"Brothers old underwear". You're game, good thing you wore gloves.
@speedkar99
4 жыл бұрын
Haha gloves for underwear
@seantogo2
4 жыл бұрын
Brothers toothbrush 😄😄
@dastate27
4 жыл бұрын
😂😂😂😂😂😂😂 brothers old underwear
@luisromanlegionaire
4 жыл бұрын
@@speedkar99 I take it your brother is always late in the morning to get out the door since he has to look for his items.
@_rdcn3134
4 жыл бұрын
😂😂😂😂😂😂😂I'm speechless...he said broz old tantarantemz/ drawz...#imdone
@davidgutierrez-yc4eu
2 жыл бұрын
Wow! After years of a muddled understanding on how this VVT system works, your video has clarified for me how this system operates. Thank you. Well done. 🙂👍🏼
@godsarmy3450
3 жыл бұрын
Here the trick I use to not rattle at next start. When your done driving the car , park it and let it idle for 3 minutes. At your next start it shouldn't rattle. It's been working for me .
@wilsonemeka1833
Жыл бұрын
Tried that. Didn't work
@godsarmy3450
Жыл бұрын
@@wilsonemeka1833 yes it stopped working for me too. The best you could do to minimize the sound is push the start button and let it crank but push it again b4 it starts so it could shut off, then just push it to start again normally and by then you have some more oil circulated 😂 screw it theres no way around it man. Its gana rattle. Car still runs good tho
@painkillerO8
6 ай бұрын
@@godsarmy3450😅
@alvinchiam3587
22 күн бұрын
U 👍are good
@richmccallable
4 жыл бұрын
Man if your brother wasn't there to help you with all his stuff!!
@NdalamaCassiusMaluleke
3 жыл бұрын
He literally became all the toolbox needed for the job.
@EnnTomi1
4 жыл бұрын
love this RAW content no BS straight into the point attitude.
@fastfiddler1625
2 жыл бұрын
It's nice to know this isn't a critical issue. As long as it works and you're not getting stuck in advanced or late timing and screwing up your hp and mileage, nothing really to worry about. I do see auto shop scam material here though. An expensive fix to repair something that isn't really broken.
@williamjohnson650
Жыл бұрын
Will go over 200,000
@DragonSailor-Hooah
11 ай бұрын
So it won't ruin my 2009 Pontiac vibe and leave me stranded if I never fix it?
@Jalopymedia
11 ай бұрын
@@DragonSailor-Hooah common issue. i have a 2009 aswell. i have heard of people running the car for years with VVT rattle. no problems. and if fixed it can come back still..
@zzoinks
8 ай бұрын
@@Jalopymediai dont know if this is true but I swear I've heard that there's a chance that if you have the vvti rattle on a Toyota, the part or spring could eventually come loose and that would be bad to have a loose part inside the engine. But I'd look into that before really worrying about it.
@2driftlong
4 жыл бұрын
"going to use a piece of my brother's old underwear", can I use my wife's old underwear instead? I don't speak to my brother anymore.
@tigertrail3361
4 жыл бұрын
Racist!
@flipperbooch2194
4 жыл бұрын
Tiger Trail what?
@dieselgeezer18
4 жыл бұрын
@@tigertrail3361 ?
@robinbeckford
4 жыл бұрын
@@tigertrail3361 ;-)
@thestruggleisreal9626
4 жыл бұрын
It doesn't sound like he does either to be honest.
@philipseisman1599
4 жыл бұрын
I just traded my 16 Benz for an 09 Corolla to have a cash car. I noticed this rattle and your video helped me understand the root cause. You did phenomenal at explaining everything to include the level of importance in getting it fixed. Awesome job 👏
@BlackEmigo
2 жыл бұрын
How much did it cost you?
@tomcray7907
2 жыл бұрын
Так тойота же не ломается?)) ухаха
@noahmartinez5066
2 жыл бұрын
Couldn’t have said it beyter
@qangesiyabonga7306
10 ай бұрын
Well done my brather
@ibmtpx24
4 жыл бұрын
This has been bothering me for years and I am not even a Toyota owner. Thank you so much for allowing me to sound really smart in front of my neighbors and family members who own Toyotas on Zoom meeting even all I could say was "there is a pin inside the engine that is making the noise..." before I lost them completely.
@speedkar99
4 жыл бұрын
Glad you found the video helpful and can visually see where the sound is coming from.
@Crazystuffyousee
4 жыл бұрын
I'm not sure how this channel doesnt have more subscribers... Your ability to explain and teach is awesome...!
@johnmusilamusila1218
4 жыл бұрын
Oh great content. I LIKE the way you go straight to the point. Not like other youtubers who beat about the bush to make a 6-minute-worth of content go for over 20 minutes with many uuuhuuu...ooohhhooo.....mmmmmhhhh....eeeehhhheeee.....and many unrelated stories about the hare and the tortoise going to the market to buy groceries. Very good job and good flow of content. How do you know all this stuff though?
@speedkar99
4 жыл бұрын
Thanks I'm glad you like my video style. I research online and learn as I take things apart.
@Reeothec
4 жыл бұрын
glad the rhythm of his English is probably much like his Spanish. Easy on the ears.
