#henglong #Challenger2 #howto #rctank
Lots of work! The gun bellows are bellows pippettes stuck together with 5min epoxy and the sprayed with black plasti dip
Cut one at the ridge, the other at the trough, so they but together for the glue.
The plastic dip fills the gap and as it’s rubber paint it’s flexible and won’t crack off with movement.
I also stuck an aluminium pipe in the end of the bellows that enters the mantlet barbet so the main gun unit can be disassembled for repairs if needed, I didn’t quite have the right dia of pipe, so I just cut a smaller one in half and opened it up and stuck in with super glue.
The aluminium tube into the green Haya recoil unit works as a bridging piece to the plastic barrel allowing the use of the bellows
, this whole unit fits over the actual bb unit aluminium barrel, and slides up and down over it, much like the T72 bb recoil vid I’ve done.
Sorry it’s a long video and a bit boring!! its really for reference of what I've researched than entertainment. 😂
www.ebay.co.uk/itm/Clear-Smal...
www.ebay.co.uk/itm/PLASTIDIP-...
www.hayaltd.co.uk/Haya_Chieft...
00:00 Gun bellows
00:29 bridging piece from chieftain recoil tube (green bit) to heng long 120 barrel.
00.32 armored models gun mantlet with thermal opening door.
00:53 fitting of gun unit and rubber gator
02:03 running with the track.
02:46 power switch repositioning
03:03 plastic stick on side skirts
03:12 cloth gun mantlet shield from amazon bag
03:18 rubber mud flaps
03:28 turret cheek enlarging
03:46 turret roof detailing and reshaping
03:52 front rubber mud flaps
03:57 correct return roller placement
04:04 cut out drivers hatch
04:26 meng nuts and grab handles
04:34 anti slip texturing
05:11 front head lights grab handles and horn
05:35 rear light clusters by warren hudson
05:43 read hull detailing
07:23 indicator and break lights
07:57 gun travel lock mod to working.
10:10 rear barrel holders and ratchet straps
09:55 hull front detailing
11:45 fire extinguisher mounts
13:18 gun travel lock, lock.
13:57 more hull front detailing
14:29 turret top detaling
16:45 drivers hatch detailing
17:08 wing mirrors
18:46 exhaust detailing
19:08 more detailing!
20:10 painting
#henglong #Challenger2 #howto #rctank
Негізгі бет Тәжірибелік нұсқаулар және стиль HENG LONG CHALLENGER 2 SUPER DETAILING HAYA Chieftain AIRSOFT recoil and HAYA control unit
Пікірлер: 57