Thanks for explaining the differences between these 2 coatings. I’d love to see the water behavior of the two products and a follow up test 9 months after coating
@shrmtales
Жыл бұрын
The mistake for the amount required is in the provided sponge that sucks the life of the bottle. I found that the traditional application suede and applicator saves a ton
@KyleConner
Жыл бұрын
Great in-depth initial review!
@thewiseguy390
Жыл бұрын
I have applied mohs on a black car. It makes the color darker so if you miss a spot it will show it.
@wirraldetailing4598
Жыл бұрын
Great video buddy, this coating is getting a lot of hype in the UK so keen to try it soon. As a coating pro you must try Nanolex Si3D Max, probably the easiest coating I've ever used by far
@samuelvazquez7280
2 ай бұрын
Thank you!
@justanotherguy7798
Жыл бұрын
Love the video, great explanation, great that your partners with Out of Spec.
@ColumbusRealtor
7 ай бұрын
Best video on ceramic coating application on KZitem and great insight into Mohs. Great job! I love the lighting setup in your garage too!
@appleiphone69
3 ай бұрын
I wonder what your humidity level is and elevation is? The higher you are the faster evaporation occurs. Along with humidity.
@rob1128
Жыл бұрын
Great video. I just installed Mohs evo Syncro on my car - I think this product combo may be a better comparison to CSLexo. I found the Skin product thicker than Mohs, and reminded me of using Exo.
@mikekanney280
Жыл бұрын
Great video, I’ll will let you know my results of my first DIY.
@Admin-ie9hp
10 ай бұрын
Great video 👍. I had a question do you have a link or where I can buy that ceramic application block you use?
@frailpel
2 ай бұрын
Autofiber Mini [Saver Applicator Terry] Ceramic Coating Applicator Sponge | 12 Pack | with Plastic Barrier to Reduce Product Waste. (Gold/Gray)
@en3rgy187
Жыл бұрын
As usual great video but I got confused a little because you kept referencing another product that was not the topic at hand and did so with gusto.
@ONI1013.
Жыл бұрын
It’s interesting that I’m hearing from several people now that first layer of Mohs requires a lot more product. Can you share why that is? Or do you feel trying putting a thin coat is not sufficient? Also with such quick flash time, were you forced to avoid doing cross hatch patterns for first layer application?
@dawnkobs7652
Жыл бұрын
Somehow i think fast curing time would be an advantage to mobile detailers as it will give less time for dust to settle. I maybe wrong with this. But great video! For that vehicle how many total microfiber towels have you used? Is it the same number with other coatings?
@Schwabz33
Жыл бұрын
Nice job!! Looking forward to more content
@CryerMobileDetailing
Жыл бұрын
Great video. Just ordered the Syncro EVO that has MOHS along with SKIN. Curious if you’ve have any experience with that combo, another video says skin takes away a bit of the slickness from MOHS but offers better hydrophobic behavior. Keep up the great work!
@elwirawozniak1726
Жыл бұрын
Great channel! What’s your opinion on/ and where does Car Pro CQUARTZ UK 3.0 fit in, vs the mohs and gtechniq? (As a DIYer I have used CQUARTZ a few times, so far so good. I am planning do my wife’s car soon, open to suggestions on other products)
@danlc95
Жыл бұрын
Great question!
@user-xm8bt9pq3q
6 ай бұрын
Great video appreciate the content I was looking at MOHS and this info is very helpful !
@davida7713
29 күн бұрын
Keep your money in your pocket . Mohs evo is horrible to use & so easy to leave high spots especially if k dark colour paints .
@Shadarif1901
Жыл бұрын
Keep up the great work bro
@DavidSpector
Жыл бұрын
Really loving this channel. Very informative. I’m thinking of putting this on my car. Any reason the detail places by me need the car for a week to add ceramic if you can do two coats in a few hours?
