I’m not convinced the pin makes huge difference. Others said they used heat to remove it..I think the co2 restrictor holds the biggest increases. Thanks for the vid.
@Seabass1206
Жыл бұрын
and it can be drilled out to 1mm anyway without kit
@izg2
8 ай бұрын
I love the barrel target set up!!! Thanks for the video!
@thellc24-7
8 ай бұрын
Thanks for watching 💥💥💥
@johnnybbgunner2136
Жыл бұрын
Very nice and creative pellet trap brother. Earned my sub.💪🏼
@thellc24-7
Жыл бұрын
Thanks! Much appreciated 🙏🏾. More to come💥💥💥
@Spacecruizer203
Жыл бұрын
Two of those duel wielding is a force to be reckoned with idgaf good stuff bro bro 💯
@thellc24-7
Жыл бұрын
I may get another 50 to keep stock for pepper💥💥💥
@Spacecruizer203
Жыл бұрын
@@thellc24-7 def and the acid bath rounds lol jk
@tjones3825
Жыл бұрын
Your videos keep getting sharper and sharper L🔪 Could have sworn you faded to black in the first segment😁Would love to see you get a reading on her! Maybe a heavier ball?? 🤔 I just checked out your homemade ammo video, Very nice brother!! You should mosdef hook some up and revisit this one. ✌️🙏💯💪
@thellc24-7
Жыл бұрын
Yes. I did do a fade. I hit stop instead of pause so I had to put it together. Hahaha. Plan is to revisit the homemade stuff in a future vid💥💥💥
@Chefranger
9 ай бұрын
Love the target barrow you made
@thellc24-7
9 ай бұрын
Thanks 💥💥💥
@neilplace7916
Жыл бұрын
I'd like to see a chrono reading. It appears to be quite powerful.
@chemicalbreath
2 ай бұрын
T-M4 mount for the HDR 50 • by Toursekev looks awesome. Have the longer barrel and the P2P HDR 50 Launcher.
@thellc24-7
2 ай бұрын
Yes. I have seen this. It is in oreorder status atm💥💥💥
@LessLethalDad
Жыл бұрын
Very odd that the 7.5 joules version had a restrictior disc in it already. I have an og version from three years ago so maybe it's different now but I don't recall a disc...only in the 11j. Try using heat to remove the pin, this should loosen up the locktite. Great build LLC 💯👊👍👍
@thellc24-7
Жыл бұрын
I'm not going to bother with the pin. It's not going to be much of an increase in power. But, I'm not done with it yet💥💥💥
@-Gooner76-
Жыл бұрын
The 7.5 doesn't have the disc in the handle,all you had to do was take the block out
@Seabass1206
Жыл бұрын
would the tr50 7 joule even fire with the disk in and restrictor, it’s also not threaded so i think its a mistake
@FLAlesslethal
Ай бұрын
7.5j come no disc. That's why they sent one because without the valve it will fart if you don't install the disc. But the 7.5 hasore room to hold CO2 so the upgrade is more powerful when done to the 7.5. It really is an awesome setup.
@FLAlesslethal
Ай бұрын
Great video content My friend+ I think the setup/ furniture you had taken off looked badass! Can you please tell me the info on the optics and light? Does the light have a laser top? Anyhow, great job bro.... 😎👍
@FLAlesslethal
24 күн бұрын
Hey bud, great great vid content. Always watching. Hey i got 100 4grm riotballs for my fully moded tr50 and they fall right through the cylinders chambers. Are the tuning cylinders what i need are the wholes on them smaller or? Thanks for any advice? 🤘😎👍💥
@thellc24-7
24 күн бұрын
Thanks for watching! So what you need to do is size your projectile to your barrel. It could be .50, .510, .49. See what I'm getting at? I'm not quite sure what the stock bore size is. In my tuning barrel, I use 1/2 inch (.50 cal). Hope this helps💥💥💥
@smokingunclefrank6037
Жыл бұрын
They lock tight those pin's in the only way to get them out is heat from a torch or heat gun. All i ever did with mine was change the regulator valve to the 11 joule from the stock 7.5 seems powerful enough for me cracks coconut
@arsenelupiniii8040
7 ай бұрын
Can push em out with a soldering iron as well, that way you heat the pin and the loc tite melts.
@Chicagocustomkinetics
Ай бұрын
nice job , Its amazing that 1.2s hit that hard 🤨
@madedigital
Жыл бұрын
the screw in the chamber st uck you needed to heatit up first it has loctite 243 on it ...then is comes out you can always order a just that part.
