See you all in 5 years when this is recommended again
@williamstock3007
4 жыл бұрын
see you then
@PakGuruDika
4 жыл бұрын
Hopefully ill be there
@simpino703
4 жыл бұрын
See ya!
@keshav2136
3 жыл бұрын
Hi
@gokcerbelgusen1062
2 жыл бұрын
here
@KelDG3
4 жыл бұрын
Do you want replicators? Because thats how you get replicators!
@pollenhaze8239
Жыл бұрын
I've never been a fan of hobby servo based walking robots, just because of the sheer noise and often jittery motion, but this is probably as good as it gets! You've done a great job!
@TheHottrod3000
Жыл бұрын
The servo motors which he is using are small but possess a lot of torque and induce a shit load of current. It’s def a step above the average hobby servo. If you don’t know what you’re doing, you’ll absolutely fry your board like I did.
@kenziv6914
4 жыл бұрын
Teach this to jump, to jump in different directions. Make the plates on the feet ,for sand ground . Installate the equipment and you'll could send it on the Mars.
@Markfps
4 жыл бұрын
The best legged robot that I've seen after spot mini
@zenithpals9758
4 жыл бұрын
Markfps search assault type thomas ,you can thank me later
@zenithpals9758
4 жыл бұрын
But the thing is on the chinese/japenese so just click on the first video
@Markfps
4 жыл бұрын
@@zenithpals9758 I can thank you now! hahaha omg fuel nightmare, it's bouncy and dangerous. I love it.
@zenithpals9758
4 жыл бұрын
Markfps 😂
@DamianReloaded
2 жыл бұрын
I'd go and say this robot movements are an order of magnitude more elegant than spot mini
@williamiannucci2740
4 жыл бұрын
This ain't right , to much to close to nature plus I don't like spiders.
@drillx6950
4 жыл бұрын
Look at him dancin at the start
@sirstotes
4 жыл бұрын
he vibin
@UltimateEntity
4 жыл бұрын
Her
@grey1185
4 жыл бұрын
This is very interesting, I was actually designing a quadruped and seeing this i might actually change to a hexapod seeing it has a more stable and a more fluid way of motion compared to quadruped. KZitem needs more videos about this exact topic, so keep up the good work, you deserve way more subscribers for this.
@ddegn
4 жыл бұрын
Hexapods are cool (especially the one shown in this video) but quadrupeds have an extra creepiness to them. Search for Halloween Hex on my channel if you want to see my hexapod. I made it using a cheap parts kit off ebay. I added the LED eyes myself.
@Solizeus
4 жыл бұрын
Someday this will jump, run faster than a human, climb walls or even fly...
@vikrantbagde612
4 жыл бұрын
And then new terminator dark fate Will rise To hunt down humans
@josephhalton6257
4 жыл бұрын
@@vikrantbagde612 well that was a bit of a change
@AleksandrStrizhevskiy
4 жыл бұрын
And will have a turret on it's back.
@minmimimi2810
4 жыл бұрын
Flying spiders🤔
@elmergloo3259
4 жыл бұрын
I’m working on a jumping one now actually lol
@marcio6498
3 жыл бұрын
Please my friend, help me.
@Tetra3Ne56scur
4 жыл бұрын
This is cool! A lot of movement and durability on the legs. So are you using 2 servos on each leg?
@DivyanshMMMUT
4 жыл бұрын
There are three of them dude
@Tetra3Ne56scur
4 жыл бұрын
Divyansh Maurya ok dude
@ipadize
4 жыл бұрын
@@Tetra3Ne56scur cool dude
@vinsonraypan8127
4 жыл бұрын
I really hope you make a physical kit of this. Because I'm really willing to buy
@icedelectriced
4 жыл бұрын
0:20 *TAP TAP TAP TAP TAP TAP TAP TAP TAP TAP TAP-* am i the only one who found that annoyingly funny
@marcio6498
4 жыл бұрын
Hello my friend. Thanks again for replying. Yes, I downloaded the folder, but I don't know how to insert the Python code in LinkIt, that is, in the Arduino IDE. I'm not really understanding how to do this. It's because I don't know how to program, but I really want to do this project. Please my friend, help me please.
@daverei1211
4 жыл бұрын
Very nice, good quick movement. Did you do the electronics and coding? What microcontroller do you use? You should do a video on that 😀
@IQRA2002
9 ай бұрын
How to buy this amazing robot
@ddegn
4 жыл бұрын
Nice photography! Your thumbnail looked like it was CGI. Thanks for sharing your work.
