This guy just looked at the whole willie G catalog and said "yes"
@CamaroTime
4 жыл бұрын
That orange looks really good in the light!! Well done Brian
@FABAutomotiveDetailing
4 жыл бұрын
Thank you It turned out great!
@bstewartexecutivecarcare6953
4 жыл бұрын
Having owned several bikes myself over the years I know how time consuming it can be. Your results look great. Anyone would be proud to ride that bagger. Hope you are getting settled into the new house. 👍✌️🇺🇸
@FABAutomotiveDetailing
4 жыл бұрын
B Stewart ExecutiveCarCare I know it was very time consuming! It looked amazing. We are slowly settling in. Thanks brother
@washingtonfootballfanwgil8392
4 жыл бұрын
You did a great job. The owner must be very pleased.
@PapaSmurf918Detail
4 жыл бұрын
Man that thing is super BLINGTASTIC!! Awesome job brother! Really takes time an patience to get into detail mode on these things but the after shot results are really worth it. Looks awesome man. Great video!
@FABAutomotiveDetailing
4 жыл бұрын
PapaSmurf918 It was BLINGTASTIC! I thought it would be an easy breeze right through detail and man was I wrong. Thanks brother
@philgarage2522
2 жыл бұрын
Very impressive I thought it was clean at the beginning.i was wrong it's stunning 👍😃🇬🇧
@IntervalePC
4 жыл бұрын
That bike looks amazing😮🤤😍🥰 Great video editing👌👍 My cat was going nuts when she heard the cricket🦗 She was looking to find it to no end🤣😂
@FABAutomotiveDetailing
4 жыл бұрын
IntervalePC Thank you it was a long edit video but worth it. That’s funny about your cat. Funny thing is when I made the video I didn’t even notice the cricket. 😂 Thanks brother as always for the support.
@jog7940
3 жыл бұрын
Hi brilliant video, I saw in one of the comments that the products used are listed, but I haven't seen them. Thanks
@cjburn2758
4 жыл бұрын
I always thought I would own a motorcycle. After 15 years driving for work, there is absolutely no way I could do it after everything I have seen. Good detail man!
@FABAutomotiveDetailing
4 жыл бұрын
Cjburn 27 Yeah I probably won’t own another one either. It’s just to risky anymore. Thanks man
@Phriendlymd
4 жыл бұрын
Man! What a fantastic job! Seems the smaller the vehicle, the more meticulous you have to be. You did a fantastic job on all that chrome! Nice job FAB!!
@FABAutomotiveDetailing
4 жыл бұрын
Phriendlymd Thanks brother! Yeah I thought I would breeze right through this detail and man was I wrong. 😂
@tonymattisson6158
4 жыл бұрын
Awesome work and video! Shines like a diamond! A small rotary polisher with backing plates down to 1" if you want to have machines to help you out is a great option to go with. Also if you have seen those kits that you attach to a rotary polisher and have a very flexible extension to where you attach foams and wools in various forms. Could be very usefull to get into the nocks and crannies. Beutieful walk around video in the sun!
@FABAutomotiveDetailing
4 жыл бұрын
Tony Mattisson Thank you! I have thought about buying one of those extensions and polisher. I would really like the iBird but can’t justify the price and haven’t heard the greatest things about them. Thanks for watching
@julianmorrison4600
2 жыл бұрын
Tequila sunrise paint. I’ve got a street glide that’s the same color and I’m GLAD I found your video as I’m about to tackle the same task. Beautiful work man!
@FABAutomotiveDetailing
2 жыл бұрын
It’s a beautiful color! Thank you!
@davidwilley6199
2 жыл бұрын
What a great job.
@johnhorton443
4 жыл бұрын
Bike looks amazing. Great job for sure. Well worth the time you spent doing it. I'm sure the customer was amazed at how it looked.
@FABAutomotiveDetailing
4 жыл бұрын
Curb Appeal Lawn Care Indiana Thanks! He absolutely loved it!
@patrickcampbell1621
4 жыл бұрын
Outstanding as always, hope the new house has more garage space for you.
