Nice video. Idk why people always insist on going back with the fabric. I’ve done two of these. My 07 Ridgeline and my wife’s 13 Jetta. Instead of going back with the fabric, I spray painted them. Once you get all of the old adhesive cleaned off, pick a color that matches the interior, spray paint it with a couple coats, let it dry overnight and re-install it. Both of mine look good, and guess what, I don’t ever have to worry about the stupid cloth sagging again! 🙌🏽
@JM-bi6yx
2 ай бұрын
Do you have any photos of it
@midwesternwelds1197
Ай бұрын
No say it looks decent 😂
@techtech9062
Күн бұрын
U gave me good idea man thanks
@J.A.S.Create
3 жыл бұрын
Great video. This is just what I have been looking for so I could address vibration issues when playing music in my GLI. I did a video for removing the rear deck but was scared to remove the headliner. Glad you did it LOL
@07gaucha
3 жыл бұрын
My jetta headliner is all mess up so I found your video ,let's see if I can do it lol 😆😅😂 thanks buddy to share this with us
@euggunduz4621
3 жыл бұрын
could you handle it ? i think too but i don't dare
@doroboro9700
3 күн бұрын
დიდი მადლობა ამ ვიდეო ინსტრუქციისათვის. გავაკეთე ამის მიხედვით. დასჭირდა 2 დღე. მინდა ავღნიშნო რომ გოლფ 3 უფრო რთული იყო რადგან პლასტმასის კლიფსები ადვილად ტყდებოდა. ჯეტაში კი მეტალის კლიფსია. წარმატებები )))
@angelgabriellovo
2 жыл бұрын
Un perfecto trabajo, muchas felicidades. Me dispongo a hacer lo mismo en mi Town & Country 2007. Saludos y que esten muy bien.
@lukenbryant4005
3 жыл бұрын
My headliner is basically sagging all over. It started at the overhead console and I tried to glue it up, now it looks like crap. This video was really helpful man. Gonna go search for this fabric. Lol
@raymondwilliams8754
3 жыл бұрын
Joann Fabric stores have it
@user-tw2ot8kf8t
11 ай бұрын
Great Video! I did my gluing differently. I used 3M canned spray adhesive and only worked about a foot section at a time. I could not figure how I could glue the entire roof pan and then lay the headliner down without massive wrinkles. Working a foot at a time starting back to front seemed more manageable for me. Thanks for the video!
@wilberforcekirwana1118
2 жыл бұрын
Great, it’s an educative video. Thank you very much. Keep it up Sir.
@morenomoreno4339
Жыл бұрын
Gracias por tu buen video muy educativo! Sigue adelante con tu buen trabajo. Gracias 👍
@jujitzujesus
2 жыл бұрын
Great video! I've been keeping my tinted windows up to hide the headliner that is flapping around. It's stoopid embarrassing! This will be very helpful, thanks for posting 😁👍 time to get to work!
@cjwills2757
9 ай бұрын
Thank you for the video. The first half was done very well. I wish you would have taken more time with the last half to show reinstalling details. It was obvious you had a few trials getting things lined up or snaps back in.
@jeffkelly636
Жыл бұрын
I wonder if there's any surface prep or adhesion promoter that can be done after scraping off the old foam, and before applying new glue. Good job!
@hd221813
Жыл бұрын
Really a great job! What measurements should the new cloth have? 1.8x2.2 meters? 1,9x2,4 meters?
@chriswillett5612
2 жыл бұрын
I was told the windshield had to be removed in order to fix the headliner. Your video is proof that it doesn't.
@AdonayLopez
2 жыл бұрын
That’s crazy whoever told you that.
@adambeiter63
8 күн бұрын
A pro will probably tell you that because there is a slight risk of damaging the board by doing it this way. Very small chance lol but it covers them and 99% of people will just say okay
@VENCONSTRUCTION
4 ай бұрын
Sounds really nice.
@grossepioche
3 жыл бұрын
Very Nice Job thanks for sharing your knowledge
@leniyemsvictorero2360
Жыл бұрын
thank you for your video great job! what is the fabric material you used for the head liner board ? thanks
@cincokees631
2 жыл бұрын
Thank you for sharing
@Born_Stellar
3 жыл бұрын
should i... should i say it?... kinda looks like crap. I'm guessing thats why you didn't show more but: 16:31 its not really staying down that well in the corners and 18:14 whats with all the dimples? anyways i'm not hating, I have done it before but was just a flat ceiling. But I have also messed stuff up too and had the headliner fall down, so hope yours stays up at least.
@AdonayLopez
3 жыл бұрын
Yeah i try my best being the first time... we actually messed up the first fabric it was going to be all black lol, but we have to learn some how. Thanks for watching.
