Thanks Chris for a real great video. Why I say this is because I am just shy of 80 and I did many things that you are doing at your age now. Straps, chains and binders and loading and unloading, when working on the CN railway here in Ontario Canada. Jumping up and down off flat beds and trucks it was a great life but now things have gotten much slower as it will with you. Love your videos. Keep your health and enjoy life.
@kengarlin1134
5 жыл бұрын
"Officer Hoover will never see this" cracked me up
@DC9Douglas
5 жыл бұрын
Someone has been watching "Truck and Trailer Tuesday" on Tractor Time with Tim's page lol
@officerhoover7562
5 жыл бұрын
I love finding those!!!
@toddreynolds8875
5 жыл бұрын
Watch out letsdig officer Hoover heard that air leak from 5 states away
@welderboy525
5 жыл бұрын
Douglas DC-9 or dirt perfect. He’s actually good friends with Hoover
@andysukosd8177
3 жыл бұрын
Never a dull moment, great videos. I am hooked on your channel. Thank you for sharing.
@bigdawg1944
5 жыл бұрын
I found this video to be very moving. Great job Chris.
@scottgee5689
4 жыл бұрын
Yes it was a "moving' experience
@treeclimbing7798
5 жыл бұрын
Yer poor cameraman, kudos for not falling off on the ride in. He deserves a raise.
@7884mac
5 жыл бұрын
That cupped tire wear pattern is indicative of a toe-in or toe-out condition. The axle may have been bent at some point.
@corpnut2906
5 жыл бұрын
My experience with that cupping is tire drag on too tight of turn my trailer I pull is a 48’ conastoga with the tandems set all the way to the rear happens a lot along with a light trailer and having to use brakes hard makes it bounce along with the other issues others have said
@waynetharp
5 жыл бұрын
You are such a good Nephew...Keeping the boss mans ride up to par while he is relaxing!😁 I saw some happy cows also...
@CRQ5508
5 жыл бұрын
I had a tire wear out like that on my RGN. Replaced it, and it’s replacement wore like that again. Had the entire axle taken apart and found the axle bushings were worn down. I had done all the standard checks and adjustments made before taking the axle apart, such as pressure checks, alignment, balancing, checking of suspension components, etc.
@eliteearthworksllc
5 жыл бұрын
Nice job! Always something to work on. Makes for a long day moving equipment! 👍🏻
@Dontworryboutit315
5 жыл бұрын
Might as well bring the 220 and 250, get the whole family involved
@melissadyche8325
3 жыл бұрын
😂 sounds like the plan
@johnapel2856
5 жыл бұрын
Rock & roll. I get it. It's like a joke. 😨 This was an interesting video. No one shows this part of the job very often. Thanks.
@randallsmith5067
5 жыл бұрын
Glad to hear Tim's voice he's a up and comer
@GoBlue79
2 жыл бұрын
When you said "put the hammer down," damn, that Kenworth T880 can really tear up the asphalt!
@clintonemmert5184
5 жыл бұрын
Good job on backing up there Chris. Lot truck drivers can go up and down the highway all day, but can’t back the truck and trailer up worth crap. 🇺🇸🇺🇸🇺🇸
@machinemoverman4614
5 жыл бұрын
Clinton Emmert I used to haul bridge beams, I have backed a mile or two. I tell the young guys, I’ve backed more miles than you drove forward. Lol
@delcasaleexcavating9508
5 жыл бұрын
I tell all the kids in our volunteer FD who wanna be"driver's" you'd have to drive better in reverse using the mirrors ONLY & no sticking your head out the driver's side window in order to "pass" my driving class ! And 99% of them fail miserably. Go set up traffic cones in a parking lot and practice until you can back up and not hit any cones !!! That's how I learned when I got my articulated license before it was a CDL
@nemo227
5 жыл бұрын
I may have it figured out. When your uncle notices wear on the tires he schedules an out of town trip so you end up changing the tires. It appears innocent enough . . .
@stephenkeefer3436
5 жыл бұрын
Holy smoke! That truck has more gauges than some airplanes I’ve been in! . Really wise of ya to check out your rig before you got a load on. I didn’t know those ramps had springs on em. I just thought you were really strong.💪
@phillipbonner5215
5 жыл бұрын
You must have engaged the flux capacitor to make that Kenworth go that fast. LOL
@ethanmiles1428
5 жыл бұрын
it must have run out of Pepsi and bananas when he turned lol
@nellermann
5 жыл бұрын
Your attitude during adversary is commendable! I work in a totally different industry, but hit similar snags daily with our operations and I struggle to maintain composure and happy or neutral disposition. You are my new inspiration!