@frikkieramabolo172
4 жыл бұрын
Yes exactly. If it were other KZitem channels they will give a 5 day lecture about the history of VVT and the inventor and his/her upbringing,about their parents and their parent's hobbies. This is much better to the point and short and simple👍
@jasonc2948
4 жыл бұрын
Or they would show a montage of themselves playing with their cat, drinking iced coffee, never getting to the point.
@koenigturbo5907
4 жыл бұрын
you are SO SPOT ON, I really hate the You Tube vids that do not get to the point as you have said. I just watched a video where he didn't even got to point until eleven out of 16 minuttes into the video
@ChrisMuncy
4 жыл бұрын
Honda Civic reference - Nailed It.
@speedkar99
4 жыл бұрын
Zoooooom ...fart....
@checkyourself-ish
19 күн бұрын
4:40 😂 Straight pipe Honda Civic
@Z14kt12timandjes1
3 жыл бұрын
I love your videos. You truly take teaching to the next level by not only telling your viewers what is happening, but actually showing them. Thanks
@speedkar99
3 жыл бұрын
Glad you enjoy my video style
@pedrosason1935
27 күн бұрын
Appreciate the information. I’ve been dealing with the rattle for many miles on my 2GR-FE engine. My mechanic visually didn’t see anything but this explains the rattle and I’m glad it doesn’t do any major damage.
@thegravitx
2 жыл бұрын
4TH AND FINAL UPDATE ! 07/04/2024 Rav now has 308k Miles. Took the plunge and drove it to the youtuber The Car Care Nut about 8 months ago and he replaced the solenoid and installed a new head cover gasket. Rattle stopped and chain / chain guides were looking solid and no where near being damaged. Gave the car to my mom and got a GS350 F-Sport. She will eventually have to worry about getting the block replaced for a new one since it burns oil and has an engine balance rod rattle that will one day cause some serious issues. Other than oil consumption, car still runs great with at least 50k trouble free miles ahead. 👍🏻 3rd update! 01/02/2023. Car now has 280k miles, rattle has not changed its duration, remains the same since 150k ish. My only concern would be one of the plastic guides falling off due to vibration and end up messing up the chain. Update since I saw your video for the first time!! I couldn’t find my original comments under someone else’s comment. When I noticed the noise, my 11’ Rav with the 4cyl had 130k miles. Now it has 248k and has not changed (noise lasts about 2 seconds then goes away). I’ve learned to live with it and I’m getting my money’s worth out of this car. Really seems like it doesn’t damage the engine.
@manueltalavera7877
Жыл бұрын
Dude my rav4 makes that same noise, lol not to this extent but I’m taking it tomorrow to Firestone.
@thegravitx
Жыл бұрын
@@manueltalavera7877 Hey! These cars are known for this noise. My Rav now has 280k miles. Still rattles when cold starting but still hasn’t changed in termos of duration.
@thegravitx
Жыл бұрын
@@manueltalavera7877 If you have the 4 cyl, I wouldn’t stress about it
@manueltalavera7877
Жыл бұрын
@@thegravitx ohh okay, but what is the cause of it ? Ima still get it diagnosed & see what’s wrong with it, & yeah I also have the 4cyl
@thegravitx
Жыл бұрын
@@manueltalavera7877 The cause for the rattle you mean? It’s explained in the video. It’s a pin that takes a second to lock in place due to oil sipping down to the bottom of the engine. Once it builds up pressure, pin locks and rattle stops.
@dominiksi
3 жыл бұрын
My wife's CRV had the same noise, so I sold it to my brother-in-law.
@thetechlibrarian
3 жыл бұрын
I almost bought my mother in laws crv had the same problem. But she only changed her oil based on the oil life monitor and I’m pretty sure that’s why she had that cold rattle.
@KennyJoe01
Жыл бұрын
😂😂😂
@brookmohammed
10 ай бұрын
😂
@selman044
9 ай бұрын
🤣🤣🤣
@ratrodramblin
7 ай бұрын
Thanks for the tip. Good looking out.
@VladPayne
4 жыл бұрын
You are a lifesaver. Thank you for the info! Had been searching for info on that rattle for like a year now
@speedkar99
4 жыл бұрын
You are welcome.
@mecanicageneral615
4 жыл бұрын
At the end of the day your brother made this video possible. He gave you the proper tools to explain very well about the rattle. His used underware and tooth brush. Great video very well explained and very funny also!.
@InexplicableBill
3 жыл бұрын
Great video! I've heard that clackitty clack noise many times in our 2008 Highlander, which now has 220,000 miles on the clock. About 5 years ago when this started, I researched it and decided to try Motor Medic synthetic Motor Flush from my local O'Reilly's (I'm not trying to plug a specific product or vendor). Pour it in a warm engine, let it run for 5 minutes at idle (NO revving!) and change the oil. Worked like a charm! It cleaned off any varnish on the moving parts of the VVTi system and the noise stops for a number of months until it comes back and I have to do it again. It's a nasty noise as you know from this video, and it resounds throughout the neighborhood. It's unfortunate there isn't a more reliable design for this. Honestly, it sounds like your motor is about to blow up. During the warranty period of the car, we always had our Toyota dealer do the maintenance. After that I started doing the changes myself, and I soon discovered a gummy buildup on the underside of my oil cap. This led me to believe the dealer had been using garbage oil all those years, so I made sure to always use synthetic oil ever since. Synthetic oil doesn't make this problem go away, but I suppose it's possible it's delays the return a bit.