@OutofSpecDetailing
Жыл бұрын
Typically the cars get full paint correction before ceramic coating is applied. My full details typically range from 3-5 days
@vasileiospetropoulos2046
Жыл бұрын
Thanks sir! Thanks
@danlc95
Жыл бұрын
I agree about the coating longevity. I actually prefer Optimum Gloss Coat for it's ease of use. If my clients can eek 1.5 - 3 years out of it, no worries. One of them has had theirs on since 2017! It's his baby - only goes out on nice days. But I've also had it fail before the two year point, and some go past it. Either way, after about two years it's not a bad idea to polish it off and start over. I also like the CarPro Cquartz line, but Gtechniq and Geyon have been interesting. As of today I'm probably more inclined to try the Gtechniq.
@jonluc2810
Жыл бұрын
Can you do a video on all things interior for protection?!
@OutofSpecDetailing
Жыл бұрын
Coming soon!
@jonluc2810
Жыл бұрын
@@OutofSpecDetailing awesome! Loving the content!
@BenWilliams
Жыл бұрын
Loved the review! Have you had any experience with GYEON Quartz Q² Matte? I have XPEL Stealth on my car and was thinking about trying the matte coating on top of it.
@OutofSpecDetailing
Жыл бұрын
I have not, this was my first introduction to any Gyeon coatings. I’ve used Gtechniq Halo in the past with great results!
@Rossm812
Жыл бұрын
The Q2m Matte installs and feels just like the MOHS. I keep a bottle on my work cart for cars with matte wings and trim.
@muhanadkais
5 ай бұрын
Great video like always! I just accepted a delivery of new Model Y that was polished and waxed by Tesla prior to delivery. Can I just wash it and use the Gyeon Q2 prep then apply Mohs Ceramic coating? Or you recommend additional steps?
@DS-dw6mo
Жыл бұрын
Hi! I was planning on using this on my car, would gyeon MOHS evo be safe for the headlights and glass as well?
@KingRockets
11 ай бұрын
Have you had the chance of trying Pure Evo? Can't find anything on it on your channel.
@jakebrabec1141
2 ай бұрын
So I probably shouldnt use MOHS if I live in the desert and am coating outside. Looks so amazing though maybe can coat would work better.
@muhanadkais
5 ай бұрын
Do you also think it’s safe to use Mohs on headlights and the matt black trims on Model Y?
@waxmanvids5015
4 ай бұрын
yes it is on headlights, not sure about matte tho
@andrewwiencken4588
Жыл бұрын
Do you have a link for the yellow pads? Thanks
@cswertfager
9 ай бұрын
What did you do to prep the car first ?
@sidy1611
Жыл бұрын
Hi just want to check if Mohs can be applied to ppf
@tech-knowsdad2571
Жыл бұрын
great video, where did you get the yellow/gray applicator?
@frailpel
2 ай бұрын
Autofiber Mini [Saver Applicator Terry] Ceramic Coating Applicator Sponge | 12 Pack | with Plastic Barrier to Reduce Product Waste. (Gold/Gray)
@davida7713
Жыл бұрын
gtechniq csl & exo v4 is duff. doesnt last all
@punkr6
Жыл бұрын
Last 3+ years for me
@davida7713
Жыл бұрын
@@punkr6 in real world testings it failed very quickly. Overrated garbage
@davida7713
29 күн бұрын
@@punkr6yeah 3 years sitting a garage with a unused car 🧐
@punkr6
29 күн бұрын
@@davida7713 work truck used 5 days a week , stay in the mud and I maintain it every other Saturday. Still going strong
@davida7713
29 күн бұрын
@@punkr6 it’s been well documented & proven csl & exo v4 does not last at all . I’ve also proven that with over 10 years of experience in applying ceramic coatings .
@fenceman53
Жыл бұрын
I see OOS has gone Apple Watch ultra. Are you digging it?
@teslatalk42069
5 ай бұрын
I prefer Gyeon Pure Evo
@Bull1the1Great
3 ай бұрын
Pure is harder to wipe off though
@dlj1285
3 ай бұрын
Hello here. I have the PPF specific Gyeon coating, EVO PPF. Do you happen to know if it would be problematic if 2 layers were done with this product? I was originally planning to do 2 layers, but now I’m unsure if that could be a problem.
