Good job guys.. I was highly discouraged on buying an featureless AR this tool has put faith back into Cali guns 👌👌🔥🔥
@jacobme7217
4 жыл бұрын
Ryan Zuill I’m confused so can I buy any ar 15 fixed mag and install this or do I have to buy it already assembled or is it only to convert it from the bulletbutten assault weapon thing
@oyster_ditch
3 жыл бұрын
somebody please answer this guy👆👆👆 I wanna know too...
@bambambooyaaj6239
2 жыл бұрын
@@oyster_ditch This is a conversion kit. It comes with all the tools necessary that you can install yourself at home. You don't need an AR-15 fixed mag as this comes with necessary parts to lock the mag when the upper is locked in place. Basically you can buy a regular or have a compliant AR-15 and just buy this conversion kit and you are all set to go after installation.
@oyster_ditch
2 жыл бұрын
@@bambambooyaaj6239 hell yeah thanks for the response man. I ended up getting my first ar 15 this month and installed the kit. Literally about to go to the range. 🤘🤘🤘
@dsgmc08
6 жыл бұрын
Pretty damn clever. All the positives of another company's take on the rear takedown pin with the addition of the upper limiting stop. I just picked one up from Turner's for my AR. Nice job, JTac.
@pitbull62
5 жыл бұрын
are you saying once you engage the take down pin the drop of the upper is limited? does armaglock also limit the drop?
@ozzy_6779
5 жыл бұрын
@@PDIcomics lmao what are we supposed to do? We have fought the dems for years and hvnt gotten anywhere. What do you suggest since your such a fucking badass comic book reader.
@rickeyryan303
5 жыл бұрын
@@PDIcomics fuck for whites, really..
@BlazinSD
4 жыл бұрын
@@PDIcomics ur dumb.
@gary6032
4 жыл бұрын
@@PDIcomics brain dead
@ReclaimYourMind
3 жыл бұрын
only thing that sucks about this is that the upper release button doesn't work unless the bolt is forward. so when you fire your last round, you have to release the bolt forward over an empty mag in order to release the upper and be able to reload. much better than the alternative but still something to note; we know how annoying it can be to release a bolt or slide on an empty mag; kind of a pain.
@t77snapshot
6 жыл бұрын
No milling of the lower receiver is the big win here.
@GabrielMartinez-pw6pu
5 жыл бұрын
Juggernaut BABY!!!! I just purchased a beautiful Ruger AR 556 yesterday BECAUSE of this new Juggernaut Kit!!❤❤
@TheSeanfromla
6 жыл бұрын
Just placed a order can't wait 2 try it out awesome looking product once again 😁😁
@Builtaroundnature
4 жыл бұрын
Bought this a year and a half ago. After a few trips to the range about 3K rounds it’s still good. Thanks.
@hopatrol9475
2 жыл бұрын
How have you dealt with jams and double feeds? What mags have you used?
@lilbirdviews7148
5 жыл бұрын
Heads up..If you have a bullet button you have to buy a regular mag release button with spring
@lowkey530Ncal
4 жыл бұрын
I hate living in cali when it comes to buying guns. But this is bad ass to say the least. Great job and ill definitely be getting my rifle soon with your juggernaut kit.
@s4alexis
6 жыл бұрын
Just installed it. Its not bad. My rifle doesnt seem to like to close the action by a good tap on the front. Half the time it leaves the upper ALMOST closed. I usually have to tap the top of the rear sight since I use optics.
@strykeback1
6 жыл бұрын
First time I've seen this one. I was thinking of registering my bullet buttoned pistols but that looked slick plus I liked that it didn't flop forward like some models!
@ManVsChip
6 жыл бұрын
You can't register AR pistols as AW anymore. Your only option for pistols is to mag lock them. I've got three (dros'd one yesterday) and theyre all going to have to be mag locked.
@strykeback1
6 жыл бұрын
ric moon even if you had them years ago made out of 80%s? Granted seeing this new option while expensive will be way nicer than the bullet buttons they have. Just that I paid a premium for last round hold open.