@SilkyGSmooth
3 жыл бұрын
Thanks, I'll try that also
@Inexplicable6
3 жыл бұрын
@@SilkyGSmooth Depending on how bad it is with your car, you may need to do this more than once. It worked on the first try for me, but I now do it every 2 or 3 oil changes. Good luck!
@Ye-yz7cx
Жыл бұрын
What if you don’t do anything will you damage anything in the long run?
@InexplicableBill
Жыл бұрын
@@Ye-yz7cx Excellent question to which I WISH I knew the answer.... Fixing the VVTi system as a preventive measure would cost thousands as it's a fussy labor-intensive process project. I suppose if hundreds of thousands of people with Highlanders and the half dozen other vehicle with this motor started experiencing engine death then Toyota might do something about it.
@chrisluquette1615
Жыл бұрын
@@InexplicableBill And at the same time, I got a recall for my 2011 Camry for a soft dash pad that would be replaced for free! SO why not something that is MUCH more important for a RECALL like the poorly designed TOYOTA VVT....
@kittypigeonclueless5566
4 жыл бұрын
Man, this guys knows his stuff. But it's not just that....He knows how to explain it concisely so someone stupid like me can understand. Well done!
@speedkar99
4 жыл бұрын
Thanks! Visual learning is the best.
@kittypigeonclueless5566
4 жыл бұрын
@@speedkar99 You say you are located in Canada. Are you in Toronto? If so I'd like to know if I could send some business your way.
@Sci-Mon1
4 жыл бұрын
Had this issue on my Camry as well except the noise lasted for a lot longer. Didn’t go away until I started driving. I changed the oil control valve and that fixed it.
@bokaboka
3 жыл бұрын
A house brand engine oil flush fixed this rattle on my 110K+ Camry. I ran it a bit longer than intended (2 days) before changing oil/filter because of weather, but just wanted to mention because it saved me from the "damn that doesn't sound good" anxiety every morning, even though it's probably not that big a deal as you said
@tamyrawilliams4797
2 жыл бұрын
can you go into more detail please
@tg6892
Жыл бұрын
Yes. Please more details so we can replicate.
@bovellois
Жыл бұрын
I can’t comment for this guy but I used an oil cleaner (MMO) mixed with Seafoam for a mere 15 minutes before draining out the oil and eliminated the clashing noise. Worth a try.
@shane6115
11 ай бұрын
My Lexus is300h hybrid 2014 with 60k on it every morning, always serviced on time with 0W20 oil, and you know what the rattle is staying there as it’s only a slit second in the morning.
@MrSweetaz
2 жыл бұрын
I fixed this problem by cleaning the little mesh filters that lead to the solenoids. They sludge up on these Toyota engines and then you don't have enough oil pressure at the solenoids. Very easy and FREE fix
@89Epro
2 жыл бұрын
How do you clean them do you have to take the engine apart
This is the sound of how you get to 500,000kms.+💙😊
@Bilalnwo
3 жыл бұрын
This video was a gem, thank you. My 06 Lexus IS250 has this issue but after watching this video, I think I'll learn to live with it
@zoro2266
3 жыл бұрын
Seems like a common problem with the Toyotas
@xls4750
Жыл бұрын
My 06 is 250 does the same thing lol, is your car still running?
@Bilalnwo
Жыл бұрын
@@xls4750 yep still going strong!
@HarpreetSingh-sl7zf
Жыл бұрын
Is it alright to keep it. Mine completed 130ks. If not treated ? Will it damage engine
@politiqz2222
Жыл бұрын
@@HarpreetSingh-sl7zfyou still deal with the issue ?
@davidmungai4850
Жыл бұрын
This noise has worried me for such a long time but now I can sleep in peace. My friends had crazy ideas about the noise I almost bought a new engine. Thank you so much
@JoseMartinez-ck7nu
10 ай бұрын
Is your car still doing fine ?
@matthewblack8552
4 жыл бұрын
This happens in a lot of Honda engines as well. Stealership quoted $600 to replace. Bought the OEM part off eBay, then had a backyard mechanic (works as professional mechanic for day job) do the work. Altogether spent about $350.
@xanthippas
4 ай бұрын
I own a 2011 Ford Edge but it never made this sound until I got it back from the mechanic after some extensive repairs related to a water pump failure. He looked at it several times and finally threw up his hands and told me to come pick it up. I've been Googling my hair out trying to find an explanation for what the problem could be before I take it to someone else and drop even more money on it, but this is exactly what it's doing. Now I think I can take it someone at least get them looking in the right direction. Really appreciate this video.
@colinlongstaff
3 жыл бұрын
Hi SpeedKar, THANK YOU VERY MUCH INDEED, I have a UK 2007 Lexus GS300 with exactly the same rattle, which started around 50,000 miles and has caused me a great deal of concern up to seeing your video, (now has 61,000 miles I do not drive a lot at 78 years old). Someone told me it might be the timing chain, but the rattle is identical to your example on the tube. Thank you again you have relieved me no end. VERY GOOD Video, straight to the point - I have just now SUBSCRIBED - WELL DONE!!
@speedkar99
3 жыл бұрын
You are welcome
@dennisthemenace49
4 жыл бұрын
Our 2016 Camry has done this since 30k. We change the oil every 6k. Mobil 1 0W20.Great video.