@FABAutomotiveDetailing
4 жыл бұрын
Patrick Campbell Thank you! Definitely a much bigger garage. My old garage was 20’x20’ and the new garage is 24’x30’. Downside is it is unfinished so I have a lot of work to do.
@willboyd7794
3 жыл бұрын
Wow!! I’ve been looking for a video of a motorcycle wash and detailing That beautiful job!!
@FABAutomotiveDetailing
3 жыл бұрын
Thank you!
@myocdautodetailing3488
4 жыл бұрын
😎 all that chrome blinging! Love it! Awesome job brotha!! Flawless outcome!
@FABAutomotiveDetailing
4 жыл бұрын
My OCD Auto Detailing It was almost blinding! Haha Thanks brother I appreciate it
@gregmannos
4 жыл бұрын
I have nearly the same bike. Thanks for the video, looks really good. You said you don't do a lot of bikes but if you run into the pipe bluing again there is a product called Blue Job that works great..
@FABAutomotiveDetailing
4 жыл бұрын
Greg M Well you ha e a beautiful bike then. you are welcome. I have never heard of that for bluing. Thanks for the info
@mhilde7744
3 жыл бұрын
Brian, awesome!
@FABAutomotiveDetailing
3 жыл бұрын
Thank you
@KrispyKarl7
4 жыл бұрын
Great video B! Very impressive results and idk about you but I’m super hyped about the new products coming from Adams and Griots and a bunch of other companies
@FABAutomotiveDetailing
4 жыл бұрын
Jordan Adamowicz Thanks man! I am stoked about all the new products also but there are just to many to try.
@rivirme
4 жыл бұрын
NIce Job, great video. I am glad you listed the products too!
@FABAutomotiveDetailing
4 жыл бұрын
rivirme Thank you!
@chavezcustomdetailing9540
4 жыл бұрын
FAB I will literally watch you detail bathtub all day.😆 Great video brother.🖒
@FABAutomotiveDetailing
4 жыл бұрын
Oh man I literally cleaned our bathtub today and put Seal N Shine on the tiles! 😂 Thanks brother
@edruiz6364
4 жыл бұрын
From a DIY'er point of view, I would consider that a labor of love. 👍
@FABAutomotiveDetailing
4 жыл бұрын
Ed Ruiz Definitely! Thanks brother
@rbljackson
Жыл бұрын
I REALLY need to do that type of cleaning on my 02VTX1800. Ive never messed with the Ceramic coatings, but they seem to be the movement over carnuba wax now.
@FABAutomotiveDetailing
Жыл бұрын
Yes ceramic coatings are the way to go.
@matthewsavidge6248
4 жыл бұрын
Great vlog Brian, amazing how the head down drivers is global I don’t even enjoy car driving now since being rear ended by an idiot on his phone and now all the time you see people in the rear view head down, it’s horrible ! 😡
@FABAutomotiveDetailing
4 жыл бұрын
Matthew Savidge Thank you! Yeah it is dangerous on the roads now. I see people run red lights all the time while looking at their phones.
@cavtj1
3 жыл бұрын
Tequila Sunrise and Harley Orange. I have a Street Glide in the same colors.
@billbermudez5974
3 жыл бұрын
good job.
@FABAutomotiveDetailing
3 жыл бұрын
Thank you!
@UKSportsFan
4 жыл бұрын
Hey Brian, your experience with motorcycles and your thoughts on other motorists mirrors mine 100%. I had an identical situation where a lady at an intersection pulled out into me right as I was riding through. I ended up with 3 broken ribs as a result (thank God I was wearing my helmet!) I rode for a few years afterward but, like you, it got to where I was a little paranoid and fearful of dumbass drivers. Take care, bro.
@FABAutomotiveDetailing
4 жыл бұрын
UKSportsFan Its just not worth it to me anymore! To many people paying attention to their phones. Glad it wasn’t any worse for you.
@miguelhottois1176
3 жыл бұрын
I mostly do car details as well, so I’m really bad at estimating for motorcycles, how much would you typically charge for a job like this? Great content by the way, really enjoyed the vid!
@MNpicker
4 жыл бұрын
😯 That is very nice!! It looks amazing 😎
@FABAutomotiveDetailing
4 жыл бұрын
MNpicker Thanks bro!
