I’m glad I still have my 87evo. It may vibrate but there are zero issues
@BMFRich65
4 жыл бұрын
Evos were Harley’s best engine!
@jorgemanresa
4 жыл бұрын
Could you send me the link where to buy the push rod?
@BigFiveJack
3 жыл бұрын
5:17 Nice work coming up during the next 20 seconds, just what we needed to see!
@swiftcaution5170
3 жыл бұрын
Thanks for the help. This video is a year and a half old. Still have the bike? Any more issue with the oil migration?
@trikemike7291
2 жыл бұрын
I must tell you this is the best the best video that out here clear everything is clear to solve this problem thank you I appreciate this
@petergaiter8928
3 жыл бұрын
High..Great Video..Was wondering how I can get my hands on the Torque spec values as per the sheet in the vid??
@snakebite6511
4 жыл бұрын
Wow, this video just helped push me towards Indian. Why would anyone want to spend $30k on a bike then have to wrench on it? Thanks for the video and pointing me towards an Indian.
@applicator40usa69
4 жыл бұрын
Really, 5little torx head screws and 1 snap ring. You call that wrenching? Go buy your Indian. Been there,done that. 1500 miles later I traded that piece of crap.. you are misinformed
@Misty3133
4 жыл бұрын
I picked up my 17street glide special $22.000 and my friend got a 17 Indian for $30.000 the Indian has been in the shop three times and still can’t get out of its own way M-8 vs the 111 Indian 🤣🤣🤣🤣
@trekbsg
4 жыл бұрын
kzitem.info/news/bejne/qoloyomZk3OGhnY ..and this video convinced me to NEVER buy an Indian.
@dry509
4 жыл бұрын
Applicator 40 USA Not sure what you are saying...what are. You recommending? You traded in Harley or Indian?
@Misty3133
4 жыл бұрын
I just got a price of $59.00 for the push rod. Macomb County Choppers
@bjcdexterdog
3 жыл бұрын
Is this the Greg Williams push rod? And is Macomb County Choppers easy to find in a search engine?
@Misty3133
3 жыл бұрын
Yes and yes
@FabryRock
4 жыл бұрын
Is this the Greg William push rod?
@scotty2221
4 жыл бұрын
So what happens if I don't do this fix? Are all 107s needing this no matter the make of the bike?
@Ray-pw3yh
3 жыл бұрын
I have a 2020 ultra limited didn’t realize they put the vent already but bought the trask transmission vent already will this be more beneficial since I’m running 131 motor?
@marcelloanatra148
Жыл бұрын
I don't understand what is the difference between the original pushroad and the modified one? Where can the new pushroad be purchased? Is it possible to have the article code? Thank you
@eb1941
4 жыл бұрын
I have given up on HD. I have two TC88 bikes and will be dealing with cam chain tensioner design flaw from HD. M8 IS having multiple problems. HD seems to launch the product and fix it as problems are discovered.
@dry509
4 жыл бұрын
Please advise why you are doing this? I am thinking of buying one? I also heard about crank case pressure issues? Is this related to that?
@James-fk2sb
3 жыл бұрын
I thought they made a vent tube to fix this ?
@cavscout62
4 жыл бұрын
I fucking HATE torx head fasteners with a passion. I did the same swap on my ‘19 EGS even though I didn’t have the migration issue, I’m a big proponent of preventive measures. Replaced the torx head screws with Allen heads and that’s that. I also swapped the trans lube for Tribodyn gear lube and man did it make a difference! Next I’ll swap the factory primary chain tensioner for a Hayden auto tensioner and that will be it for mods.
@kevinhildreth2109
4 жыл бұрын
Is it marked which end of the rod goes in first?
@captpat02
3 жыл бұрын
Excellent video
@vetter847
3 жыл бұрын
Excellent video. Thanks
@flyingdog1498
4 жыл бұрын
Harley fucks up everything. $30,000 and major repair after 1,000 miles. What a piece of SHIT
@Misty3133
4 жыл бұрын
Thank you!
@jamescooke2433
4 жыл бұрын
If you have an issue just put your original rod back in before you take it to the dealership. There is no possible way they could tell. But ever since I did change the rod I haven’t had a single ounce of transfer and I put almost 6000 miles on it. That breather fix is a joke, who is the Cheapest Possible Way, Harley could fix their failure.