@toddreynolds8875
5 жыл бұрын
Lol. The filter fabric Creeper. We do the same thing
@davidcrane3734
5 жыл бұрын
I don't usually comment because I watch on my TV but had to comment on this one. I thoroughly enjoy all your videos but particularly the ones when you're driving through that beautiful NC country-side. I had to move from NC here to the Dallas Texas area over 30 years ago for my job and have missed it every single day since. I do get back once a year for a couple of weeks to visit my daughter in Cary but cry all the way home when we leave. Keep up the good work.
@chax2004
3 жыл бұрын
Those roads look so smooth, no potholes.
@DirtPerfect
5 жыл бұрын
good job on pre trip hoover would be pround
@dewainwoodard4840
5 жыл бұрын
The roller sounds a lot better thanks for sharing Chris have a great day and stay safe out there
@brucethec8150
5 жыл бұрын
Quick to change a outside tire. Put a 2x4 under the inside tire drive up on it.
@clydeacor1911
5 жыл бұрын
That really only works on a Budd type wheel when you have both outer and inner lug nuts.
@keithdunlap2701
5 жыл бұрын
Man, That New Skid Steer almost sounds like it's electric, it's so quiet.....That's a nice machine..... Another Great one Chris !! Thanks for sharing.... Have a Great Evening !!
@brinkme1772
5 жыл бұрын
Officer Hoover may catch that ABS light though ;)
@EvryThingAUTOMOTIVE
5 жыл бұрын
After watching your videos for about 3 years now, I've decided that I want to quit my job, move to N.C. and work for you guys. Never seems to be a dull moment with yalls sense of humor.
@mjlmbl
5 жыл бұрын
You throw them chains like a pro. Your uncle may just have you do it fromnow on.
@brianwebber7168
5 жыл бұрын
No wonder your uncle skipped town. Good job driver👍
@FishFind3000
5 жыл бұрын
He just didn’t wanna get his hands dirty.
@harvey50ok
5 жыл бұрын
Check the alignment on your trailer axles,could be your tire problem.
@maineman11
5 жыл бұрын
It's not an axle alignment issue like others are saying, as the inside tire and the tires on the opposite side would look the same. Likely a bent wheel.
@AntoniEmanuel7328
3 жыл бұрын
Great video. Looks similar to the English country side on a sunny summers day.
@lumberjaketreeservicellc4002
5 жыл бұрын
I enjoyed the ride on the road grader at mach speed on the back of the trailer. That dump truck is a thing of beauty. Me likey
@writerslifewithauthortruma5370
5 жыл бұрын
FYI the rim was bent so it chewed seen it many times, being on the outside and front probibly hit a curb or hole while loaded. Hope this helps.
@dcrahn
5 жыл бұрын
Warp drive works good on that dump truck!
@oz1vlh
5 жыл бұрын
Falling out off too as seen at the intersection. Very good.
@Drakeziel
5 жыл бұрын
I really want a trailer similar to that one! Goodness!
@kerrydagge4397
4 жыл бұрын
Love your sense of humour. I would rock'n'roll with you any day.
@hydraulic-hum
Жыл бұрын
beautiful countryside through your part of NC..
@modkartracer3358
5 жыл бұрын
Ole Timmy don’t get in a hurry, he wouldn’t last a day working for me...lol Great job as always Chris!!!!!
@adavazquez3378
4 жыл бұрын
I watch you work and maneuver those haevy duty machine's, let me tell you do an excellent job, your helper is good worker...
@Dirtmonkey
5 жыл бұрын
Interesting video, thanks for posting !
@nedflora1154
5 жыл бұрын
Nice set up with the truck and trailer. We have a '17 Pete set up real similar would be nice to a tri axle trailer though. Love that automatic Allison too
@gliderider7077
5 жыл бұрын
All you’re missing with that roller and skid loader behind the quad, is a half load of cold mix asphalt and an elderly victim 😂. #gypsypavers
@ccraig4247
5 жыл бұрын
Gliderider “We just paved your neighbors driveway up the street....”
@uggy7
5 жыл бұрын
Thanks for sharing Chris.👍👍🇵🇪🐕❤️
@yt650
5 жыл бұрын
Where are possible and legal a fitting is made called a “push to connect” There are a number of different types obviously metric and SAE and you want the ones if legal in your state that have DOT on them. Instead of fooling around with ferrules and nuts, just wipe the tubing off and stick it in the fitting and the O-ring seals it and the fingers grip it. A little lubrication in the form of petroleum jelly, dish soap or oil in a very slight amount of either on the tubing and it pushes in perfect. The tubing is removable follow the directions. Fast and easy. And assortment of sizes that you use for your tubing for air brakes will get you rolling quickly. If the tubing allows you could cut the bad section out and put a repair connector in between and it probably would take two minutes. I have considered that you may know about this already but if you don’t it’s just something to help you. 60% of all hose and tubing failures are from rubbing.