@cecet5534
4 жыл бұрын
Great content, very informative. 👍🏾
@FABAutomotiveDetailing
4 жыл бұрын
Cece T Thank you!
@bobbymorgret
4 жыл бұрын
But you did a sick job! That thing almost burned the retinas in my eyes lol.
@FABAutomotiveDetailing
4 жыл бұрын
bobbymorgret Thanks man! The best kind of eye burn. 😂
@bamacfa3130102
3 жыл бұрын
Is there anything you can do for the blueing of the exhaust Great job
@FABAutomotiveDetailing
3 жыл бұрын
Unfortunately not! Thanks
@jdisdetermined
4 жыл бұрын
Thanks! This was a good watch, don't see a lot of motorcycle content.. 👍👌✌ I dont know about anyone else, but *every single time* I'm looking at a motorcycle job my brain tells me "hey look bro, it's little, this will go quicker and easier than normal vehicles.." Then my OCD kicks into overdrive and I'm unbolting and removing pieces and making custom tools and pads to get into those tiny and hidden spots and sinking in twice the amount of hours.. 😕😧
@FABAutomotiveDetailing
4 жыл бұрын
Keith Olsen Thank you! I would like to do more motorcycle content. Man you are right about that. I thought this would be a breeze and man did I under estimate it. Thanks for watching.
@texasbeachbum
4 жыл бұрын
I've never detailed a bike before. I have owned only one bike but on two wheels I'm dangerous so I decided to stick to just four wheels.. That orange pops now
@FABAutomotiveDetailing
4 жыл бұрын
ZoutlawSS You would think they are easier and faster then cars but they definitely aren’t. I will stick to four wheels now also. Thanks man
@Steve-qn8gn
3 жыл бұрын
I know this is a couple years ago but.... Why would you leave the saddle bags on the bike to not only clean the rear wheel but also wash the bike and then take them off to polish them?
@FABAutomotiveDetailing
3 жыл бұрын
It’s easier to wash the bags with them attached so I do t risk knocking them over if I put them on the ground while washing. I took them off so I could get to the back side of them to polish and coat.
@danmorrissette4814
4 жыл бұрын
You did Awesome!!
@FABAutomotiveDetailing
4 жыл бұрын
Dan Morrissette Thank you!
@robertopinna5065
2 жыл бұрын
hello I wanted to know if the polisher is better with battery or with the wire to be connected to the network? With the vivid color black I think it's more difficult, am I wrong? Greetings from Italy.
@FABAutomotiveDetailing
2 жыл бұрын
Cordless or wired doesn’t matter. It just needs to be able to spin the pad fast enough for correction.
@greggriffin3242
3 жыл бұрын
What did u use to clean the cluster area
@dpd1035
3 жыл бұрын
Fantastic job!! Looks amazing. I need those rims, which ones are they?
@FABAutomotiveDetailing
3 жыл бұрын
Thank you! I don’t know what wheels they are as it isn’t my bike.
@hoofhearted4097
4 жыл бұрын
One of the last videos at the old house. Do What You Do FAB. HOOF OUT
@FABAutomotiveDetailing
4 жыл бұрын
HOOF HEARTED Yep but I have a special Thanksgiving Turkey video coming out soon from the old house. It has a special guest appearance in it. 😂
@greggriffin3242
Жыл бұрын
Bike looks amazing!!!What do you charge for that service
@FABAutomotiveDetailing
Жыл бұрын
Thank you! Not much as I do it as a side hustle.
@koioo2
4 жыл бұрын
looks beautiful
@koioo2
4 жыл бұрын
8i did enjoy it yes i do
@FABAutomotiveDetailing
4 жыл бұрын
alberto gorin Thank you!
@greggriffin3242
3 жыл бұрын
Like this one
@nottabidenfan660
3 жыл бұрын
I'm lil sketchy about using a polisher, since I'm a "beginner" and my bike is black. I don't want those Buff marks, that I see in other beginners cars.. Any advise? BTW...Looks awesome!