@kenalexander3046
3 жыл бұрын
Awesome video! Thank You!
@MyJeremy79
3 жыл бұрын
Great job man
@Kevthebish
Жыл бұрын
Guys, do yourself a favor and buy the factory brand new one for $300 dolares. If not, go to your local junkyard or Pick-n-Pull where you can get one for even cheaper! This guy has a great idea and I'm sure he has a lot of talent but boy you better have the time to do it. I hardly have the time to install it never mind bring it to an upholster!
@funkdoctor9663
Жыл бұрын
where can you buy oem headliner fro 300? i have only found prices at 900
@Kevthebish
Жыл бұрын
@@funkdoctor9663 Got a place in the Northeast called Pick n Pull . Just a giant junkyard you go to and you tell them the model car you're looking for and they tell you how many they have. You go find your car and take the part off
@caraccessories.tintstuff0125
3 жыл бұрын
Relly I like it
@NC0Q
3 жыл бұрын
VERY helpful video, thank you for making and posting this!
@eduardosalmeron526
2 жыл бұрын
The sunvisors keeps falling off what could it be? Any ideas plz hmu asap
@sk8allica1
3 жыл бұрын
you have to remove the center console from the car and put the front seats all the wa6y back , then you have the remove the headliner out of the front passenger door
@jaylopez9067
2 жыл бұрын
Why the console💀
@sk8allica1
2 жыл бұрын
@@jaylopez9067 Customers like professionalism, especially higer paying customers. If its your car you can try differently.
@ronaldmason8140
2 жыл бұрын
What kind of glue should l use and wheee do l get the material can l use anything l want to put up
@Istvan_F
Жыл бұрын
I have a version with roof airbags, and somehow the A-pillar is attached differently. It does not allow easy removal. Anyone any hint on how to do it without ruining the retention clip for the A-pillar? :\
@Lady_Zelda
Жыл бұрын
Can someone tell me how big the fabric needs to be? I've been searching the interwebs!!! Help a fellow Tampa resident!
@lourdesmacdonald8580
3 жыл бұрын
Just picked our car up from getting the headliner replaced and all warning lights are on. Did this happen to you? I noticed you replaced a fuse towards the end but I wasn't so clear why
@AdonayLopez
3 жыл бұрын
Yeah it blow a fuse for some reason. It was the one that controls the lights inside and the taillights
@eduardosalmeron526
2 жыл бұрын
@@AdonayLopez The sunvisors keeps falling off what could it be? Any ideas plz hmu asap
@ClaudiuB
2 жыл бұрын
Did u disconnected the negative terminal of the battery before working? Is it really necesarry to do that? I'd like not to, to avoid all that reset shit :D
@Sandokans
3 жыл бұрын
Hello nice work. What glue based on is ok?
@canadianstruggler
3 жыл бұрын
Bro you are doing really great stuff ...keep going you have long way to go ,I have question for you i have jetta too 2010 and i want a apple car play and rear camera on my car ,i m unable to find the proper radio for it please help me out
@AdonayLopez
3 жыл бұрын
Thanks man i apreciaste it! Here is the link on ebay for the new rcd360 with apple carplay this one will work with your car the only thing is that the procedure to install may change a little bit, hope this helps: www.ebay.com/itm/263226774215
@mohamed77224
3 жыл бұрын
Like he said rcd 330, i got one recently, I recommend the desay 187b, works like stock, easy instal and can literally be programmed by vw vcds, meaning even the car thinks its OEM
@Devilninja333
4 жыл бұрын
i would of changed to black but still awesome
@Devilninja333
4 жыл бұрын
also subscribed
@AdonayLopez
4 жыл бұрын
Thank you, i was thinking about it; but it was going to be a lot more work painting all the other gray part all over the car. Maybe on the next project. 👍🏼
@Devilninja333
4 жыл бұрын
Adonay Lopez Yeah you’re right I drive a TDi and it is also the same color but I’m gonna leave it as it is
@thismanjack8224
2 жыл бұрын
Looking for this forever
@user-xl5np5dp8n
Жыл бұрын
old guy guidance. give credit
@mohdhashim400
2 жыл бұрын
How to fit roof handle?
@blockg2256
3 жыл бұрын
This work for a 2018 vw with airbags on the side
@AdonayLopez
3 жыл бұрын
yes, just be careful not to damage the bags underneath
@blockg2256
3 жыл бұрын
@@AdonayLopez okay I’m taking my car to an upholstery shop to get done
@blockg2256
3 жыл бұрын
He charging me 400
@AdonayLopez
3 жыл бұрын
@@blockg2256 wow that’s a lot man, but he’ll probably do a pro job 👌🏼
@euggunduz4621
3 жыл бұрын
won't it come out of the trunk? I am thinking of doing this job this week.