@90SkidUSA
4 жыл бұрын
I really love your videos , straight to the point . Hope your channel make it big
@Zspeed
7 ай бұрын
Your videos are not only extremely informative, but are also totally hilarious!! Thank you so much brother!!!
@speedkar99
6 ай бұрын
I appreciate that!
@glenndecker1645
4 жыл бұрын
Very interesting. Thank you for the information. Amazed at how the internal combustion got so complicated. I enjoyed your video.
@daxx1313
6 күн бұрын
Thank you! I have this rattling noise with my 2010 RAV4 and my 2012 Camry. Apparently it's a common problem but not a big issue. I appreciate the breakdown
@speedkar99
5 күн бұрын
Great to hear!
@bernardaflores1720
3 жыл бұрын
On any cars w/VVT's, I would avoid extended oil changes and follow the recommended oil weight for that engine. I see too many folks still trying to use 10-30 or 10-40 oil weight on these engines. VVT's LOVE and need clean oil to work properly.
@marvinumanzorzuniga79
2 жыл бұрын
Que aceite puede llevar un toyota corolla 2014 automático 1.8
@bernardaflores1720
2 жыл бұрын
@@marvinumanzorzuniga79 Rebisa el manual del dueno o la tapa del aceite.
@bernardaflores1720
2 жыл бұрын
@@marvinumanzorzuniga79 creo que 5-20
@TheBiteSize
4 жыл бұрын
A customer came in once with an Avalon that had no start issues and we went through everything from knock sensors to the solenoids mounted on top of the head and no luck. Put a replacement engine in and took the old one apart and discovered basically what this video explains except it was in between engaged and not engaged. Meaning the car probably never had any scheduled maintenance performed. Love the video. New subscriber here. Thanc a lot
@speedkar99
4 жыл бұрын
Ouch. So the VVT gear caused it to not start at all?
@TheBiteSize
4 жыл бұрын
@@speedkar99 not the the gear its self here at 3:16 you explain how the oil passage for the vvti pin can take time to build up pressure. Well with sludge and no interval services perfomed correctly, he had this rattle for years. So the inside of the aluminum housing the two seized and kept the intake cam shaft at such a point in between the two engagements it bent a few valves enough to not have compression in a few cylinders.
@PhilBourgeois
4 жыл бұрын
Colgate now what’s going ? Oral-b dropped out of sponsorship?
@nima20031
4 жыл бұрын
No, his brother ran out of oral-b
@PhilBourgeois
4 жыл бұрын
Nima Jafari 😂
@speedkar99
4 жыл бұрын
Oral B is my wife's toothbrush. Colgate is my brothers
@RaymondLo84
4 жыл бұрын
speedkar99 hope not ur ex wife now, i won't be happy if my wife takes my toothbrush to clean the car
@loadmasterc141b4
3 жыл бұрын
That was the most direct, to-the-point explanation, complete with humor (my brother's underwear/toothbrush)! Amazing!
@speedkar99
3 жыл бұрын
You are welcome.
@boydguie8129
4 жыл бұрын
Nice work, you are the first guy to give great detail on this issue. My 2016 2.5 Camry does the rattle. 5-30 Castrol magnetec oil helps a little.
@speedkar99
4 жыл бұрын
Yes it's better than the 0w20 specified
@captmaverickable
4 жыл бұрын
Do 5 short Oil Change Intervals at 500 miles each. The detergent additive pack on any synthetic SN oil can dissolve the carbon buildups and greatly alleviate the problem.
@hectorg7090
3 жыл бұрын
Was about to ask if changing the oil weight could help. Thanks alot guys. Was googling this issue last year and now I finally found the answers
@hectorg7090
3 жыл бұрын
@@captmaverickable 500 or 5k
@boydguie8129
3 жыл бұрын
@@captmaverickable I also did a couple 1000 mile oil changes and used Lucas engine cleaner, 1 ounce per quart. Cleans those little oil holes some. Engine has been pretty quiet. Some say synthetic forms crystals in engine. They need dissolved.
@robint8057
4 ай бұрын
Your brother gets all the credit for all his hidden contributions, Adeiu Soljour!
@happydays4551
4 жыл бұрын
your brother must be like "where did i put it, i thought it was right here"
@AlwaysontheBACKFOOT
3 жыл бұрын
All I did was change my VVT sensors and it seems to build up pressure instantly. No more noise. 180 dollar fix. Well worth it. I was at 145,000 miles.
@speedkar99
3 жыл бұрын
Good to know. Maybe the screens were clogged. What car?
@marekw.9816
4 жыл бұрын
Great job getting to the point and explaining the problem clearly.
@pierogipete3527
2 жыл бұрын
Came across this while looking for info on a timing chain tensioner rattle on my 2014 Ford Explorer. Ended up finding out why my girlfriend's Honda Fit rattles on startup xD Love your speaking and editing style: It's a lot of information, but doesn't really feel overwhelming. Keep up the good work!
@speedkar99
2 жыл бұрын
Thanks, glad you like the video style. Does the Honda fit have vvt?
@pierogipete3527
2 жыл бұрын
@@speedkar99 I believe it does.
@jw5356
2 жыл бұрын
Well i've got over 300k on my 08 Corolla now. I think I'll just Learn to embrace this noise as comforting and familiar sound. Almost like the smell of an old leather jacket.