@ManVsChip
6 жыл бұрын
strykeback1 I’m not an FFL, but the two I asked about this yesterday both confirmed it. Assuming that means your 80%s as well, probably even more restricted. I think there’s a cutoff date for registering those too.
@brianespinoza4835
6 жыл бұрын
If they were purchased before Dec 31, 2016 you have until July of 2017 to register them as AW.
@Han-ws8he
5 ай бұрын
One of the combersome issues are the location of the bolt when open the upper. Upper won't be open until bolt is forward to the chamber. Also, magazine (with ammunition) insertion is difficult due to the bolt. So the bolt needs to be back to the tube. Another trouble is when double feed happens. The upper won't open (due to bolt) nor the magazine (due to upper). It's very frustrated moment. The only way to solve the issue is opening upper by front pin. This needs some practice when time is running at the range since you've got live rounds in the chamber with stuck magazine. Tried the long nose plier to take out the double fed round and turns out not that simple. Also the bolt is somewhere middle or back, you'd need to be careful. The bolt could accidentally move forward right after stuck round taken out and fire the live one while holding gun on side. And double feed generally damage the shell. So firing damaged round could be catastrophic. You should know what you're doing and don't get frustrated but take your time.
@ozzymendoza4350
6 жыл бұрын
You guys need a vid shooting with the Hellfighter
@MrCaptCalzone
6 жыл бұрын
has anyone had the experience of their bolt marring their follower after the last round? I am having this issue with hex-mags.
@macross7k
5 жыл бұрын
Are you sure? Pistol grip, adjustable stock, reinstall a mil-spec magazine release, are all allowed? And a forward grip?! This is too good to be true!!
@fastm3980
5 жыл бұрын
It's true
@svarodzic
4 жыл бұрын
It’s because people who write anti-gun laws have no fucking clue what they are doing...
@XxTournaquetxX
3 жыл бұрын
My solution to the AR restrictions was moving out of CA. Haven't looked back since.
@tylerjay532
3 жыл бұрын
im doing the same, phuck these concessions. phuck listening to these corrupt criminal politicians. When will we stop and say no. It so pathetic to see people in the comments cheering on this abortion of our rights. Hurr durr this isnt so bad, at least i can still shoot my cuckgun
@reglus15
4 жыл бұрын
I just bought my kit but I have a question. I remember the last round that comes out of the ejection port, does your bcg stays open? The reason why I ask was because earlier today, I just realized that it was hard to remove my mag unless i break it open.
@nomatterwhat6404
6 жыл бұрын
What magazines for the most part work with your product....10 rd pmag did not work would not let bolt close
@jeejay98
6 жыл бұрын
How far does the upper receiver lift from the lower receiver on the takedown pin side?
@JayJay-qi9pk
2 жыл бұрын
Fun until you get a malfunction like double feed or failure to eject and then clearing the malfunction means tearing the whole thing apart
@hfreeman330
4 жыл бұрын
Does this put extra stress on the lower receiver front pin? What about polymer lowers? Thanks.
@jman1057
3 жыл бұрын
My upper doesn't fall open as stated in your video. I have to do an additional separation to create the opening needed for the magazine to release. Also I cant tap the tip of the barrel to close as stated in the video. To close I need to squeeze the upper closed with my hand. I guess my rifle is very stiff. Can you help, how do I get my rifle to work as yours in the video?
@MrProfit420
2 жыл бұрын
How does the system keep the upper from falling due to the weight of barrel and hand guard and crushing your fingers during engagement?
@kalvin1123
3 жыл бұрын
Will this work on a magazine fed shotgun? Specifically the Typhoon Defense f12?
@liquid7315
3 жыл бұрын
Question : what model AR is this on video ? I recently bought jte 15, when I charge handle after reloading a new mag, the bolt stays locked , so to fire I have to send bolt home... how come the bolt does not stay locked on this rifle after he charges handle ?
@nomatterwhat6404
6 жыл бұрын
So i was using your product and I had the bolt lock back on mag to bad theres no release for the bolt
@jmartinez1008
5 жыл бұрын
Just picked up 2 from turners.
@salvadizzle_696
2 жыл бұрын
Will I be able to use a higher round magazine as well? Such as the one in the video.
@jimmycchong200
6 жыл бұрын
What a good mag release button to get?