@thellc24-7
Жыл бұрын
Yeah. I know. The head is now ruined, so there's no slot for a screwdriver anymore. Changing the pin won't make that much of a difference anyway 💥💥💥
@malias4
Жыл бұрын
Great video , can u tell me the laser under the gun which brand it is and where u bought it ? Thanx
@thellc24-7
Жыл бұрын
Watch this video here. kzitem.info/news/bejne/2mtornaMgKiJhZg 💥💥💥
@ma5056
7 ай бұрын
Can I please have a link to order the upgrade on Amazon or Aliexpress?
@petersmith6974
Жыл бұрын
Yep 👍🏻 they are more effective like that.I have done the same to mine.
@runerebel8441
Жыл бұрын
Nice power 💥. Congratulations. Now you have a hand-cannon💥👍. Take care and happy shooting my friend 👍😃. Btw , no need to change the pin. You will only get max 1 joule more power with a shorter pin 😉
@thellc24-7
Жыл бұрын
Good to know! Thanks for the tip💥💥💥
@runerebel8441
Жыл бұрын
@@thellc24-7 Iam glad to help. Take care and have a great weekend 😃
@airgunballistics1779
Жыл бұрын
Hey man did you have trouble with the trigger after this install? My trigger is extremely stiff now..
@thellc24-7
Жыл бұрын
Yes. Mine did get a bit stiff after installing the barrel 💥💥💥
@airgunballistics1779
Жыл бұрын
Thanks! It needed a little work..
@smokingunclefrank6037
Жыл бұрын
I'd call that a win under 2 gram balls doing that much damage good show old man
@thellc24-7
Жыл бұрын
Agreed💥💥💥
@Screamingtut
8 ай бұрын
you should try rubber ball ammo and steel balls with that mod. they will hurt. mine is an 11j gun I would like to do the 16j mod. what mod was yours?
@thellc24-7
8 ай бұрын
I believe this has the drilled restrictor, valve block removed, tuning barrel. Right now, it is totally unrestricted and fueled by hpa💥💥💥
@tim4cn759
7 ай бұрын
Nicely done....Go check out the huben gk1 pistol .25 cal.. it's a beast 💪I do want to get the one you're showing but it's just not even close... I spent a pretty penny for it but it's worth it 👌
@thellc24-7
7 ай бұрын
I have one. I've posted about 8 videos on it already💥💥💥
@tim4cn759
7 ай бұрын
Nice.. I am now a subscriber ... knowledge is power 🔋
@johnnybbgunner2136
Жыл бұрын
Can you convert one of these beasts into a PCP version that would obviously be hand pump friendly?
@thellc24-7
Жыл бұрын
I think there is an adapter that requires you to drill a hole in the back for an adapter. It's for the HDP50 I believe. Also, I have this video: kzitem.info/news/bejne/lJCfy3qmmGNegIY Thanks💥💥💥
@2c-BA
Жыл бұрын
It appears you have a "RED" button chrono which only goes up to an fps of 399. So, the reason you may not be getting a velocity reading post mod, is potentially due to the fps exceeding 400 fps. The "Yellow" button version (almost) reads velocities to 700 fps.
@thellc24-7
Жыл бұрын
Yes, that is correct. They are impossible to find. Perhaps you know of a place?💥💥💥
@johnnybbgunner2136
Жыл бұрын
My chronograph goes up to 9999 fps!😳
@johnnybbgunner2136
Жыл бұрын
399 fps would hurt with pepper 🌶️ balls.
@raymondmartinez8991
Жыл бұрын
👍🏻💯👍🏻
@DBRGB
10 ай бұрын
It’s reading 400 or above when you get 00.
@thellc24-7
10 ай бұрын
Yup. It sure is💥💥💥
@11bravo13
7 ай бұрын
Have a 22 joules custom job........Bang Bang.....
@jarethhill5901
9 ай бұрын
Would u mind dropping me links to were u got ur upgrade parts ive been considering getting one of these
@thellc24-7
9 ай бұрын
I got them from Riotballs dot com.💥💥💥
@jarethhill5901
9 ай бұрын
@@thellc24-7 thanks ill give it a look
@Sola_Scriptura_1.618
Ай бұрын
Love your channel! Great stuff.