@davestinson5691
5 жыл бұрын
Man that's a nice,well kept up place ur working. Really like the content in this 1 man
@donbraden8533
5 жыл бұрын
Yep you an definitely give yourself a PROFESSIONAL status on heavy equipment relocation specialist nice job boss man 😎👍👍
@Naviss
5 жыл бұрын
Ears bleeding after that time lapse.... Ouch. Thinking it's all over, Turns volume back up. *Truck makes turn* Ears bleed again.. GG You got me. Sexy T880 though. ;)
@thomasmccourt215
5 жыл бұрын
Strange how the motor-grader sat for months doing sod all and recently it has been a required piece of equipment . Says a lot for your maintenance that when you need them they are available (although you did put a fair amount of work into the old girl) Also when did Jim change his name to John
@Blossom_Chops
Жыл бұрын
I LOVE the banter between u 2 JQ x 🇬🇧
@demandred1957
5 жыл бұрын
Axles on your trailer might not be parallel
@Crappiestalker
5 жыл бұрын
Nothing more then a pain in the ass to move equipment all day do it everyday. Glad I retired from operator to a truck driver tho I miss running equipment. I feel your pain on changing a tire and you got to have good rubber under ya. Good video
@janvandenbos7085
5 жыл бұрын
Wow much equipment to move Chris and Tim , tyre problem and brake airline busted....busy day...✌👌😎
@thomasdentler8383
5 жыл бұрын
Just ask Milwaukee for one of them cotontop3 deals!! 😂
@jamesbond9873
5 жыл бұрын
Love the mini grader.
@mitsarp
5 жыл бұрын
A little bit of shoulder on those paved roads wouldn’t hurt.
@jonathanhanmer1760
5 жыл бұрын
Fastest dump truck in n.c. lol.
@HughzieTube
5 жыл бұрын
Always an interesting camera angle that trailer load POV. Make sure you leave the job of getting the tyre changed for John when he gets back.
@JDSWeather
5 жыл бұрын
Chris You'd make an excellent spokesperson for Milwaukee Tools
@stefanaxelsson513
5 жыл бұрын
You have a beutiful farm Chris...
@gl309495
5 жыл бұрын
was that an EMU in the pen next to the ducks??!
@ScottTheMarine
5 жыл бұрын
Am I the only one that thought he should have put Eastbound & Down on while rolling down the road? 😁
@rogertallentire2961
5 жыл бұрын
No rock today. Just roll. er! See what tomorrow brings. All good.
@larryehrlich8702
5 жыл бұрын
If you are going to be off by 5 pounds on your air pressure...then always be off 5 pounds high...never low. Why? With low air pressure the side walls are flexing alot. Flexing causes heat and heat leads to blowouts. If you are 5 pounds over pressure, then the center tread will slightly more. Always be at or overinflated!
@floydfarms1578
5 жыл бұрын
I think there was an air leak near the camera for the trip with the grader lol! Great video on proper Pretrip check and loading and tie down.
@williamkelley7654
5 жыл бұрын
Be careful with the turbo button on that dumptruck, you were holding it for a bit long.....
@TrailTrackers
5 жыл бұрын
Install valve extenders and you won't have any more problems airing up those inside tires. Just sayin'. ;-) edit: I know you and John like to save money where you can, not unlike any of us really. But I'm warning you now. If you keep lifting up those heavy ass'd ramps like you do, you're gonna be all stove up like I am when you're 55; like I am. For the love of God man get a trailer with a ramp (or ramps) that fold themselves up. You'll thank me when you're older.
@letsdig18
5 жыл бұрын
That's on the list for the next trailer lol
@kevincosgrove4147
5 жыл бұрын
Most of the time those tires wear like that do to low tire pressure also 2 different tires will make a fund wear and that impact is awesome I have 3 1 in each service truck and 1 in the shop
@wayoutwest4944
5 жыл бұрын
Check with Cotontop3, Milwaukee and Huskvarna give him all kinds of stuff. He has been wearing a Huskvarna sawing suit that looks like it would make a good space suit. I reckon they gave it to him.
@barkleygentry2504
5 жыл бұрын
Don't get to see many equipment hauling vidjas from you. Thanks!
@HDWRIGHT409
5 жыл бұрын
We don't get to see her much but damn I love that dump truck it's badass looking.