@AdonayLopez
3 жыл бұрын
The opening is too small
@martinmtandi335
Жыл бұрын
Is it possible to use leather material for this?
@Brandon-tw2ru
8 ай бұрын
I hope you didn't, you're gonna make your car look like a BDSM dungeon.
@ugahenne
2 жыл бұрын
The video is generally good and helped me a lot taking the headliner off. Thanks for that. But if you look carefully at the end, there's all these dimples and creases, I bet in real life it doesn't look very good. And you know why? Because the golden rule of upholstery is: make as little contact to the material with your bare hands as possible. Hands are a bad upholstery tool: oily, greasy, pointy. @10:30 there's like 3-4 people tucking and pressing and adjusting... I cringed quite a bit at that. Also, it looks like way too much contact cement, especially the 2nd half, looked dripping wet, but hard to see for sure in the video.
@AdonayLopez
2 жыл бұрын
Thanks for the tip, as i mention on the video we are not pros and it was the first time we ever try doing upholstery. Stay safe.
@ugahenne
2 жыл бұрын
Adonay Lopez Yeah, no disrespect, and I used your video to take my headliner off flawlessy… you helped me a lot, thanks for that 😉
@ClaudiuB
2 жыл бұрын
Ok, saw that too, nothing is perfect :D but what tools do u recommend for that? Can I use the kitchen wooden tools for that which are pretty straight or curved???
@americanlunitic3834
2 жыл бұрын
@@ClaudiuB idk if you have done it yet since it has been 8 months since you have posted this. But if you haven't then I would recommend using plastic panel tools as to not crack or damage the plastic bits that you would be prying against, I've learned that when I switched my trim panels on my doors lol.
@checkengine5149
2 жыл бұрын
@@ClaudiuB Maybe way too late, but nevertheless. Just get an old (but clean) t-shirt, bend it several times, and be sure it is between your fingers and headliner when you make pressure onto it.
@fphfphfphfphfph
3 жыл бұрын
Where did you buy the fabric? the texture seems pretty similar but the color looks darker gray
@AdonayLopez
3 жыл бұрын
I bought it from a Fabric Place here in Tampa Florida and yeah its not 💯 but it works tho, …lol
@ThePassionjunkee
2 жыл бұрын
@@AdonayLopez youre in Tampa? Would you do my 2014 Touareg?!? I m in Palm Harbor.
@nanobano3258
3 жыл бұрын
How many yard of fabric it took from you to do just headliner?
@AdonayLopez
3 жыл бұрын
2 yards
@sk8allica1
3 жыл бұрын
According to the manual
@AdonayLopez
3 жыл бұрын
Thank you
@sk8allica1
3 жыл бұрын
@@AdonayLopez youre welcome
@carlingas666
3 жыл бұрын
Where can I buy the liner or can I reuse the old one if I clean it really good?
@AdonayLopez
3 жыл бұрын
The problem with the old one its that it lost the foam part that makes the fabric have thats volume and squishiness. You can go by your local fabric store, if you are in the USA you can go to Jo-Ann Fabrics.
@carlingas666
3 жыл бұрын
@@AdonayLopez I wanna see if I can really clean the fabric, remove that yellow foam. And try to reattach the old fabric. Your video was really helpful. I though the windshield needed to be removed in order to take out the ceiling panel. Now that i know it doesn’t, I’m going to give it a try.
@AdonayLopez
3 жыл бұрын
@@carlingas666 sounds good, let me know how it goes. 👍🏼
@ibrahembadran5672
3 жыл бұрын
💯💥💯💥💯
@hellotjesmellowtjes9791
3 жыл бұрын
Theres gotta be an easier way
@sanne_v
2 жыл бұрын
this looks like such a bitch of a job but you did it!!
@douglptards5815
2 жыл бұрын
how to not do that job hahahahahahahaha never use your hand or your fingers, make holes......
@scs2024
7 ай бұрын
Turn the stupid music off. How annoying!
@englishtea1057
2 жыл бұрын
Looks more like a Mark 7 than a Mark 6.
@user-pi5ed7mn4z
Жыл бұрын
Very, very many folds. This is poor quality work.
@AdonayLopez
Жыл бұрын
Video is indeed to teach you how to do it, not how good you can do it. If you professional work you would have to pay over $800 USD. The DIY project is under $100.
@user-pi5ed7mn4z
Жыл бұрын
@@AdonayLopez everything is the same, you can do it yourself, but qualitatively.
@mrwilliams7086
3 ай бұрын
@@AdonayLopezgreat video btw I get what you're doing and of course it's a trial and error thing screw the haters 👏🏾👏🏾 hell you just gave me confidence 😅
Пікірлер: 96