@sqnhunter
6 ай бұрын
Good mod. Not the complete factory mod, but then, looks like it isn't required. Solo the valves is enough. I dont think you need the extra barrel. It definitely did had more inertia power as it not only dented the pan but also seemed to have a larger push dent around the strike position. Predator metal pellet is boing to do some real damage up close. Fatal to head shots. But with the light ball you were using...it is going to take a real determined dude to try and get through 3 rounds never less the full six. Bruise like fuk!
@jasonmaruszak812
4 ай бұрын
The pan might be penetrated with better ammo and if it was secured and not dangle as the energy displaces when it swings around
@thellc24-7
4 ай бұрын
Yes. I realized this, and changes have been made since. Thanks💥💥💥
@jasonmaruszak812
4 ай бұрын
@@thellc24-7nice video though, I pulled mine apart a couple weeks ago before getting the power kit together so now I’m looking to make sure I put everything back correctly. I also suggest the Mercury rise torpedo 50, and the umarex 68 cal 16 joule. Both hit hard out the box and you can play with all kinds of ammo!
@thellc24-7
4 ай бұрын
@jasonmaruszak812 I have the Mercury Rise TR50 as well as the HDR68. My 68 is well past 16 joules. I do need another hdr68 though 💥💥💥
@jasonmaruszak812
4 ай бұрын
@@thellc24-7nice- did you tune up hdr68 from the stock or 16J? Mind sharing how? I have both and would love to make them cannons. I also like the decimator rounds, steel balls, and ammo from cordodo
@thellc24-7
4 ай бұрын
@jasonmaruszak812 started from the basic model. My vids should be all on here. Just scroll back💥💥💥
@alex43rd
9 ай бұрын
What screw driver can I use for the TR50? I have 3 screws around the top barrel that won’t budge. I’m trying to take out the valve block and put in a new barrel
@thellc24-7
9 ай бұрын
I used the mini screw driver kit. It has like 5 or 6 on it. Red case clear top. I think they are made for repairing eyeglasses. Use the Phillips head💥💥💥
@alex43rd
9 ай бұрын
thank you @@thellc24-7
@thellc24-7
9 ай бұрын
@@alex43rd 💯💥💥💥
@user-tm8hs1gv7e
Жыл бұрын
Hi. Can u tell me the tuning barrel specification and how price is it?
@thellc24-7
Жыл бұрын
You can find it and the specs on Riotballs dot com💥💥💥
@lesslethalfordummies
Жыл бұрын
Skip the short pin or at very least do it absolutely last. The shorter pin has proven nothing in terms of gains so far. Still amazes me how consistent unmodifed markers perform. Can wait to see your results. Doh! I should finish the video before commenting 😂 Good test. Its another thing i havent tested with is a co2 restrictor. Not bad at all.
@thellc24-7
Жыл бұрын
Hahaha. Thanks! It took me long enough to do this mod💥💥💥
@lesslethalfordummies
Жыл бұрын
@@thellc24-7 not speed but precision 😉
@thellc24-7
Жыл бұрын
Ahhh. I see💥💥💥
@Spacecruizer203
Жыл бұрын
Yea they did their homework making these
@michaelfoxfoxster469
Жыл бұрын
You need a real chroni to test with, never seen one like that anyway.
@Camtofunny19
7 ай бұрын
I would like to see you Test it in a whole chicken with different ammo
@sven471111
7 ай бұрын
Chicken has nothing to do with reality, it's just for effects. Use some pork meat or ham with skin on it.
@mandef1417
Жыл бұрын
If you put the Chronograph in the same place with a barrel extension you will have no measurements it is just logical serious it takes into account the departure out of canon. It's as if you put it behind you when it is normal put it towards the end with you have extension barrel you will have you are measures xD 😮😅
@thellc24-7
Жыл бұрын
Ok. Ill give it a try. Thanks💥💥💥
@mr.severeclear85
9 ай бұрын
that is 100% self defense gun now :))
@thellc24-7
9 ай бұрын
Yes it is💥💥💥
@graziflorida4377
7 ай бұрын
He skipped the unscrew part for a reason, THE SCREWS DO NOT COME OFF!
@thellc24-7
7 ай бұрын
What screws are you talking about?
@Silentprofessional1
Ай бұрын
What ammo are you using for the first test?
@thellc24-7
24 күн бұрын
Some cheap 1.5 gram riot balls from amazon💥💥💥
@playerroku4412
8 ай бұрын
Are there any details videos in English to do upgrades on this? I sent mine out for a total of 164 to get it to 20 joules. Not trying to do that again andter 3 months of waiting lol
@thellc24-7
8 ай бұрын
They are few and far between. I had to struggle to find a good one myself💥💥💥
@sven471111
7 ай бұрын
Look at masakra or maddog.
