SUPPORT THE CHANNEL and help us make more content! Buy rubber tracks, heavy duty tooling, and undercarriage parts at tinyurl.com/Support-TekamoHD
@beng231
2 жыл бұрын
Thanks for the info brother all the best!
@TekamoHD
2 жыл бұрын
No problem! Hope it was helpful!
@kukukud3n
4 жыл бұрын
Very informative video! How often do you have to adjust the excavators tracks. Is this a yearly thing or a monthly to do this preventive maintenance.
@TekamoHD
4 жыл бұрын
It varies from machine to machine but it's important to check track tension regularly. Manufacturer spec books will show measurements on how tight the tracks should be.
@Fatnfly
2 жыл бұрын
Should have explained how to losen them as well incase someone over tightens the track. Otherwise great vid!
@jordanstaal7238
2 жыл бұрын
How do you know what's properly adjusted?.... Is it the tolerance between the track chain and bottom rollers?
@آلاتثقيلة
2 жыл бұрын
Thank you for information
@shockey49
3 жыл бұрын
Hey I just used your video for reference. Forgot how many inches the track needs to be hanging after lifted and rotated in reverse. My machine is a 321D Lcr. Thanks
@fulminantegris2068
2 жыл бұрын
thanks Keith, great video. I'd love to see a hint or two, how to loosen the track without creating a catastrophe or grease yourself ... ;)
@آلاتثقيلة
2 жыл бұрын
Good job brother
@mechad9899
2 жыл бұрын
I believe you mean to say makes track frame longer not car body
@4RyanEck
2 жыл бұрын
I had an employee over tighten the track, how do you release the pressure in order to set it properly?
@TekamoHD
2 жыл бұрын
Ryan, check out about 1:48 into this video and it should explain, basically remove the grease valve with a wrench, where the grease initially went into. You should then start seeing grease coming out. But careful not to let too much out, otherwise you'll need to pump more in. kzitem.info/news/bejne/orBjzWpsZomkpKQ
@aragonkacena9185
Жыл бұрын
What means when im moving digger and allways going to one side?(right side)no much but little bit specialy when im going quick.
@radhouanebenzirar9327
4 жыл бұрын
Peace be upon you What is the reason for water mixing with diesel in the C18 engine?
@_TheSpaceCat
3 жыл бұрын
Probably water condensation?
@jonharrington4454
3 жыл бұрын
What should it be for a steel undercarriage on a 305e2
@TekamoHD
3 жыл бұрын
Hey Jon, that information should be located somewhere in the manual that came with your machine. If you no longer have access to it, we recommend calling up your local CAT dealer to see if they can send you one. We'll see if our friends at Rent1/SmartCast Equipment has a 305E2 we can borrow to make a video for you. Is there any other machines you work on that you'd like us to incorporate into our videos?
@jonharrington4454
3 жыл бұрын
I have the Manuel it is specific to rubber tracks we had steel tracks special made I’m gonna call the company who built them...
@jonharrington4454
3 жыл бұрын
No but I’d really love a video specific on slew greasing and general maintained that I can share with our employee
@stanleymartin1351
3 жыл бұрын
Grease comes out of hole under. Nipple on track adjuster
@moseschaile6637
2 жыл бұрын
I disagree with this type of adjustment, those fingers wont give you the correct track tension, you need a straight edge and a measuring tape. You find the specs in the manufacturer's manual.
@johnsecord8539
Жыл бұрын
When u adjust enough tracks on machines. U know by eye where they should be about.
@Kiwi_T-Bone
3 жыл бұрын
Sorry but that's way wrong. Pretty close end result but incorrect all the same. Straight edge and a tape measure and don't ever stick ya hand in where you did. Dumb people will watch this and lose hands ffs...
@Ehxx
2 жыл бұрын
I do agree it's not a great idea to stick your hand there. It's very unlikely, but if a line blew, you now have mush for a hand.
Пікірлер: 27