@ryanholland2605
4 жыл бұрын
How do you send the bolt home as yet reloading?
@DarkAngleProduct
4 жыл бұрын
What does that mean for the barrel length? Does this mod allow us to go with barrels shorter than 16"?
@slowstihatch677
5 жыл бұрын
Very nice! At 1:25, what is that black plate thing with the USA and US flag etch that dropped?
@MikeDMinor
2 жыл бұрын
That is the dust cover.
@my40calbangz19
Жыл бұрын
Just purchased this kit, it hasent came in yet but i realized that i lose the bolt catch, and since they only do returns for store credit im looking to sell this as soon as i get it. If u want it let me know, im in nor cal i can ship it to u
@coltbenbow5830
4 жыл бұрын
How do you take it apart to clean it
@billybob9961
6 жыл бұрын
Very nice
@MrProfit420
2 жыл бұрын
Does it have a limiting stop or is that sold separately?
@ericpederson3105
4 жыл бұрын
Can this work with a Strike Industries Ambidextrous Mag Release or any mag release I guess?
@bigpimpin1611
5 жыл бұрын
This kit is a great concept but thats it. Had multiple issues. From rear pin being bent and not being able to function. To the detent pin popping out and having to reinstall the whole rear portion over and over as well as this kit not letting me use most magazines (had to shave each mag follower). Oh and all the jams at the range was so annoying. After all the headaches and frustration I just converted my rifle to featureless. I just wish I could get back my $60.. it seems as if the company doesn’t care either.
@BlazinSD
4 жыл бұрын
Anything else come of this issue? Sucks it happened, but hope they made it right.
@emmanuelquinones5084
5 жыл бұрын
Can that rifle be converted to a .458 SOCOM?
@HAULUUZ
4 жыл бұрын
So this will make AR 15 pistols CA compliant? And after adding this you can add features??
@davidensheiwat8160
4 жыл бұрын
Can you go over the specs of this gun like barrel, break, stock, and gun?
@rickcastillo3573
6 жыл бұрын
so the bolt open on the last shot is disabled, correct?
@ManVsChip
6 жыл бұрын
yep, no bolt catch.
@ozzymendoza4350
6 жыл бұрын
This may be the one !!! need live fire vid
@MrHerrera1512
5 жыл бұрын
Got one for my Daniel defense like 6 months back it works pretty well I like it a lot. Haven't had to deal with a jam but I'm sure that'll suck when it does come
@stayfly68
5 жыл бұрын
Mike Herrera it sucked for me at first but then I got used to it.
@XSpider209x
2 жыл бұрын
My configuration is exactly like this one. Do I still half to register my fire arm??
@2WheelsdownN
Жыл бұрын
Would this and ar.mag lock gen 2 work together ?
@Mikail0226
2 жыл бұрын
How will I transport the lower receiver with JT pin and having detent not be dislodged?
@Nick_Logan
4 жыл бұрын
Can I still run my A2 flash hider?
@unicomp5705
2 жыл бұрын
What is the make/model rifle you have in this vid?? Mike in Los Angeles, CA
@TheAlexagius
5 жыл бұрын
A good idea would to make it auto eject the mag
@GatCat
4 жыл бұрын
Audio, just gotta fix that audio.
@nelagio
5 жыл бұрын
What kind of mags are you using in the video? I installed and it doesn’t work with Hexmag or Magpul 10 round Pmags. I saw the video for grinding the follower but I wanted to know which mags don’t require grinding or filing the follower.
@tonybordon5666
2 жыл бұрын
MFT 10/30 5.556 mags...no need to shave off anything. Works perfectly and doesnt lock the bolt
@memories2121
4 жыл бұрын
It says its ca compliant,but other websites says California doj and law enforcement is not approved. I'm confused
@jeremyfelix6261
2 жыл бұрын
Can I use a brace on a rifle if it has this compliance mod?
@wbdharris
3 жыл бұрын
If the bolt release is being replaced. How do you send it home?
@SoftTacoDFXR
2 жыл бұрын
It doesnt catch the bolt back on the last round
@acuevas87
6 жыл бұрын
Tried installing it with my law tactical folding adapter and the hellfire kit did work at all.