@j.whisper2379
5 ай бұрын
Don't you need to put the chrono head in front of the barrel tip? What am I missing?
@thellc24-7
5 ай бұрын
This is how you use the hand-held X-RADAR 💥💥💥
@j.whisper2379
5 ай бұрын
@@thellc24-7 ! Right! Makes sense. Batman!
@mandef1417
Жыл бұрын
XD 😂 It is logical that you have not had measures you have lengthened the banana barrel so your Chrony must you put it further thought 🤔
@cayrick
9 ай бұрын
I am looking at something for home defense. Where I live obtaining guns and licences is not easy. I was looking at this or a crossbow. Would welcome opiions. Thanks!
@thellc24-7
9 ай бұрын
If those are your only options, do not pick the crossbow. You want to be able to send multiple shots in a short period of time. It takes a long time to reload a crossbow unless you find one that has a mag and can auto-index the projectiles 💥💥💥
@mygt8a4re
9 ай бұрын
@thellc24-7 or get both, have the crossbow ready as back up 😉
@shaggyblondguy9527
5 ай бұрын
So the hdr50 and the tr50 take the same upgrades?
@thellc24-7
5 ай бұрын
It's the same marker. Umarex just changed it from HDR50 to TR50💥💥💥
@madedigital
Жыл бұрын
when it read nothing its over 400fps use heavier balls to get a reading
@brucehudson3269
7 ай бұрын
How much does it cost,an where to order it
@thellc24-7
7 ай бұрын
Google has your answer💥💥💥
@Wecanhelp
5 ай бұрын
U had to heat it up
@brucehudson3269
3 ай бұрын
Where can I buy it, how much does it cost
@thellc24-7
3 ай бұрын
USMCS dot com. Use code LLC24-7 for 10% off💥💥💥
@trevligodmjuk2721
8 ай бұрын
I have one tr50 modified. 308fps with Devastator 4.8gram. How many joules do you think ?
@trevligodmjuk2721
8 ай бұрын
Install the pin today.. Open cylinder, drilled 1.5mm, that brick in the handle..barrel extender. 1. shot 326 psi 2. 364 3. 316 4. 302 5. 254 6. 180 Devastator bullets.
@thellc24-7
8 ай бұрын
Looks like 21 joules💥💥💥
@trevligodmjuk2721
8 ай бұрын
@@thellc24-7 364psi = 29 joul with Devastator. Calculator on the internet.
@trevligodmjuk2721
8 ай бұрын
@@thellc24-7 I own 6 HDR50..All modifed different. Have many other bullets but the devastator is the best.
@thellc24-7
8 ай бұрын
@@trevligodmjuk2721 it was in response to your 308fps question
@joey69891
6 ай бұрын
I had to drill my out, it was not that hard to do.
@hamelnbeach
Жыл бұрын
Where do you hold the chrono??
@thellc24-7
Жыл бұрын
Left side of the marker, against yhe barrel, a couple of inches back💥💥💥
@hamelnbeach
Жыл бұрын
@@thellc24-7 You should try it again with the chrono holding on at the end of the actual barrel. As the projectile keeps accellerating along the barrel...
@daeng574
6 ай бұрын
I wanted pieces only one .
@thellc24-7
6 ай бұрын
I don't understand 💥💥💥
@joshjosh575
8 ай бұрын
Kool story bro. I’ll stick with my 9mm.
@thellc24-7
8 ай бұрын
Ok💥💥💥
@Sven-on3bb
8 ай бұрын
Not convincing, no Joule data, no comparison of the steel plate with 7 Joule
@thellc24-7
8 ай бұрын
Go back and watch the stock video, then💥💥💥
@rumtata
6 ай бұрын
Throwing rocks for homeprotection is more viable than this
@thellc24-7
6 ай бұрын
Well that's your opinion. Thanks for watching 💥💥💥
@1sammyson
Ай бұрын
@thellc24-7 So dumb
@Seamonkey292
Күн бұрын
You clearly have no idea what you are talking about. My unmodified HDR50 with Devestator Rounds knocks a hole in a tree deep enough to put my pinkie finger up to the first joint in. If you get shot at Close range by an Hdr50, it will mess you up.
@corsomike1
9 ай бұрын
Inferior testing equipment. Not doing what kit suggests and not having ability to work on it without destroying parts . Total fail in my opinion
Пікірлер: 136