@bakagamer4
3 жыл бұрын
watchdog legions spider bot
@AzRill5
3 жыл бұрын
I’m making a beetle mech hexapod from scratch and these videos inspire me a lot!
@marcoreviews
2 жыл бұрын
Happy new year 🎆🎊🎈! Your robot spider is amazing!
@roidroid
4 жыл бұрын
"Swift mode" (Speeds up footage) Lol dude wut r u doin
@marcio6498
4 жыл бұрын
Hello my channel friends, can someone explain to me how to insert the Python code in LinkIt? I know the Arduino code, but the Python code doesn't. Please help me. Please, please, please.
@BooBar2521
Жыл бұрын
What a nice project. I am looking forward rebuilding this and adding a teeth like gripper
@joramvdweerdhof198
4 жыл бұрын
I think it's cool if you put an FPV camera on the hexapod
@madewira9572
4 жыл бұрын
Where I can find app Android for control this hexapod robot thanks..
@yitian7022
7 ай бұрын
Hi, I saw your robot Hexapod, even though it was posted 5 years ago. But I love it. I also wanted to make one, and in a search, I found a video of both authors. www.youtube.com/@MakeYourPet kzitem.info/news/bejne/zo59sYZ9cZSHhKA I don't know who the original author is (or maybe I just want to find a newer and cheaper version and try to make it). thank you.
@grzesmalik
4 жыл бұрын
Please help !!!!! This is a GREAT project I would like to build something like this !!!! I have all the parts and Linkit 7697, I just don't know how to program it, I have Windos 10, could you do a tutorial on how to program Linkit 7697 Hexapod V2.1 and control LRemote. The GitHub website did not help me much in programming Linkit. Please record a tutorial with links to programs so I can give LIFE Hexapod !!!!!
@smallptsai
4 жыл бұрын
for how to program 7697, please visit its official web site: docs.labs.mediatek.com/resource/linkit7697-arduino/en
@carlosrengifo5154
3 жыл бұрын
No hay suficiente explicación, para que dejar algo así, si la gente no podrá hacerlo.
@manoi2010
5 жыл бұрын
Do you want sell?because I search only ready to run.....please let me know thanks good day
@smallptsai
5 жыл бұрын
hi, sorry I don't plan to sell it, thanks.
@MrFakil
5 жыл бұрын
hello. It is like really good. i want to make one . could i use the servo SG90?
@smallptsai
5 жыл бұрын
Yes or No, the 3d model will need a little adjust because the dimension of SG90 and MG92b is not the same. Besides, SG90 has little torque and may cause slower movement.
@Дм.Ме-109
Ай бұрын
In the case of a rollover, the inversion of the program, bottom, becomes top, top-bottom.
@赵梦琦-j3c
Жыл бұрын
Can I have your contact information? Steering engine control with single chip microcomputer or remote control? How many degrees is the steering gear? mg995 and other steering gear can be replaced
@heyitsmepavan1674
7 ай бұрын
Can you plzzz make a video of full assembly of this robot including code and control too
@jennatamayo4730
4 жыл бұрын
Cool spider
@budirahmani
4 жыл бұрын
1:20 challenge mode is cool.
@mosu8779
3 жыл бұрын
can i make something like that using a starter arduino kit? p.s. i have no coding or robotics knowledge :D
@mawmeo2332
5 жыл бұрын
Woow Amazing... Can it run on pure arduino + servo controller??
@smallptsai
5 жыл бұрын
Yes or no. linkit 7697 (current in use) has BLE, so if you can use a arduino and BLE shield it might be possible.
@yvan6719
2 жыл бұрын
Hi, the Linkit is not available anymore :( do you know a similar one ?
@Camilo-pm6lg
3 жыл бұрын
Somebody Help me please i Need to buy those bolts M1 where i can get those?
@GameTime-to9gm
3 жыл бұрын
Is that arduino?And how & where can learn make like this?
@eduardomeller6926
Жыл бұрын
Hello, my friend. I completed all the mechanical parts, but I was not able to buy the Linkit 7697. It is not available anywhere anymore. I really wish you could make a tutorial on how to control it with raspberry pi 4 and 2 commercial available PCA9685PW 16 Channel 12-Bit PWM Servo Shield Driver. I have to confess that you code is very very complicated. It mixes python and arduino codes. A video showing how to upload everything would be very helpful.