@MrCaptCalzone
6 жыл бұрын
If I am correct, the extension plug that you have to use with the law tactical sits within the buffer tube threading not allowing the upper to crack open. In that case I don't think the law tactical will work with any CA compliant break open kit.
@fatbart8551
3 жыл бұрын
After the last shot is fired, does the bolt stay open or is it closed? Also I read that that the bolt gets caught on certain mags?
@aftermath2333
2 жыл бұрын
No and yes there fixes around both problems.
@Eric3575
2 жыл бұрын
What if the magazine fell as soon as you opened it? 🤔
@davidp9major
2 жыл бұрын
Is the installation reversible should move to a free state?
@tnCEO2023
2 жыл бұрын
If the gun jams is it a easy fix?
@MonkeyEmpires
3 ай бұрын
How do I keep my chamber open at the range?
@nomatterwhat6404
6 жыл бұрын
So theres a lot of people that have had the same issue of bolt locking on magazine and I belive its time you guys give us an answer
@Portuguese-linguica
5 жыл бұрын
@Ricky Springfield did it on mine every time . Plus the rear take down pin that comes in the kit bent on me . Ya that was fun to remove.
@raywallace343
6 жыл бұрын
Bolt hits mag follower after last shot causing jam. You need to modify your mags to use this.
@dilipvekaria1764
6 жыл бұрын
that video just shows the installation and i followed it to the T, still the bcg gets caught on the pmag follower, tried 4 diff mags, same result.
@MrCaptCalzone
6 жыл бұрын
I am having this very same issue of the bolt marring my followers (hex-mags) because there is no more bolt catch to stop the bolt. Instead the bolt goes home gouging the back of the follower.
@EvendimataE
6 жыл бұрын
your sample firearm is a pistol....so this will apply to california ar pistols? one more thing maybe you can make it auto mag drop like the armaglock....their product fully lifts the upper...im guessing they are now revising their design to make it slight lift like yours
@TheSeanfromla
6 жыл бұрын
Now That's nice thumbs up all they way up
@randomchaos606
6 жыл бұрын
Any pistol sold in CA needs to be on the approved list, rifle caliber pistols included. Because of that featureless ar pistols aren't a thing since they fall under definition of a pistol not rifle. Tacticalifornia has a good video about getting an ar pistol in CA.
@wroth_
6 жыл бұрын
an ar pistol upper/lower is the same as an ar rifle or mid length. it'll work for either.
@EvendimataE
6 жыл бұрын
i built a pistol from 80% lower before 2016 so the roster thing doesnt apply.....just to make it simple i had it serialized and register as assault pistol
@thebardock6785
6 жыл бұрын
Chai Yang ya but he doesn't really get into detail about building one from a 80% wish I did.
@retro93277
4 жыл бұрын
I just bought one a couple of weeks ago . Does anyone know what size Allen key it came with for the adjustment ?
@retro93277
4 жыл бұрын
And type
@MrVangboi05
4 жыл бұрын
1/16 allen wrench
@Booplesn00tgaming
2 жыл бұрын
I no longer live in CA. How to I get rid of the lock without screwing up my lower?
@souleternal7
3 жыл бұрын
All these comments are years old. Is this MOD still valid today 3/21/21? Also, if you push the magazine release button before the release pin that separates the upper and lower, can the magazine still release?
@garylambert6650
2 ай бұрын
Is this New York compliant also?
@evolutionxlancer9644
6 жыл бұрын
So can you keep your factory magazine button on with this pin
@Mattletic
5 жыл бұрын
Yes
@aflores5683
3 жыл бұрын
Just bought it and it will not release. Any idea what it may be. I a few miles from Orange.
@logannguyen5493
6 жыл бұрын
Can I switch the push pin from the left to the right? Since I’m a left handed shooter
@murfspop
5 жыл бұрын
I'm a leftie.Just use yur trigger finger.
@sergiocampos9371
4 жыл бұрын
Ok so what happens when u run into a double feed or jams since it won't let you release the upper from lower 🤔
@maxheadroom1506
3 жыл бұрын
CA doj does not care they will find every excuse on the book to screw you over even if you are forced to use something dangerous to you or others around you.
