрын
Lucky 😢 I transferred my controller and still not getting heat to the wheel
@marcoalexander7244
9 ай бұрын
I love it otherwise
@jimmurray3379
6 ай бұрын
It looks like a straight swap on some videos . With no need to swap control box . It seems a but involved in your video . A lot of patience required
@americansoldier7776
Жыл бұрын
How long did it take for them to mail you your new steering wheel? I’ve ordered two major things from them and it’s been over a month with no activity at all. I’m about to file a fraud claim with my bank. Their customer service sucks.
@BCTeslaGuy
Жыл бұрын
Mine showed up within a week buy I did express and arrived via FedEx. I agree customer service has something to be desired. They are located in China and I would try using WhatsApp in the late evening as this seems to be the best time I can reach them.
Пікірлер: 43