@snortinnorton7753
2 жыл бұрын
I watched a number of video,s on this subject but nobody got into the guts of the problem. After watching I think I will just let it rattle. Thankyou.
@subatomicparticle6535
Жыл бұрын
This is really confusing because at 3:02 of the video says "And that's where we come to the root cause of this vvti rattle this little pin over here which can sometimes wear out or be lazy to retract due to just carbon buildup". Correct me if I'm wrong but the pin is unlocked by oil pressure allowing it to Retract against spring pressure and it's spring pressure overcoming residual oil pressure that causes it to Extend out into the outer housing and lock. If it was lazy to retract then the spring pressure would be causing it to be Extended out against residual oil pressure and locked into the outer housing so it wouldn't or couldn't rattle? Also at 3:13 says "Now because this pin no longer engages with the housing (pin Extended out by spring psi into the outer housing into the locked position??) the input and output is free to move relative to each other especially when you turn off your car over night and all the oil pressure drains, there's no spring pressure forcing it to go back and click inside. When you turn on your car in the morning you're going to hear the input and output move relative to each other and that's what causes that rattle until it actually clicks in and engages for that one second it takes to build up oil pressure". Again this is really confusing because previously it was said the cause is the pin not engaging (extending out into the locked position because of carbon buildup) so why would it now engage (extend out and lock) at startup especially after it has rattled back and forth for the one second it takes to build oil pressure when it's the buildup of oil pressure that causes the pin to retract and unlocks the actuator?? My understanding of this system is the actuator should be locked when you shut the vehicle off so when you start it up after 6+ hours time that the oil has had to drain out of the actuator it won't rattle and it remains locked until either a certain rpm has been achieved like above 3000-3500 or heavy load placed onto the engine and then the ECM commands the oil control solenoid on to direct oil to unlock the pin and allows the relative movement between the input and output advancing the timing thus changing valve overlap on the intake side opening the intake valve sooner on the exhaust stroke. This system is discrete meaning it's either off (no intake valve advance) or on (intake valve advanced to one position only being 15' or 30' what have you due to the internal design of the input to output inside the actuator) and is not continuously variable. The question that I'm having difficulty with and yet to find a video that really explains the oil control valve and the flow of oil to and from the actuator vanes and locking pin in detail. Does the oil flow into and out of the vanes and to the pin at the same time or does it flow opposite to each other. So when you first start the car the oil control solenoid is off and by internal spring pressure allows oil to go into the vanes to dampen the relative movement between input and output when eventually commanded on by the ECM by rpm/load but not to the locking pin unlocking it until after the ECM has commanded the solenoid on by RPM/load achieved and then shuts the oil off to the vanes allowing the dampening and draining of oil from the vanes. If it works this way and it rattles on start up until oil psi has built up then once the oil psi has built up it wouldn't unlock the pin allowing the the input to move relative to the output at low rpm which isn't when it's supposed to be activated. This part of the system has yet to explained well in detail on any video.
@gfriedman99
Ай бұрын
I'm with you on trying to figure out how this is actually supposed to work. The pin definitely locks when you shut off the car. I know this cause I've opened up the actuator on the car a few times and it is always locked. So it has to be that the spring is too weak to keep it locked on startup.
@Fanati_XX
8 күн бұрын
Thanks man was looking for a real explanation for this everywhere.
@speedkar99
7 күн бұрын
Glad it helped
@robertgestier2013
3 жыл бұрын
This is a design flaw. As you mention at 3:22 there's no spring pressure to force the cam to return to the startup position when the oil drains away. They should get rid of that lockpin and instead have a return spring system, like a clockspring, alongside the oil chambers. No more rattle, and no more lockpin wear. That's my solution.
@chadchristian3704
3 жыл бұрын
Sounds good. I also thought that sound occurs with a dry start due to oil draining back down in the pan. A high quality oil filter will have an anti-drain back valve to help prevent this. What do you think?
@speedkar99
3 жыл бұрын
Yes some engines have that giant spring on the outside. Like bmw vanos
@orbitspec9199
4 жыл бұрын
I love all the hang gestures. I don't know anything about engines and I didn't think I found it interesting until I got sucked in to your videos. Fantastic work mate. You know your engines. I wish more mechanics like you lived here
@joekrim6557
4 жыл бұрын
Starting by using OEM toyota oil filters will help. Keeps oil from draining back to pan overnight.
@chadchristian3704
3 жыл бұрын
Bingo ! That sound occurs with a dry start due to oil draining back down in the pan. A high quality oil filter will have an anti-drain back valve to help prevent this
@captfcknut
Жыл бұрын
My oil pump pick up tube screen was 70% cloggrd from one of the balancer shaft fiber gears wearing over time. Slowly clogged the pick up tube and eventually reduced the oil flow or pressure so much it did the rattle on cold start. The balance shaft became disengaged from the crankshaft becaise of this initial low oil pressure. Symptom was the cold srart rattle but also increased engine vibration at higher rpms and when going to passing gear tpm levels.
@jamesstuart3346
2 жыл бұрын
Highly informative video...100% content, no filler
@DeerParkAuto
2 жыл бұрын
No filler....Except for his brothers old underwear and toothbrush....hahaha. Good Video!!