@FABAutomotiveDetailing
3 жыл бұрын
Buffing trails typically come from a rotary polisher or a heavy compound with an aggressive pad. Today’s DA polishers are very safe and I would not be concerned at all. Take your time and it will be ok. Always start least aggressive then work your way up from there to get the correction you are looking for. Thanks and love the name! 🇺🇸
@nottabidenfan660
3 жыл бұрын
@@FABAutomotiveDetailing Thanks for the reply/encouragement! I will give it shot. "Practice makes perfect!" Be well, bud...shine on! 🇺🇲
@chicagomike2111
4 жыл бұрын
I feel your pain FAB.. my 2009 Fatboy has even more chrome and Black Ice/ Blue Ice paint... royal PIA to detail..
@FABAutomotiveDetailing
4 жыл бұрын
Chicago Mike Yeah if it was maintained it would be easier but you know how that goes sometimes.
@chicagomike2111
4 жыл бұрын
@@FABAutomotiveDetailing Sure do FAB... Hope your move is going well and you get settled and back to normal quickly.. Another thing I can feel your pain on.. Moving and renovating...UGH!
@willkearney5002
4 жыл бұрын
Absolutely incredible detail. Where are you located & how much is a detail like tht?
@FABAutomotiveDetailing
4 жыл бұрын
Will Kearney Thank you! I live just east of Indianapolis. Normally $200-$300
@costantinofrancescobaffa7730
3 жыл бұрын
PULISCI LA MOTO MEGLIO DI ME CHE NON SONO DA POCO, COMPLIMENTI
@bobbymorgret
4 жыл бұрын
I think I'd rather wash a dump truck than detail a motorcycle! Lol.
@FABAutomotiveDetailing
4 жыл бұрын
bobbymorgret Well it would be bigger panels! 😂
@bobbymorgret
4 жыл бұрын
@@FABAutomotiveDetailing 😂😂😂
@falconator3419
3 жыл бұрын
What do you think about the Maxima SC1 high gloss coating? I’ve used it on my Harley before and I think it works great.
@FABAutomotiveDetailing
3 жыл бұрын
I have never used that coating. Sorry
@jmmustangs3078
4 жыл бұрын
Top 3
@FABAutomotiveDetailing
4 жыл бұрын
JM Mustangs 👍🏼
@kavii818
3 жыл бұрын
How long was the total job ? . Very nice .
@FABAutomotiveDetailing
3 жыл бұрын
Probably 6-8 hours.
@xaviermcdetailing2835
2 жыл бұрын
So what did you charge
@willkearney5002
4 жыл бұрын
Hello friend, i truly enjoy ur work & vids. I would be in the North Carolina area Sept 7th-12. How can I reach you so I can set up a detailing?
@FABAutomotiveDetailing
4 жыл бұрын
Will Kearney Thank you! I’m not in North Carolina I’m in Indiana.
@kiabass8798
4 жыл бұрын
Hey fab automotive detailing i need some ceramic coating i was on meds for my autism can we bring some detailing companys to gather
@FABAutomotiveDetailing
4 жыл бұрын
kia bass 879 I’m not sure how to answer your comment!
@LonesomeNomad137
4 жыл бұрын
Oh shit, that beautiful bike has a f🤐🤬king trailer hitch.
@jasonb6478
4 жыл бұрын
Not sure I would enjoy doing a Harley. Looks good though, My old neighbor built a bench he could drive his bike up on after this I can see the true genius behind it. After this vid you may end up picking up some more bike action and may need to get a lift or build a bench yourself. Nice work again though. I got a griots 3inch you can have, used once and hated it so bad when I finally got my Bigfoot I pulled the backing plate off of my little torq and swapped it with the griots polisher.
@FABAutomotiveDetailing
4 жыл бұрын
Jason B It definitely took longer then I thought it would. I wouldn’t mind picking up more bikes. My wife bought me a new 3 inch swirl killer but I appreciate the offer. Plus Griot’s just unveiled a new 3 inch it looks awesome. They went from a 200 watt motor to a 700 watt
@jasonb6478
4 жыл бұрын
FAB as far as griots goes I am done with polishers from them. If things ever get serious for me I will probably stick with rupes. I may sound like a fan boy but a couple bad experiences with cheaper ones will do that. If you pick up more bikes you could almost justify the rupes nano.