@sandy1653
5 жыл бұрын
Y'all ain't had that truck all that long, have you? I'm surprised it's rubbed through like that already.
@carlwilliams8354
5 жыл бұрын
When ever we sent a truck to pick up the lowboy and move something quickly we would send a helper with him. Usually had a tire to change first.
@michaelkoop6731
3 жыл бұрын
Love that jack u used. At least u worked smarter and not harder on that. Why wasn't that safety chains hooked up the right way?
@jasonking2943
5 жыл бұрын
David's duck have gotten big! So how much do you charge for a job ? ......minus the repairs on equipment. Payments on trucks, equipment and trailers, fuel, time to move equipment, travel time, wear on equipment, insurance, permits, salaries, oil and lube, let's not forget about taxes ...alot of folks say wow 100,000 or 200,000 for one job. While that sounds like alot of money and it is but most fail to remember all the expenses that are paid OUT for what is brought IN.
@gandjboyd7872
5 жыл бұрын
I bought my 2nd truck a 99 T-600 from MHC Dallas
@charlesgall8052
4 жыл бұрын
You need a "GOPRO HAT", for hands free filming !!!
@FishFind3000
5 жыл бұрын
14:30 I heard no backup alarm. It’s about time.
@glendafranz8090
5 жыл бұрын
Love your new jack.
@MrEst1953
4 жыл бұрын
Extension for inside valves are available and work ..
@fordsure
5 жыл бұрын
Cute trailer, just missing the horses....
@Kurgosh1
5 жыл бұрын
That's a really expensive jack.
@matthewsharp6597
4 жыл бұрын
3:10, Chris laying around on the job again.
@davidharris6581
5 жыл бұрын
Looks like I am behind a few videos on the farm. Had not seen the new fence and corral. When do we get a closer tour?
@arizonajames6131
5 жыл бұрын
Just pulling your chain. We know the BIG DEAL works alot
@leol1682
5 жыл бұрын
Enjoy the video Chris like it and good trucking man .
@LiLGooZ21
5 жыл бұрын
Track it and Pack it is what you were going for I think lol...
@bosshogg6030
5 жыл бұрын
Another great and amazing video 👍🏻
@hotrodhog2170
5 жыл бұрын
Was that the maid pulling up to the house at the end? You have a brake light out on the dump truck also. Officer Hoover will find that one though.
@Todd.Roberts
5 жыл бұрын
Well at least the side wall of that tire was better than the one on my trailer lol
@mirage4014
5 жыл бұрын
Hi everyone, from Germany , Chris is early today its still Thursday Just
@kalegorskey9192
5 жыл бұрын
Julian smith still Thursday in the U.S too but just afternoon
@mirage4014
5 жыл бұрын
@@kalegorskey9192 , Hi Kale , good afternoon to you, Now Friday here so good morning from here
@Big_John_C
5 жыл бұрын
And that's why all of my guys have Class A CDL's, they each get to haul equipment as well as run it, and I save money by not having to hire a designated truck driver to haul everything
@soldierofdirt81
5 жыл бұрын
You sound like one of the better outfits. The second a potential employer sees a Class A license, that's where they bend you over every day of the week
@Big_John_C
5 жыл бұрын
@@soldierofdirt81 We take care of our people, without them we wouldn't be successful. I drove truck for 20 years so I know exactly what your talking about.
@kb7722
5 жыл бұрын
Blaster should send you some products too!
@hughgautier3894
2 жыл бұрын
Want a lazy man's way of making sure you are backing up in a straight line with your ramps. Paint a White Line down the driver's side of the trailer. So when you drive up you keep the wheels on the line, backing up will be going backwards on the line. I don't recommend you back up the vehicle onto the trailer unless you are a professional. On that skid-steer, you could have turned it around on the trailer and driven straight off.
@terrycannon570
5 жыл бұрын
Talk to Jay Paydirt about the tires wearing. He has a solution.
@ngnmech
5 жыл бұрын
May be due to tire scrubbing when turning. All multi axle trailers scrub the tires when turning, so that wear pattern may be just normal on that axle.
@idadho
5 жыл бұрын
Do you try to match tire diameter/circumference? Mismatched tire sets will scuff the smaller tire.
@brucebannerman6848
4 жыл бұрын
Looked good to me, but, some places it is wrong to display wide load sign without a wide load,also tie down chains should not be the widest part of the trailer.
@122yamaharider
5 жыл бұрын
On account of your lobster red shorts tan line id say you guys are getting the Sun us Northerners had last spring and were getting the rain yall had last spring?
@thejmoneyshow
5 жыл бұрын
my life has been repairs recently, haha - always a joy also, I need to find a partner like you have
Пікірлер: 220