@boogaalu5235
2 жыл бұрын
Thank you so much !! now the noise makes sense !! ive had the noise for over 4 years and its gone away now that i moved to florida i understand the root cause is in the oil and ambient temperature since the oil does not get excessively cold in florida the noise has completely stopped and sounds like a gem. now i have to address the transmission also slipping on second gear. i have 2011 Toyota Venza 2.7L i really thank you for your video
@speedkar99
2 жыл бұрын
Good to know it doesn't happen in warmer climate
@Piso86
4 жыл бұрын
Great video! My VW was doing the same noise. An oil change seems to have solved the problem now 👍
@speedkar99
4 жыл бұрын
That's temporary, the noise will return!
@RaaynML
4 жыл бұрын
Used to own a VW, it could just be the sound of the valve slamming into the cylinder head, which is a normal sound on VW engines
@GenX_US_Marine
Жыл бұрын
My Toyota Camry does this as well. During the summertime and warmer months it does not rattle at all. It only does it when it's cold outside, and it only does it once after cold start up. If I start it after it sits overnight during cold weather, it sounds just like this video. If I quickly turn my car off and start it again, no rattle at all. I've even been told by Toyota dealer that everyone flips out when hearing this noise, when in reality it's annoying and isn't gonna hurt anything. I'm just gonna live with it.
@speedkar99
Жыл бұрын
Eventually the gears wear out. Eventually.
@GenX_US_Marine
Жыл бұрын
@@speedkar99 I was told that as well. Since mine doesn’t rattle on every single start up the Toyota tech told me not to worry about it. They told me one customer came in with the same noise but his rattled every time he started his car. It’s been 3 years and that customer is still driving his car with no issues. Mine hasn’t rattled since last winter.
@PoneyBirds
4 жыл бұрын
Can you hear that quietness? It‘s the sound of one million whiners on the internet suddenly shutting up. Well done!
@mikewolf9892
2 ай бұрын
thank you. finally someone showing the problem at the root cause.. was quoted 1800$ to fix honda cr-v rattle, same issue. they were doing chain, tensioners, actuator, whole nine yards. i think i will put a new spring in it for 45 $ and call it a day,
@theusedblink
4 жыл бұрын
Dude you're such an amazing mechanic. I wanna see you, Scotty Kilmer and Chrisfix go head to head working on an engine. I think you'd take em both out.
@user-hd1qx2bd1r
2 жыл бұрын
I'd love to see them all working Together like a Team, on a big Car problem, probably be scary fast!
@juvy-lo4314
Жыл бұрын
Nicely, explained. Despite of my minimal understanding of car's engines, your video made it easy to understand. Subscribed and thumbs up!
@mutoryu
4 жыл бұрын
Changed this dephaser pulley on my renault intake shaft. Now after 7 years, hearing this noise again some times.. Maybe on next timing maintenance will change it again
@speedkar99
4 жыл бұрын
What vehicle?
@mutoryu
4 жыл бұрын
@@speedkar99 renault megane 2 with 1.6 engine
@nima20031
4 жыл бұрын
You know it's a good day when SpeedKar makes a video
@joejoejoejoejoejoej
4 жыл бұрын
I hope your brother is aware that you’re finding uses for his stuff!!! 😂 The ‘ combustion engine ‘ is an amazing piece of engineering , isn’t it?!
@ineedstuff8286
3 жыл бұрын
i cant believe how amazing it is... especially those rotary engines... that thing looks like it is from outer space
@truckman7123
3 жыл бұрын
I have cold start rattle in my old Toyota and honda for a couples of year. No change yet. After watching this, agreed it do no harm, just d rattle noise.
@speedkar99
3 жыл бұрын
Same here
@cccccc2165
Жыл бұрын
Brilliant ! Very insightful and super helpful depth of knowledge in just five minutes ! Priceless ! Personal experience: I noticed the cold start-up rattling sound after I had jacked up the car to change out all the brakes (front and rear) and rear bearings. Initially thought it was only going to happen the one time due to oil displacement from jacking up the car, but it actually happens most of the time and this makes sense based on speedkar99's awesome educational video. Many thanks !!
@chrisbradley1192
4 жыл бұрын
My '09 Pontiac Vibe (1.8L Toyota engine) does this. I've found that (on cold mornings) if I turn on the ignition and wait 5 or 6 seconds before starting then the rattle doesn't happen.
@LuisGuillermoMoreno
3 жыл бұрын
Exactly the same thing happens in my 2005 1.8 corolla
@RattleBoxMedia
Жыл бұрын
🤣🤣I can't thank your brother enough for donating his used items for your videos! Super great guy! Maybe he has some pajamas that he doesn't need anymore. Great content and straight to the point. Thanks!
@multirotormanish7220
2 жыл бұрын
Excellent video!!! I really appreciate you making this video as I am experiencing the same rattle on start up. Just purchased a used 2010 Toyota Rav4 with 2AR-FE engine with 122K miles. Love the car and was concerned on my first cold start hearing this rattle. Unnerving to say the least. Thanks for the reassurance my engine is ok.
@dark30welderwelding11
Жыл бұрын
You need to get a dealership to check it for you. There is a TSB that will pay to have it fixed up to 150,000 miles. Every thing I’ve researched says this is dangerous and can destroy the engine.
@thegravitx
Жыл бұрын
@@dark30welderwelding11 I have a 2011 Rav4 4cyl with 280k miles one. Rattle started at around 140k. It has not changed its duration or caused any damage to the engine (yet, knock on wood). I didn’t know about it when it started and found out about the TSB after the mileage window. It is what it is I guess. Too expensive to repair it. I’m planning on putting a new engine on it whenever it decides to grenade itself.
