Sorry I do not offer a repair service, this video is for information only.
@heathman4478
2 жыл бұрын
Nicely done. I wish all tear downs were this well made.
@neilhester-tech
2 жыл бұрын
Thank you 😊
@A388Flyer
Жыл бұрын
The spring tang is in the wrong location... that causes the battery door to want to stay closed, when it is supposed to spring open. You need to flip the spring around so that top part is on the other side, then when you install the door and the pin into the camera, make sure that tang sits against the visible part of the battery compartment. I checked with another BMPCC OG I have, and then it sprung open properly.
@neilhester-tech
Жыл бұрын
Thanks for spotting that, I've now swapped mine around too, I'll pin your comment to the top for other viewers too ;)
@Automotivesp
2 жыл бұрын
niceee. the ubs port is quite easy to replace. also by seeing how the sensor cooling is done, u can see it depends on the alloy case. so i m sure its better off without the rubber black cover..
@Xhanoir
2 жыл бұрын
Also looks better
@neilhester-tech
2 жыл бұрын
I didn’t look at the USB port but I don’t think it’s a major problem for most owners, the Micro HDMI is the biggest issue with these cameras. I haven’t heard of over heating problems but people are of course welcome to modify their own in any way they like.
@Automotivesp
2 жыл бұрын
@@neilhester-tech sorry u are right i was mistaken for hdmi port
@Altcine
Жыл бұрын
Thank you for this tear down. Do you know if there's any extension ribbons available for the rear buttons & screen?
@neilhester-tech
Жыл бұрын
You’re welcome 😉 I don’t know I’m afraid but I don’t think it would be a tough job to get them made by an electronics PCB manufacturer but it won’t be cheap. You might be able to get replacements if you talk to blackmagic support.
@DanorGerald
6 ай бұрын
Just lost the hdmi port on mine after many years of good work. Just pushed too hard and the micro hdmi port broke free of the board. This makes it obvious that you can't get it fixed unless you have a high end micro-soldiering technician to reattach those legs. Bummer b/c it makes a great 3rd camera for streaming. But alas it's better to just buy a new one for any output needs. Well done though.
@MagieLamp
3 ай бұрын
i wish there was some soldering techs around cuz i really wanna fix mine
@the_ancient_ways
Жыл бұрын
Thank you for the advice 👍
@NeilHesterSkateboarding
Жыл бұрын
You're welcome !
@ivanshafiq2915
Ай бұрын
☺☺👍👍❤❤
@madedigital
2 жыл бұрын
Thanks i did this with first one ...it never worked again i just wanted to get the rattling hdmi port out...i ha second one and the port broke again i want get the port out but i may brake that monitor connector i have big hands i wait for the part 2 i can live without hdmi
@madedigital
Жыл бұрын
i guess im living without hdmi
@cryptofitnessandgaming-cfg
Жыл бұрын
Can i send it to you for for repairs? How much does it cost?
@Xhanoir
2 жыл бұрын
I would totally put thermal paste on the copper holder, that acts as a cooler.
@neilhester-tech
2 жыл бұрын
I would only disturb this if there was actually an overheating problem , which I haven’t seen. Easy to do if that ever becomes an issue in the future.
@Xhanoir
2 жыл бұрын
@@neilhester-tech Completelly agree, but believe me, once you get an overheating alert from a mirrorless for recording 5 minutes in a radio studio, you take it as a heavy issue.
@255REEF
3 ай бұрын
I have a bmpcc og that needs to brought back to life it recently just gave outon me any help?
@studioset49
4 ай бұрын
Sensacional
@usernamenotvisibIe
2 жыл бұрын
Thank you!
@neilhester-tech
2 жыл бұрын
I hope it’s useful to you 👍🏻
@leom.5814
Жыл бұрын
Hello ! I wish I could replace the dc plug into a D TAP, I love this camera so much but the powering solution is so bad. Do you have any idea for this ?
@MagieLamp
3 ай бұрын
i would just run power from v mount to the camera with a dtap-to-bmpcc power
@leom.5814
3 ай бұрын
@@MagieLamp I meant about the plug. This is so cheap i loose power randomly
@Miguel.Garcia
Жыл бұрын
Anyone know where I can buy a replacement screen?
@TheSshadow7
Жыл бұрын
No. But the model number is display module Ts7235u. I can't find any online, but that's the model.
@personalchat9262
Жыл бұрын
Where i can buy the lcd bmpcc og, please need help!
@michaeldietrich880
22 күн бұрын
Hi my HDMI broke do you offer repairs?
@neilhester-tech
22 күн бұрын
Hi, Sorry I dont.
@emilsinclair
Жыл бұрын
Has anyone ever had a problem with the dc socket? Mine ist not working anymore. Camera is doing fine with internal battery, dc socket is dead.
@NeilHesterSkateboarding
Жыл бұрын
Probably a broken solder joint from the connector to the PCB
@user-xu1cg2rb8v
7 ай бұрын
Im having issues with my bmpcc og can i contact you via email ?
Пікірлер: 37