Excellent video! Needed to get some general knowledge for help with my job, so thank you.
@duanerussfernando
18 күн бұрын
Great video
@mostefatayebcherif6798
16 күн бұрын
Hi everybody, thanks for this crucial information
@AlishaKhan-vx2ce
2 жыл бұрын
The best video...keep it up ❤❤❤
@rafaelbezerra5041
4 жыл бұрын
Studying airplane mechanics thank you for your upload.
@StratMatt777
2 жыл бұрын
I can tell you that on the 747-400 center wing tank in 1999 we used countersunk WQ Radius Lead-in Bolts to fasten the spars (Front, Mid and Rear) and spanwise beams (1 2 and 3) to the upper and lower surface to create the center wing section. From the rear the layout is: Rear spar, spanwise beam (SWB) #1, mid spar, SWB #2, SWB#3, Front spar. We drilled .311" holes with .013" countersinks and cold worked them before taking the pieces apart with a crane in order to de-burr the holes and apply sealant before putting it back together, then installing fasteners and securing them with washers and nuts using nut drivers from the tool room which were calibrated to the correct torque. I remember using pan head WR fasteners on the back side of the rear spar when filling holes that had been used for attachments that the crane had used to turn the CWT over to move it to another jig in our area. Wow... I might even remember the number... 8-23 maybe?! In 1999 Boeing quit building the CWT from Bombardier parts and started importing it complete from Japan (probably made by whoever was making the 777 CWT). I almost never used lockbolts (maybe only on that 10-23 on the rear spar?), but all the mechanics called them "Swedge fasteners". This video just taught me that they are actually "Swage fasteners"! Oops! :)
@cragbot1
3 ай бұрын
sounds like boeing needs to show this to the people putting on the doors on the 737
@Airman..
17 күн бұрын
You can teach a monkey how to install AN4 aviation spec bolts
@joergwiesmann4261
3 жыл бұрын
....Thank YOU sooo much !!! I learnd sooo much from this very interessting Video !! kind e regards from Swirzerland !!!
@AlMiMoz
3 жыл бұрын
Thanks for uploading the video
@mauriciodelgado1
8 ай бұрын
Buena información, Saludos
@matteocoda6368
Жыл бұрын
Thank you so much!!
@jodange33
3 жыл бұрын
Thank you.
@korayatmaca
2 жыл бұрын
Teşekkürler hocam emeğine sağlık
@DigitalAndInnovation
11 ай бұрын
and the bottle of water facilitates hydration... Some real lazy copy. The shear fasteners resist shear... Wow Sherlock- great revelation
@hamedzarif7711
3 жыл бұрын
Comprehensive
@jovitiuxrs4847
3 жыл бұрын
Thansks a lot
@jovitiuxrs4847
3 жыл бұрын
Another video about to install Hard fasteners .thanks
@blondprince9507
2 жыл бұрын
Hello , really appreciate that , it's more important
@godbwithme7586
4 жыл бұрын
Wow
@lokgatorindustrialfastener7786
3 жыл бұрын
👍🏻
@rz5062
3 жыл бұрын
They don't make videos like this anymore
@BonesJones85
Ай бұрын
God damn right about this
@davidg3944
3 ай бұрын
Thanks, this is a very helpful video! Too bad nobody at Boeing watches it anymore...
Пікірлер: 24