@ricardogarcia643
6 жыл бұрын
What would happen if you left your bolt catch on? Would it still be CA complaint?
@Mike-B-Jackson
6 жыл бұрын
If you left your bolt catch on, the bolt would lock back on an empty mag, preventing you from detaching the upper and lower. This just adds an extra step -- having to drop the bolt -- when changing mags. Compliant either way, but a deleted bolt catch is easier. There's no real use for a bolt catch if you can't remove the mag while the bolt is locked back ;)
@MrDakotaThunder
9 ай бұрын
Are you allowed to have the pistol grip and 30 round mag??? Please help me understand!!! Thank you! I really want to bring my AR 15 from North Dakota here but i'm nervous.
@JuggernautTactical
9 ай бұрын
Unfortunately - not. if you have any "Freedom Week" magazines you can only use them with featureless rifles.
@victorfranco1621
3 жыл бұрын
Has anybody had problems with her Wilson combat lower receiver and installing a juggernaut so it works?
@FFLDealerSunnyvale
3 жыл бұрын
Is this still legal in August 2020?
@lupusdeum3894
4 жыл бұрын
So, you don't have to stand on your head & juggle?! I'm sold!
@michaelpietrzak2067
6 жыл бұрын
I would definitely go this route if I were registering my AR's but since I am not, I am sol. Nice technology though
@DanTanner707
6 жыл бұрын
Why would you bother putting this on if you were going to register your AR?
@silentdude56k
6 жыл бұрын
Yeah, you don't need this if you registered your AR. This makes you 2016 AWB compliant.
@thebardock6785
6 жыл бұрын
I've read that this kit acts up with certain mags? Can anybody clarify the best mag to use with this kit to avoid problems. Read that p mags cause a few hiccups.
@dilipvekaria1764
6 жыл бұрын
i jus installed this on my ar15, and its acting up on my pmags, bolt is supposed to close on the last bullet or empty mag and its not, its getting caught on the plastic piece that pushes the bullets up on the mag, i have to depress that piece everytime to change my mag it sucks, so if ya all kno of any mags that work with no problem, pls let me know
@thebardock6785
6 жыл бұрын
Dilip Vekaria I haven't installed mine yet but heard you could file that edge with sandpaper and fix the problem. I was talking with the company and they have no trouble with hex
@rocketmonkey90
6 жыл бұрын
Just buy the AR Mag Lock Gen 2 with Kingpin. It has bolt holdback allowing for double feed clears and the use of any magazine. Watch the videos. You'll thank me later
@Boxtalk916
5 жыл бұрын
With the AR maglock I'm unable to use hex mags.
@ozzy_6779
5 жыл бұрын
@@rocketmonkey90 ewww maglock
@dimitri977977
2 жыл бұрын
Anybody knows if there would be any issues if I were to close the receivers first, then put in the new mag? (instead of putting a new mag and closing the receivers as per the video)
@JuggernautTactical
2 жыл бұрын
no issue with that at all
@bignasty924
6 жыл бұрын
So I've been wondering are you aloud to keep a 30 round mag if you have a featureless gun or mag lock?
@mexicosweird
6 жыл бұрын
nope
@Mattletic
5 жыл бұрын
Nope
@maxheadroom1506
3 жыл бұрын
you can keep your 30 round for featureless in California. The moment you have a fixed mag over 10 rounds in California as of this posting it is a scary assault weapon which should have been registered. So you can only use this with 10 round magazines or less.
@bboymonk3y
2 жыл бұрын
@@maxheadroom1506 you sure? 30 Rd Maga 3 are banned in California unless you bought a few during the two freedom weeks. Regardless of featureless or mag lock. I don't think 30 round are legal with both options
@Moto_Mo13
4 жыл бұрын
Do you guys sell AR pistols???
