I just bought this (April 18th 2023) superbeast on batteryhookup for $244. What a great deal. Thanks for showing me Jerry 👍
@marcusshumaker2786
Жыл бұрын
Did you leave it like it came assembled and let have you had any problems putting a balancer on it
@1ohmwrecker
2 жыл бұрын
Wish I would have done that. I paid $400+ for 36 of them. I'm making a 64ah bank. But with this you get all the bus bars n stuff too.
@kswis
2 жыл бұрын
Fun stuff! Ive spent a little $ on headways. Theyre decent cells. Def cheap. I built a couple 64 ah packs quit a ways back, I kept getting 20-40 cells here and there, then ordered 4 of the beast module hardware kit where just the busbars and cell holders came. Before the cold part of winter hit I had a little over 250 ah. Built a cool little enclosure with push and pull fans active balancers ect. Still have 2 decent sized agms and a 630 farad ultracap. I'll end up getting a heater before long so I can leave it the way it was. But with one synergy wfo 3k I'm still at 150.7. Just not the same
@cobra4439
2 жыл бұрын
Batteryhookup is the absolute sauce
@stevemaniaci4750
2 жыл бұрын
Nice deal go with it . im learning alot . thank jerry
@gavinmcclure8047
2 жыл бұрын
Your the man ! Thank you for this information 👏
@anubisprince36
2 жыл бұрын
6-8k per 48ah bank with a decent 200a alt.
@Widowmaker2828
2 жыл бұрын
Pretty cool 😎
@mikehoncho5360
2 жыл бұрын
Great videos man! I’ve been watching your channel almost everyday for a while now and I’ve gotta say you’ve played a major role in my car audio adventures. I’ve got a few questions to ask you concerning my new build. I’ve got 3 super beast headway modules on the way (144 cells) and I’m wondering what size bms would be best for a 96 cell 12v bank. As well as a 48 cell 12v bank. Will I even need a bms? Or just a balancer and battery monitor? Also I have a single 160amp alternator to charge the 48 cell bank. Will that be enough? Or should I mount a 2nd 160amp alternator dedicated to just charging the lithium bank? Is there a safe way to build a dual alternator bracket? Thanks man! And keep up the videos!
@geraldeverette4245
Жыл бұрын
I just bought 24 from them $5 each can not beat them
@ogairbender808
2 жыл бұрын
Same thing I'm running
@brian6029
Жыл бұрын
I was wondering about setting them up the long way. Is there a part 2 follow up vid for that?
@petertowers9579
5 ай бұрын
Yo Jerry do you sell any banks made already?
@tonyfoley9988
Жыл бұрын
Did you remove the solder from the cells? On my superbeast battery I've got 3 cells where they soldered some wires on the battery where the red wrap is located. I'm just wondering how do I get the solder off of the cells and would appreciate any advice.
@evolve2survive324
2 жыл бұрын
how old were the cells you got ? did you encounter any issues at all ? how long did they take to arrive from the point of ordering ?
@JerryAintloud
2 жыл бұрын
cells were 11-2019 got them in a week and no issues
@drfoulcheesevirus
Жыл бұрын
Hey Jerry, I bought a superbeast before I realized their max charging voltage is 14.6v for a 12v configuration. My alternator from auto tech engineering is set at 14.8v. Do you think they will degrade quickly by charging them at 14.8?
@GTILOUD
Жыл бұрын
🔥
@drfoulcheesevirus
Жыл бұрын
@@GTILOUD 🤣 I was worried a bit but I've been running it at 14.8 for over 6 months and haven't noticed any degradation of the battery or anything. Cells all rest same voltage and everything. 👍
@Gabriela-ge7bx
Жыл бұрын
@@drfoulcheesevirus can they used for e-bike?
@GTILOUD
10 ай бұрын
@@drfoulcheesevirusthat's awesome dude makes me lean more towards them over the 10ah prismatic lto they need over 15v was gonna go that route & ho alt @ 15.5v but don't wanna fudge all the cars electronics. There supposed to be max 3.6v so 14.4v but if you've been fine at 14.8v maybe voltage drop accounts for that.
@GTILOUD
10 ай бұрын
@@Gabriela-ge7bxyes if you can configure to proper voltage for the bike.
@jztabasco
2 жыл бұрын
I bought 2 of them and want to run all 96 cells I figured I could run six across and 12 down would that work any suggestions by the way I love your shit box bro and do you think these would be enough to run three taramp 8k
@kgsalvage6306
2 жыл бұрын
Were there just studs between each half of the module connecting the cells together?
@JerryAintloud
2 жыл бұрын
yup
@koss843
2 жыл бұрын
👍🏿
@ROBBG88
2 жыл бұрын
So can these do ok if I charge at 14.8 n if I put these in my vehicle do I remove the agm upfront or leave it
@GTILOUD
10 ай бұрын
No max xharge is 14.6 cells will degrade with higher voltage
@Richtaco
2 жыл бұрын
I have no idea how to set up lithium. Zero
@cristovalmontoya5222
2 жыл бұрын
Could of you used the holders it came with as handles for 24 cells
Пікірлер: 39