One of the coolest looking bikes ever made. Bought a '23 LRS. S&S cam and valve gear come next. Dealer wanted $2K US for mild SE cam install. Will wait for S&S just for the magnificent idle. S&S has been around for over 50 years. They know their stuff. Enjoy the beast.
@LonerBoi88883
Жыл бұрын
same bike, same exhaust, same intake, same cam, different tuner (powervision). Rode across country to my relatives house and back around 5000 miles or 8000 km. Sound is very nice and gas mileage was not too bad.
@mattoo6389
Жыл бұрын
Thanks bro, that is one hell of a cross country ride, I follow your channel. It does sound good with that setup, I think I do need to invest in some earplugs, I find after a few 100 klms it gets a bit much.
@nystar01
5 ай бұрын
Your bike was an inspiration to mine mate. I bought mine over 2 years ago and have gone a slightly different route, but every time I go back to your bike, it reminds me this was another reason why I got the LRS haha.
@mattoo6389
5 ай бұрын
Thats awesome bro, I'll check your bike out, im still enjoying mine 4 years later, LRS great bikes
@canttalk
Жыл бұрын
I have same motor, same exhaust, different air filter, different tuner. On a 2019 breakout m8 114 after dyno tuned I'm right at 130 torque and 116 hp. I have the powervison tuner and target tune. I'm in Texas so it's interesting the difference in the numbers between your bike and my bike.
@mattoo6389
Жыл бұрын
130 is great torque, yes I see many different numbers with similar set ups, I guess there's many different factors to it.
@canttalk
Жыл бұрын
@Mattoo yes sir. It's crazy how one gets hp out the cam and the other gets torque out the same cam. Mine is actually 129.51 torque and 115.76 hp but I just round it up.
@kennyhall2444
Жыл бұрын
Beautiful bike. Keep posting more on the bike
@mattoo6389
Жыл бұрын
Thanks bro, I have a cpl more videos planned
@heavy_proton
Жыл бұрын
Sounds and looks beautiful!
@mattoo6389
Жыл бұрын
Thanks bro
@juanvalles8968
4 ай бұрын
What about the fuel consumption is it increase with the cam ?
@jasongallagher7646
Жыл бұрын
Sounds sweet Bro! I'm strongly considering the 475.
@mattoo6389
Жыл бұрын
They do sound mean.
@GeorgeHayabusa23
Жыл бұрын
Beast!!
@EddieUltimateChampion
Жыл бұрын
Great video! 💪🏽 If you don’t mind me asking, how much did it cost to install 475 cam? Trying to get an avg ball park. Ty!
@mattoo6389
Жыл бұрын
I dont have the paperwork in front of me but I think I paid $2200 Australian dollars for the cam installation and dyno tuning.
@crescentmoon610
Жыл бұрын
@@mattoo6389 bike sounds good. Is the $2200 including the parts or is it just for labor and tune? Thanks
@mattoo6389
Жыл бұрын
@@crescentmoon610 that's including parts
@baileewalker7232
Жыл бұрын
looking good mattoo
@mattoo6389
Жыл бұрын
Thanks Bailee 🤘🏻
@Jeppm
Жыл бұрын
That sounds good!!!
@war6431
Жыл бұрын
Badass bike!
@mattoo6389
Жыл бұрын
Thanks bro
@rodenheap68
Жыл бұрын
Hey buddy, nice bike. I have the 117 also with S&S 475 cam with extreme ventilator intake and D&D Bobcat, tuned on the same dyno!. 133/140. Thing absolutely rips but I get a lot of exhaust crackle and spitting on decel at low rpm, do you experience this? Cheers
@mattoo6389
Жыл бұрын
Hi mate, I dont get any spitting or crackle on decel, the only side effect that I have is it needs a little higher rpm in stop start traffic situations. It seems to not like low rpms in those situations
@rodenheap68
Жыл бұрын
@@mattoo6389 yes stop start or slow traffic is a pain but on the open road it's a weapon. I might talk to them again about this crackling I get on the decel. Might see ya around, cheers
@allan9584able
11 ай бұрын
you just have to ride clutch more in traffic , keep it smooth @@rodenheap68
@garyrosenquist4071
Жыл бұрын
I agree, fuck the warranty and I won't let Harley touch my bike. I'll do it myself.
@mattoo6389
Жыл бұрын
Best way to do it mate, do the work yourself and you know its done right. HD are easy bikes to work on.
@francescod.5822
Жыл бұрын
Nice work! You updated only cam or also oil pump ?
@mattoo6389
Жыл бұрын
Just the cam, pump and cam plate are stock.
@francescod.5822
Жыл бұрын
@@mattoo6389 thanks for answer, and also tappets are stock?
@mattoo6389
Жыл бұрын
@@francescod.5822 tappets and pushrods are S&S
@francescod.5822
Жыл бұрын
@@mattoo6389 Thanks man, I think I will do the same on mine
@mattoo6389
Жыл бұрын
@@francescod.5822 the shop I use advised me that why the aftermarket cam plates and pumps are good they are somewhat overkill unless you plan on going for big numbers. I only planned on doing a cam, nothing more, so I took their advice.
@glenmacintosh2356
Жыл бұрын
Fuck that awesome
@boofattack
21 сағат бұрын
hey mate im from sydney do u wanna sell the bike ?
@lucab69
Жыл бұрын
Which license plate mount is that? Sick bike!
@mattoo6389
Жыл бұрын
It was a cheap ebay buy, the sellers name was "myholders"
@lucab69
Жыл бұрын
@@mattoo6389 right on thanks! Also did you run the bike with an exhaust and no tune? Or did you do everything at once? I ordered an exhaust and just curious if I can run it on stock map.
@mattoo6389
Жыл бұрын
@@lucab69 I ran the exhaust on a map from the TTS tuner. It was fine. I didn't get it dyno tuned until I did the cam upgrade.
@cesarpedrini1593
Жыл бұрын
where did you bought the foot pegs?
@mattoo6389
Жыл бұрын
Harley Davidson 80 grit pegs
@johnbeardsley7360
Жыл бұрын
i have NEVER heard of a stock 114ci with 118 hp......
@mattoo6389
Жыл бұрын
The 118hp was dynoed with the cam installed on the canned tune.
@motorcyclesandearthworks3196
Жыл бұрын
what sort of $$$ are we talking about?
@MrSuzukiyamaha
Жыл бұрын
What pipe is that?
@mattoo6389
Жыл бұрын
Bassani road rage
@allan9584able
11 ай бұрын
come on man , there way higher than all the dyno charts show across the major performance shops over the world, but in any case main thing is your happy with the performance , yeah there a good Cam great lope.
Пікірлер: 53