Programing your Heal Tech quick shifter with an Android cell phone is easy. The second test ride has Good results. Part#3 www.healtech-electronics.com/...
Awesome.e review my man when downshifting do you still need to be on the throttle ? Or can you just let go and gear down
@ADRRUSH
Жыл бұрын
You can still be on the throttle when downshifting.
@michaelfactor7518
2 жыл бұрын
🔥❤️
@jj-tq4hx
2 жыл бұрын
Great review on this great shifter. I am not mechanically inclined and took to a local mechanic and he had no idea how to install It. Seems to be fairly straightforward but cannot find anyone to install it.😒
@ADRRUSH
2 жыл бұрын
It's easy to install. You should be able to install it your self.
@jj-tq4hx
2 жыл бұрын
@@ADRRUSH ok thanks. Will try to tackle this myself.
@ADRRUSH
2 жыл бұрын
If you have any question let me know and i will do my best to give you an answer .
@jj-tq4hx
2 жыл бұрын
@@ADRRUSH Thanks sir..will do!
@terrancemcfarland89
2 ай бұрын
@@jj-tq4hxjust make sure depending on your bike it'll either be coil pack plugs tie in or fuel injector plugs tie in, I made the mistake of only plugging in one not realizing I had to tie into both
@903assengsxr7
2 жыл бұрын
Just remember it’s only for upshifts you will destroy the tranny going down so now you going proper direction fine tune the kill times so you lose less rpms between shifts with keeping it smooth
@ADRRUSH
2 жыл бұрын
Thanks for the tips brother.
@903assengsxr7
2 жыл бұрын
@@ADRRUSH well they don’t really explain all that but it’s designed so you can run gp shift or standard so it makes you think hey I can QS while going down also because there’s settings for it I thought the same thing myself at first but you gotta have the autoblip to do it safely so mine is setup for gp shift so I turn up shifting off so once you get it dailed in good rerun against that R6 in prev vid and show everyone the diff because a clutch shift or bump shift still can’t top a QS frfr enjoy and y’all stay safe
@austin5920
2 жыл бұрын
@@903assengsxr7 It will not destroy your trans. It needs a little "help" with some light throttle but it's perfectly safe.
@903assengsxr7
2 жыл бұрын
@@austin5920 wrong lol you need a autoblip and since our bikes aren’t drive by wire it cost a arm n leg lol but proceed lol yes you can setup gp shift but going reverse is a nogo
@marcz1341
Жыл бұрын
The way you installed it now, on top of the shifter linkage, its usable for downshifts also. Mount it a bit lower, on top of the straight 'bar', and its for upshifts only
@crow.-1518
2 жыл бұрын
Did you get the sensitivity where it doesn't go off by accidentally touching the Shifter? I've got custom 650$ fairings on the way and a bunch of carbon parts for my 2016 gsxr600 and am thinking about adding a quickshifter for fun. If so, how would you say it is as far as installation, user compatibility, etc. Love the sound of the bike and quickshifter setup you have.
@ADRRUSH
2 жыл бұрын
Yes, i adjusted the sensitivity. As soon as you install the quick shifter you need to calibrated to your bike. It works good now. Installation was fairly easy, and compatibility is good.
@crow.-1518
2 жыл бұрын
@@ADRRUSH awesome. Thanks for the answers. Prolly buy one later tonight when I get off work.
@crow.-1518
2 жыл бұрын
@@ADRRUSH one more question my dumb self forgot to ask.. did you need new rear sets? Adjustable ones or did stock sets work fine?
@ADRRUSH
2 жыл бұрын
@@crow.-1518 the stock rear sets work fine. No need to buy rear sets
@ADRRUSH
2 жыл бұрын
Did you buy the quick shifter yet? Because i just did a video on a new quick shifter? And I'm really liking it.
@peytonhibdon7659
Жыл бұрын
I'm I correct in assuming you can't select cut time in individual gears with this unit?
@ADRRUSH
Жыл бұрын
You can adjust cut time with this shifter. Just not by RPM. It's a excellent shifter for the price range
@SKR_Racing
5 ай бұрын
I installed one on my bike but I can’t get it to connect to my phone I’ve tried both apps Bluetooth and WiFi and it hasn’t been working so I can’t connect to proceed with set up got any advice ?
@ADRRUSH
5 ай бұрын
I didn't have that issue. Definitely contact the manufacturer or the distributor
@TALEX-07
Жыл бұрын
Is there somebody who can help me to fine tune the sensor and the cutoff times, because I fill like the shifter its a little to hard, when I want to shift…
@ADRRUSH
Жыл бұрын
Set your sensor cut off to 55 and test it. If you feel that you need more increase the number to 60 and test that.
@Daniel-qx9nq
Жыл бұрын
After having it a year would u recommend getting it still? I'm on the fence about it
@ADRRUSH
Жыл бұрын
No I don't recommend. Watch my other videos on this product.
@Daniel-qx9nq
Жыл бұрын
@ADR RUSH I'm watching them rite now actually. U wouldn't recommend either the healtech or annitory?
@ADRRUSH
Жыл бұрын
Check out the annitori
@markburroughs99
Жыл бұрын
no power loss from heal tec . keep foot off shifter. remap too
@ADRRUSH
11 ай бұрын
Oh trust me I kept my foot off the shifter. Like I said in the video. I might've got a bad one.
@sanumahomed6391
Жыл бұрын
Hi, I installed on mine, did everything, but sometimes when driving it cuts of the ignition, any advice?
@ADRRUSH
Жыл бұрын
Your sensitivity level might be too high.
@sanumahomed6391
Жыл бұрын
@@ADRRUSH it's on 20
@ADRRUSH
Жыл бұрын
@@sanumahomed6391 make sure the screw on your sensor is not too tight.
@sanumahomed6391
Жыл бұрын
@@ADRRUSH ok thank u
@sanumahomed6391
Жыл бұрын
So I activated the noise filtering problem was solved, everything was working perfectly. On the way back stopped working, shifts became hard all of the sudden, and would only change at really high rpm, so confused I didn't change anything for that to happen.
Пікірлер: 48