@MeathedMoto
4 жыл бұрын
Appreciate the info. Ive heard people have success either way. I decided on this route too as i just saw that mine has transferred about 7 oz. in 3650 miles. That push rod is so much tigher on the tolerance that its makes sense that it stops the tranfer better even once you consider it will get warmer as the engine runs and expands.
@TheDoronle
3 жыл бұрын
Hey James, great vdo thank you, any issues so far with Greg’s clutch rod?
@stevenkane8691
3 жыл бұрын
Where did u get it from
@chappy3438
4 жыл бұрын
Thanks for the video 👍🏻
@wolfemanbog4176
4 жыл бұрын
Was the fluid low on jiffy stand or straight up on jack
@boblafountaine9560
4 жыл бұрын
Dre Escamilla doesn’t matter.
@wtf0101
4 жыл бұрын
Remember every manufacturer has multiple issues, the problem is they won't they won't make it to a recall
@michaelhallas6450
3 жыл бұрын
They should make it a recall.its a factory defectf
@jorgemanresa
4 жыл бұрын
Thank man!
@andrewhughes7379
4 жыл бұрын
I'm looking to purchase a new 19 model M8. Is this a common problem with this engine
@eb1941
4 жыл бұрын
The M8 motor is in Harleys discover problems and fix as discovered. I suggest to wait two more years before buying, still working out the design problems.
@andrewhughes7379
4 жыл бұрын
@@eb1941 thanks mate, might look at a fatboy instead of a tourer. From what I've heard the problem is only in the tourers.
@Hunterjl64
2 жыл бұрын
All M8 have the problem, you don’t know it because 2020 and up the vent is already installed in the new bikes
@edwarner3826
4 жыл бұрын
Can someone tell or point me to how this fixes the problem? Just want to know. Thanks
@jamesdaughtrey
4 жыл бұрын
I installed it on mine and it didn't work. Not to say it wouldn't work for others but it didn't on mine. The vent tube is next.
@jimscycleandautotn8508
3 жыл бұрын
It gives the bike 1000 plus horsepower
@relayjim
4 жыл бұрын
Be careful with this fix. It will void your Harley warranty. The HD fix is a primary breather kit and all 2019 and 20 touring bikes come with it from the factory.
@jimscycleandautotn8508
3 жыл бұрын
And is a harley warranty worth a fuck anyways? Lol
@daveb4583
3 жыл бұрын
My 2019 Road glide ultra did not come with this vent from the factory!
@rickschlamp4797
3 жыл бұрын
@@daveb4583 same
@Hunterjl64
2 жыл бұрын
Wrong, my 2019 street glide didn’t come with the vent, I was told 2020 up had it installed…..
@kevinwilliams8907
Жыл бұрын
Have a 19, 114 M8 and it did not come from the factory with the vent kit, it does have a transfer issue and Harley no longer covers the install to fix the issue, its now customers cost.
@MrMikeSteves
3 жыл бұрын
part number?
@willmcculloch9346
5 жыл бұрын
And, did it fix the problem still? I just bought a 2020 UL. About to do the 1K on her now.
@jamescooke2433
5 жыл бұрын
Yes it has fixxed mine, I have 1500 miles on it since the fix and fluid change, my trans level is right on the money, and I use redline so its easy to read. will pull my derby off at 5000 miles and see if anything came over.
@lenjames
4 жыл бұрын
Take it from me...I have a 2019 RK Special that had this problem badly at only 700miles. The build date of my bike is 2/19. As of May of this year all HDs will have a vent on the back side of the primary case installed at the factory. My bike was done under warranty at 1600 miles and now I have 4900 miles and not one drop of oil has migrated to the primary. I ride hard and long distances. This fix from HD worked. Also you can buy this kit and do it yourself.
@mohammedalolayyah3272
4 жыл бұрын
James Cooke hello buddy how’s the oil now? Is fixed?
@snakebite6511
4 жыл бұрын
Yeah, thats what i want to do, spend $30k on a brand new bike then have to wrench on it. Thanks for pushing me to Indian.
@tommydanger60
4 жыл бұрын
your 2020 should have the vent already, they started installing them mid 2019.
@matthewlidel4324
4 жыл бұрын
Don’t buy it doesn’t work me and friend got this didn’t do anything for us...guy I work with got it his still leaks also,
@FabryRock
4 жыл бұрын
Do you mean the rod ? Do you have also the vent tube ? Thx
@tjzulu1
Жыл бұрын
That's not the correct way to torque those bolts down!!! And you didn't say whether it fixed the problem or not...weak video all the way around!!
Пікірлер: 63