Your right it is a punch a bullshit to do that job right 👍.
@guyconnell2250
9 ай бұрын
I made my own 3rd hand tool. The issue I have is keeping the right side cam from moving when tightening the axle nut. If/when it goes a little off, the rear wheel alignment will be off. I've taken to using a vise grip to hold it in place. That does work. Most of the time.
@gabedimeg1082
Жыл бұрын
Check your preload on your Ohlins shocks. I dumped all the preload and suddenly it wasn't fighting itself sideways and tightened up without shifting any more. Just re-add the preload once torqued down properly. Hope that makes it easier for you in the future.
@7o177
2 жыл бұрын
super fascinating i wonder why the stop is where it is instead of where you put the vice grips? does it need to fully rotate to be removed? could you get a welder to add a couple dabs of metal there to stop it rotating?
@user-bl8bn4kb8m
2 жыл бұрын
Love the passion
@user-bl8bn4kb8m
2 жыл бұрын
I am going to take mine off in the coming weeks , i will have my wife help me or by a axle adjuster kit from kraus
@Bigpat209
2 жыл бұрын
Thank you, this worked👍
@Old-n-slo-locked-n-leaned
6 ай бұрын
Thanks for this video. I had the same problem and had no idea HD updated the axle and cam adjustment plate for 2020 and later and it’s a retrofit for 2014-2019. There should be a recall.
@evacoutdoors5867
6 ай бұрын
What is the current one like?
@maynardjames9533
Жыл бұрын
Why hasn’t Harley addressed this! Also the damn shock bolt in the way 🤦🏻♂️
@nickricholetti754
Жыл бұрын
literally going through the same thing right now.
@robertwoods453
Жыл бұрын
I started to drill a hole thru both cams and frame and put a bolt thru to keep them in place!! They kept turning on me!! Design really sux!!
@robertwoods453
Жыл бұрын
I have a 2014 streetglide and played HELL with the damn cams!!! Same problem!! Had to get Wifey out to hold the one side with box end wrench while I torqued the nut!! Pain in the f'ing Arse!! Gotta be a better way!!
@sinb6402
Жыл бұрын
100% agree
@nickricholetti754
Жыл бұрын
UPDATE …. harley upgraded their axle in 2020. It has newer cam plates and tighter tolerances with no play. Part # 43000213 also doc harley does a video on it kzitem.info/news/bejne/25Wilp-Qf6aGd20
@johnhass2224
5 ай бұрын
I flipped my axel so my cams go the other way because my axel kept dropping the cams downwards and would cause way to much belt slack so now my cams go the other waynow they shouldn't loosen up.
@Anips024
2 жыл бұрын
Same bullshit on 2008. Was fighting mine yesterday....
@jakewatson1986
Жыл бұрын
Hey man where can I buy these tools
@evacoutdoors5867
Жыл бұрын
Hardware store?
@tompeppint.v.3803
Жыл бұрын
Is there no safety pin keeping the nut from working off ?!?!?
@brush5072
10 ай бұрын
There’s a snap ring keeping the nut from coming off..
@Ray-pw3yh
Жыл бұрын
A1 cycles. M8 axle locks or big bear Axle locks will solve the issue
@mikesteele1789
Жыл бұрын
Cam adjuster upside down.
@evacoutdoors5867
Жыл бұрын
No
@edwinparedesnjusa
2 жыл бұрын
Because Harley-Davidson just wants your money they don't care about quality they don't care about you 💯
@veteransceremonyharshawwi7452
Жыл бұрын
Cam adjuster Axle- 100% bullsht, And no hinge on rear fender to remove tire, (old school Harleys)- New engineers should be working flipping burgers instead of #ucking up Harleys.
@marcnunes6916
2 жыл бұрын
They are horrible
@jimfrancis934
11 ай бұрын
Thanks for the help, this video would have been better if you had chosen not to use God's name is vain.
Пікірлер: 30