@FABAutomotiveDetailing
4 жыл бұрын
Jason B Hey man use what works for you there is nothing wrong with that and doesn’t sound like a fanboy. One of these days I will definitely get the iBrird Nano.
@mth2068
3 жыл бұрын
What do you use on the black plastic parts?
@FABAutomotiveDetailing
3 жыл бұрын
The spray coating works great on plastics also.
@greggriffin3242
3 жыл бұрын
Awesome job!!!What do u charge for a detail Lol or that
@FABAutomotiveDetailing
3 жыл бұрын
Thanks! It all depends on what the customer wants. Motorcycles can got from $200-$500
@billthomas9328
3 жыл бұрын
Bike looks great. However , if you had let the neverdull dry to a haze before removing it. You would have achieved the same results minus 2 steps
@FABAutomotiveDetailing
3 жыл бұрын
Thank you!
@Speedy2246
3 жыл бұрын
What buffer did you use?
@crazy.raysvideos5466
4 жыл бұрын
If you knew how much I would love to have that cleaner you would send me some
@GregLamar-x1z
Ай бұрын
What did you charge for this ?
@FABAutomotiveDetailing
Ай бұрын
@@GregLamar-x1z I honestly don’t remember this was several years ago and he is a friend. So probably not as much as I should have. 😂
@D-Squared
Жыл бұрын
The other side is not blueing because it’s a dummy pipe
@FABAutomotiveDetailing
Жыл бұрын
The other pipe is not a dummy pipe as it has exhaust come out of it. The right side just has more of the exhaust flow
@thefast.trucker5124
4 жыл бұрын
🔥🔥🔥🔥🔥
@FABAutomotiveDetailing
4 жыл бұрын
THE FAST.TRUCKER Thank you!
@PapaSmurf918Detail
4 жыл бұрын
Dam!! 2nd!!!!
@FABAutomotiveDetailing
4 жыл бұрын
PapaSmurf918 Well well! 😂
@PapaSmurf918Detail
4 жыл бұрын
@@FABAutomotiveDetailing 🤣😭
@jaykid007
4 жыл бұрын
First!
@PapaSmurf918Detail
4 жыл бұрын
😭🤣🤣🤣 jason ftw.
@jaykid007
4 жыл бұрын
PapaSmurf918 😂
@chrisglover7080
3 жыл бұрын
Way to much chrome
@FABAutomotiveDetailing
3 жыл бұрын
Yeah I’m not big on a lot of chrome either!
@5threecustomsllc
Жыл бұрын
Excellent work! It takes alot of time and patience to do this right.
@FABAutomotiveDetailing
Жыл бұрын
Thank you and yes it does!
@RajaKurcaci
3 жыл бұрын
Still swirl
@jaykid007
4 жыл бұрын
That thing turned out amazing. That is a hell of a lot of chrome. Tnx for the vid!
@FABAutomotiveDetailing
4 жыл бұрын
Jason Davis Thanks! Way to much chrome to clean. 😂 It’s a 2013
@patrickobrien.2028
2 жыл бұрын
Beautiful job man. Incredible finish.
@FABAutomotiveDetailing
2 жыл бұрын
Thank you!
@OuzoLouGarage
4 жыл бұрын
Harley Davidson came out great ..
@FABAutomotiveDetailing
4 жыл бұрын
Ouzo Lou Garage Thanks Steve!
@tomz1220
4 жыл бұрын
Funny 2005 was when I smashed up my bike as well. Love the transformation of that beautiful bike 👍
@FABAutomotiveDetailing
4 жыл бұрын
Tom Z Hopefully you weren’t hurt to bad. Thanks man
@tomz1220
4 жыл бұрын
@@FABAutomotiveDetailing aaaahhhh only a broken femur, and fractured pelvis, nothing too bad 🤘
@FABAutomotiveDetailing
4 жыл бұрын
Tom Z You definitely made out worse than I did. I had a concussion and some road rash that’s all. Glad to hear you’re OK
Пікірлер: 143