@dark30welderwelding11
Жыл бұрын
@@thegravitx It’s not too expensive. Go find the TSB just search. It’s around 2.5 hrs flat rate Parts are around $350 if you shop it. Get the Toyota OEM parts. I’m doing the intake phaser, the timing chain tensioner, the upper timing chain guide and a complete valve cover gasket kit with the O rings.
@thegravitx
Жыл бұрын
@@dark30welderwelding11 Will do! It definitely needs replacement hahahaha
@dark30welderwelding11
Жыл бұрын
@@thegravitx Mine is a 2010 RAV4 base with 213000. I truly think these 2.5L engines are as bullet proof as we can get. These new small 4cyl turbo engines are not going to hold up for the average consumer whose doing 10k oil changes even with full synthetic oil.
@streetrat6455
2 жыл бұрын
Ive been having that exact same noise in a 2010 chevy traverse except it lasts more like 30 seconds on start up. This vid really helped me understand it better! Thank you
@obsoleteprofessor2034
4 жыл бұрын
Brother: WHERE'S MY SHORTS?"
@jrhumphrey89
Жыл бұрын
Many have already said it, but thanks again for this info. I bought two 2010s model toyotas recently and was really concerned with the start up rattle.
@speedkar99
Жыл бұрын
You are welcome
@dsrevo79
4 жыл бұрын
i knew it was harmless.. you saved us 1500 of unnecessary repair ..
@speedkar99
4 жыл бұрын
Nice
@bisnaga1990
2 жыл бұрын
@@speedkar99 Hi do you know if is harmless on Vq35de Nissan 3.5 v6 engine to ?
@mjk9674
6 ай бұрын
I had the vvti rattle in my 2007 Corolla on cold start up, then i switched to 0W-30 Mobil 1 FS oil. Never had the problem again.
@speedkar99
5 ай бұрын
What oil were you using before? Usually a thicker oil helps
@kilobravo2373
4 жыл бұрын
Your videos rock man. Always to the point, and always with the toothbrush. Keep it up brother!
@AK-pu2gm
4 жыл бұрын
Thinner oil - synthetic and a high for synthetic oil filter stopped the rattle for me. Worth a try
@chrispapanastasopoulos9192
2 жыл бұрын
I just went from 5w-20 to 0w-20 (both on the oil cap) and it stopped my rattle also. 2010 Pontiac Vibe (you know, the Toyota Matrix).
@rondhole
4 жыл бұрын
That's why we should keep 5k miles oil change interval and used high quality engine oil. 0w20 in the newer Toyota with 10k miles oil change interval may be the culprit too. Some people went to cheap lube with cheap oil and still do 10k miles OCI without using full synthetic oil.
@speedkar99
4 жыл бұрын
Agreed but it's more of a design issue as well since these things will eventually wear no matter how you change oil
@rondhole
4 жыл бұрын
@@speedkar99 these problems started since toyota change oil change interval to 10k / 1 year from 5k/6 months
@ineedstuff8286
3 жыл бұрын
i mean... after spending a decent amount of time looking up this issue, i think there appears to be multiple reasons why a similar noise is created.. i see starter motor reason as one other... but man this video is amazing. Some say there is no issue with longterm damage what so ever.. and like, assuming the issue is ANOTHER reason, I still cant see it NOT being a long-term-damge issue.. Thank you tho
@JP-xd5oz
4 жыл бұрын
Thanks fore the vlog always good auto tech info love the humor as well .peace!
@speedkar99
4 жыл бұрын
Thanks !
@syedasif42
3 жыл бұрын
Wow... i hope you have solved my problem. 👍... i have 2015 Honda Odyssey and has the same noise with the cold start. And thinking to sell my car to avoid possible expensive engine repairs. Some local mechanic diagnosed that it is a timing chain problem but i don't believe them.. Your video is very logical and now i am so satisfied 🤗... Thanks for removing my stress.. ❤
@chinchy111
2 жыл бұрын
Yes hondas make the noise also. Honda has said that it does not damage the engine
@brianpetersen3429
4 жыл бұрын
Great explanation.
@speedkar99
4 жыл бұрын
Thanks
@scottbarcelona9379
Жыл бұрын
Well done 300,000kms here we go. Get her hot!
@hostilityy
3 жыл бұрын
3:34 what do you mean build up oil pressure? at idle when just turned on. Isn't that pin only clicked in there by centrifugal force at idle or prior lock before car was turned on? doesn't it only have oil pressure in there when there is demand from the driver pressing the pedal much?
@davidn.2473
3 жыл бұрын
Turn the key to ACC for 5 seconds before you turn to ignition. This starts the oil pressure first before your engine actually starts. Have been doing this for more than 2 years now and never heard that sound again.
@SilkyGSmooth
3 жыл бұрын
I will try this, thank you
@thegravitx
3 жыл бұрын
Doesn’t work with my Rav4 ?? I tried everything so many times before starting the engine but oil pressure only builds up if it’s running. I even tried turning the engine over for a split second without actually starting it to see if it helped, it didn’t, maybe I didn’t do it enough times. But at the point I would be damaging the starter I think.