@jeremyb4909
Жыл бұрын
What applicator pad is that? Don't see it in your Amazon link
@frailpel
2 ай бұрын
Autofiber Mini [Saver Applicator Terry] Ceramic Coating Applicator Sponge | 12 Pack | with Plastic Barrier to Reduce Product Waste. (Gold/Gray)
@sk8ordie4691
Жыл бұрын
Idk if this is relevant anymore, but I’m pretty sure their applicators have the moisture barrier as well
@talkingwithcars
7 ай бұрын
Question, if you were to leave it on for let's say....2-3 minutes...what would the removal be like? is it more difficult or would you have to re-apply to re-activate the product and then wipe off?
@TheRocky3211
Жыл бұрын
checkout forensic detailing channel for durability testing on ceramic coatings
@ZekeMagnum
5 ай бұрын
Which side on the Gyeon applocator should you use? Why are there even 2 sides that are different?!
@Six3SixTay
2 ай бұрын
It’s basically for what YOU like better as the user...There’s no right OR wrong side. Some individuals like to apply with suede & others like the microfiber. So it’s more of a “we give you options” type of deal. Me personally, I’ve used both, & I like the microfiber..but that’s just me.
@hectorlozada2503
3 ай бұрын
Where you get the aplicator pads?
@frailpel
2 ай бұрын
Autofiber Mini [Saver Applicator Terry] Ceramic Coating Applicator Sponge | 12 Pack | with Plastic Barrier to Reduce Product Waste. (Gold/Gray)
@RobHTech
6 күн бұрын
It’s designed to be able to do outside. That’s one reason/benefit to the fast flash time. It cures so fast that it’s unlikely yo get contaminated. Video is way too long
@mikezupancic2182
5 ай бұрын
I know an old video, but stop talking in years. Even Gyeon will give km equivalent which is more important. I drive as many miles a year as they consider 2 years, plus my car is outside 24/7. I would likely get a year from a 2 or 3 year coating. Also thanks for cutting the gyeon applicator open. Now ill start using mine before going to my third party versions from Autofiber. Also, i find it pretty silly that these companies make their professional only coatings really easy to apply but their consumer coatings are a little harder to apply. Its just plain stupid to believe the marketing from some of these companies.
@treygreenleaf7878
7 ай бұрын
Isn't it just SHOW spelled backwards?
@davida7713
29 күн бұрын
Used gyeon mohs evo again on a soft dark colour car & it’s a horrible whilst leaving high spots & ghosting even after using 3 cloths . I will never use this trash again .plus in real world conditions I’ve seen it fail @ 9 months on my personal car & that’s with correct maintenance
@OutofSpecDetailing
29 күн бұрын
Sounds like you need to work on install techniques. I have no issue installing it on any paint
@davida7713
28 күн бұрын
@@OutofSpecDetailing install technique is spot on . On dark colours & soft paints it’s very easy to leave high spots with mohs evo . Gtechniq exo v5 or even better labocosmetica hpc 2.0 are so much nicer install . That instant flash mohs evo is absolutely awful & can leave ghosting so easy . I’ve over 10 years experience with ceramic coatings & this is one il not using again .
@sirliftsalot1154
Жыл бұрын
So I can take the car out after 24 hours and drive it behind an 18 wheeler during a storm. The semi throwing a massive cloud of who knows what behind it on flooded highway. Wake up the next morning to a car covered in horrific traffic film but have to wait 14 days to wash it?
@sk8ordie4691
Жыл бұрын
You basically just don’t want to expose it to any chemicals, but if it’s already covered in some it’s probably better to go ahead and rinse and do a light wash with a ph neutral soap or a rinseless. Also if you need to drive the car soon after coating it you can top it with gyeon cure to be the sacrificial layer during the curing process so anything that gets on the car doesn’t reach the coating before it’s fully hardened.
@sagipho
Жыл бұрын
Always wear gloves when dealing with Ceramic coating.
Пікірлер: 74