@StarWarsNStripes
3 жыл бұрын
so can still keep your adjustable butt stock?? or is this outdated 6/28/21
@SV_MTB
4 жыл бұрын
Shot this weekend for the first time since adding the hellfighter kit. What is the solution for having the bolt locked back on an empty mag? Using 10/30 hexmag similar to the one in this vid. @jtacticalvideos
@kennygp2004
4 жыл бұрын
See where the bolt is catching on the mag follower and shave it down a bit. This is a common issue with this kit. Once you shave down the follower, it should not snag. I hope this helps! Lmk
@kennygp2004
4 жыл бұрын
You can hard charge it a few times to mark the follower to see where you need to shave it down.
@Harsh_Trip
4 жыл бұрын
@@kennygp2004 do you know if this kit still complies with CA gun laws ? also will it fit on a left handed ar15?
@kennygp2004
4 жыл бұрын
@@Harsh_Trip CA gun "laws" are unconstitutional, violating the 2nd and 10 Amendments but I digress. Yeah, it's still CA compliant and it will work on a left handed AR. Hope this helps ✌
@Harsh_Trip
4 жыл бұрын
Pro Freedom 1000:1 tell me about it. Just got done emailing a site that had the lefty AR I was looking at but they said they couldn’t ship it to my local FFL since it’s not CA compliant. How can I install this mod if I can’t even get the rifle lol 🤷♂️
@futurus777
6 жыл бұрын
Hahaha this is great.
@raginghate
5 жыл бұрын
That gun is really sexy
@phancypheast6448
5 ай бұрын
Is this still compliant in Commifornia in 2024?
@djknucklez1
3 жыл бұрын
Magpul and any other polymer mags do not let the bolt clear after each shot. I hate it.
@maxheadroom1506
3 жыл бұрын
only thing is you have to use 10 round mags with this.
@theatms1380
2 жыл бұрын
Probably get the mlok now that I see the hell kit was going to go featureless to avoid it
@angrychivafan
3 жыл бұрын
Is this still CA legal?
@williamalbers417
2 ай бұрын
Does the bolt catch still work?
@JuggernautTactical
2 ай бұрын
bolt catch is replaced by the magazine lock, unless you install internal magazine lock (Hogue Freedom Fighter)
@rikerFFXI
Жыл бұрын
Is this NY compliant?
@humphreyreyes2255
4 күн бұрын
Shooting range friendly? Im hearing stuff its not allowed in the shooting range pls enlighten me😅
@patriotsleepercell4060
3 жыл бұрын
I did this conversion but now when i have my magazine in the gun the bolt will not come back it gets blocked by the notch on top of the mag.
@BrandoE909
3 жыл бұрын
Same, trying to find the fix. What did you do?
@liquid7315
3 жыл бұрын
@@BrandoE909 he has a video on it in this channel. Just in case you have not found a solution . You simply file the mag follower in the part where the bolt hits.
@tylerjay532
3 жыл бұрын
yeah thats the whole point of this law, to handicap your means of self defense while the powers that be have actual functioning weapons.
@moondog12320011
5 жыл бұрын
Is that nickel boron upper and lower? Or is that some kind of paint?
@scon1425
6 жыл бұрын
I think you mean "pistol brace"... WINK WINK
@MamboGuy914
3 жыл бұрын
Is this compliant with New York State as well?
@tylerjay532
3 жыл бұрын
were the founding fathers compliant?
@Ozzman6661
4 жыл бұрын
I just installed this, and when I hit the upper back into place it won’t stay there unless I push the button again??
@JuggernautTactical
4 жыл бұрын
If you are local to our shop in Orange - bring it in for our gunsmith to take a look at it
@tylerjay532
3 жыл бұрын
@@JuggernautTactical its companies like you who profit off the eroding of the second amendment. You shouldnt comply
@kenramirezchs
4 жыл бұрын
With that kit can I us my standard capacity (over 10 rounds) magazines?
@Anonymous8317
4 жыл бұрын
kenramirezchs I think ALL magazines over 10 are banned...if I had to guess. Even possession would likely be a crime.
@gary6032
4 жыл бұрын
@@Anonymous8317 actually, there was one week where you were able to purchase standard capacity magazines, and who ever purchased them during that week, are able to keep them
@mrradio2187
4 жыл бұрын
@@gary6032 lol, ask any 2A friendly leo what is and what isn't legal, the answers you'll receive will vary dramatically every time.
Пікірлер: 230