@Maxx134a
2 ай бұрын
@@thegravitxI have RAV4 also. did you try changing oil to 0/20 synthetic? I'm going to try that next.
@hanzhang4846
4 жыл бұрын
key for being a mechanic: always have a brother who has spare underwear and toothbrushes
@michaelrazon2714
Жыл бұрын
One of the best in the business. Informative and funny automotive content are the best. Thank you.
@neillellman1915
2 жыл бұрын
Awesome video! Thanks for all the great content, you really explain the mechanics of components really well! Great humour too...hopefully your brother doesn't miss his old underwear and toothbrush😂
@MrMarcus5191
Жыл бұрын
Finally fixed the rattle in my 2011 Camry without taking the well maintained engine apart! The oil drains down from the VVTI actuators after sitting overnight. I simply installed a time delay relay to kick in the fuel injection after about 2 seconds of engine cranking, this gives the engine oil pump time to fill the VVTI actuators. Quiet as a mouse now. Have noticed some new cars delay firing after cranking to avoid a 'dry start'....
@anthonyrendon7714
Жыл бұрын
I have a 2011 camry with the same issue. Are you able to share a link to the one you purchased?
@1Jomarcel
4 жыл бұрын
My brother 🤣 I remember the old days when I over torque transmission oil pan broke 1 bolt,, bring to transmission shop . You know who I blame My........ brother
@speedkar99
4 жыл бұрын
🤣
@tennesseenola
Жыл бұрын
Thanks for the superb explanation of the VVT rattle. I now know everything I need to know about the noise my car makes, and I can make an INFORMED decision on my vehicle. I'm betting that your brother is older.
@afocus
4 жыл бұрын
Exact same noise on my 2014 Honda CRV
@tehgibbles8314
4 жыл бұрын
Vtc actuator is your culprit. My crv does the same thing lol. Honda has a tsb on it. It effects pretty much all their 2.4 engines
@Andrea-rg9tr
4 жыл бұрын
@@tehgibbles8314 I just bought a 2014 Honda crv 2 days ago never listen to this rattle noise until today. When I bought the car was already on so no rattle noise cad was warmed.I have been looking in the internet and there is a lot of people complaining about this issue and they have changed the VTC actuator and months later they have the same rattle noise when is cold. If we do nothing about it can this eventually damage the engine or not?
@carloschavez8922
4 жыл бұрын
Dude is smart but failed to mention that if vtc actuator fails will eventually cause driveability issues with engine timing and engine timing is critical when they cam damage valves if not timed correctly
@tehgibbles8314
4 жыл бұрын
@@Andrea-rg9tr I forget what code it is but when the vtc actuator actually fails it will set a check engine light. And yes it will cause drivability issues when it does fail.
@Andrea-rg9tr
4 жыл бұрын
Thanks. I was able to returned the CRV back to the dealership I made a big deal they didnt want me there making a big fuss so they gave me my money back. I loved tr CRV though if it wasn't for that issue. I'm not sure which small SUV to buy I dont trust Dealerships
@edanshutz8889
8 ай бұрын
New to the channel. Really well explained and demonstrated. Excellent work.
@danielwachirah5750
4 жыл бұрын
"... brother's old underwear" 🤣🤣🤣🤣 you're funny
@1marcelfilms
Жыл бұрын
Damn these are actually super simple mechanisms.
@speedkar99
Жыл бұрын
But when they fail, it's catastrophic
@jurriendw050
4 жыл бұрын
Bro that tooth brush looks exactly like mine Edit: wait a minute.....
@daxmac3691
2 жыл бұрын
These videos are FANTASTIC......you are the DOCTOR and surgeon !!!!
@speedkar99
2 жыл бұрын
Thanks
@DJWizmuzk
3 жыл бұрын
I got recommended this video just when I was about to give up on finding a solution to my cars rattling noise. Thank you so much I am officially subscribed
@speedkar99
3 жыл бұрын
Glad it helped
@andrewsantana1660
3 жыл бұрын
@@speedkar99 my 2007 chysler 300 is making the same noise ?
@andrewsantana1660
3 жыл бұрын
That same exact noise
@ihymns
2 жыл бұрын
Excellent video! Now I understand why my Camry rattles up a storm in the morning....
@ArcSGiwa
2 жыл бұрын
Thanks for this info. Experiencing this same problem with same Engine. You a life saver
@speedkar99
2 жыл бұрын
Glad you appreciate it
@declansgamereview6523
3 жыл бұрын
I lived with the rattle for 3 years - the worst part was when I sold my car and the rattle would sometimes happen in front of the potential buyer and the embarrassment but anyway I explained it is nothing to worry about. That was my used car salesman moment, I would sometimes start the car just before a potential buyer came and then normally the rattle would go away on the next start up for a little while
@chrispapanastasopoulos9192
2 жыл бұрын
Just start it before the showing. The oil pressure will remain in place and not rattle for a few hours at least. But, somewhat dishonest. That is what the seller of my 2010 Pontiac Vibe did to me. Still a great purchase anyway...0W-20 oil fixed this so far.
@bosshawg7427
Жыл бұрын
@Chris Papanastasopoulos so is that the fix? Thinner oil or something MMO freeing up the pins? I have that cold start rattle on an 05 sienna 3.3. Good to know it won't blow up, but I would like to remedy it without tear down
Пікірлер: 1,4 М.