@ajujat4032
Жыл бұрын
sir please provide CAD file 👏👏 and dimension
@FoxThunder80
4 жыл бұрын
Hi, could you please link the Lipo you are using ? I'm not able to find a lipo of the right dimensions.
@lucaspolodna2432
4 жыл бұрын
Thats awesome, Im quite amazed how hexapod robots have evolved throughout the years.
@Mark_badas
4 жыл бұрын
3d printer get cheaper microcontroller get cheaper and easier to use.
@ray-charc3131
4 жыл бұрын
@@Mark_badas i knew them but cannot achieve this one.
@aquelealex457
4 жыл бұрын
Holy shi*!!!!😱🤯, a incrible robot, very realistic. I don't know if is a fake news or montage, but is work very well doed, congratulations for the creators this fuc* very fuc👏👏👏👏
@ITACHI-wq8fc
4 жыл бұрын
how about putting a camera in there
@eduardomeller6926
2 жыл бұрын
Hi, I teach robotics to 14 years old children and they want to make a hexapod. Do you think we can use another board with the same code as you use? Your Linkit 7697 board is way over budget for us. We have arduino and raspberry pi. Do you think it can work?
@JonathanQuishpe-qi7ni
5 ай бұрын
Cuales son las medidas del Hexapod?
@edgardchupalarico6672
4 жыл бұрын
Es casi un arte. Increible se ve natural los movimientos.
@alexplorer9620
3 жыл бұрын
Hi, I´m trying to build a pod based on your design. Can I exchange the linkit 7697 with an arduino + BLE shield? Because I got a spare arduino getting dusty around here.
@Scott_C
4 жыл бұрын
Can Anything to be done about the loud servos?
@andrewwatts1997
4 жыл бұрын
You would have to get metal gear digital servo's(They also have a higher refresh-rate ), perhaps add additional lube and avoid cheaper servo's. Updating the position values less coarsely also helps allot. Installing rubber sound insulators between the servo legs and the output would also help reduce the transmission of sound from servo to leg. To reduce wire clutter you could use robot servos, they are pretty strong, silent, work with I2C and actually output temp data as well which you could use to avoid overheating.
@Scott_C
4 жыл бұрын
@@andrewwatts1997 now that's a bot id like to see /hear. I imagine with the upgrades it's strength would be upgraded too. I'd ride that spider to the store.
@d-rockpain4250
4 жыл бұрын
I feel these should be done up like aliens or facehuggers or something. These move so organic, that it would make for some funny scare videos. 4way stretch fabric with some foam pieces cut and added with lots of gloss to look slimy.... LOL Please someone do this!
Hi , thanks for the project . i have aproblem, the hexpapod start to move but after some seconds stop, i need to swith off and on for restart, but same problem after a few seconds. can you suggest me a way to solve? thanks a lot
@karthikranganathan6523
3 жыл бұрын
Can you pls upload the body part🙏
@marcio6498
3 жыл бұрын
My friend please. Explain to me how to insert the codes in LinkIt.
@zeke8120
4 жыл бұрын
can i run the code just on raspberry pi 4 instead of Linkit 7697?
@dong9224
4 жыл бұрын
Do you have a parts list? screw sizes and quantities, type of servo (they look like MG90s), is it Arduino.
@MotiviqueStudio
3 жыл бұрын
"Oooh a VERY sassy robot." - Ryan George. Probably.
@zeke8120
3 жыл бұрын
Can this be done with raspberry pi zero instead of Linkit 7697
@gugoscreen
Жыл бұрын
battery or petrol?
@rmigofun
3 жыл бұрын
Your spider looks more interesting than ours! Especially the color.
@almazbekamanbaev5507
2 жыл бұрын
what the dimensions of the robot
@DevilcraftTV
3 жыл бұрын
Did you make it just for fun or is it in combination with your studies or something similar?
@jonathanelidramirezaranda5762
4 жыл бұрын
Hello, who helps me is that the servo motors that I am going to use are of another model, could you help me?
@jonathanelidramirezaranda5762
4 жыл бұрын
Sg90 mini
@karthikkrishna5870
4 жыл бұрын
Imagine this over 100s of them walking into a busy a place. They r swamped.
@ferliikbalmaulana6378
9 ай бұрын
Info prgramm banggg
@khaerulti
2 жыл бұрын
please make video tutorial
@waynefilkins8394
4 жыл бұрын
Imagine longer legs with 1 more servo per leg. It would be more like a spider and less like a turtle, could fall over and flip right back over on its own
@Aurora-nd1zs
4 жыл бұрын
Ewwww . . da fuck is that warm up .
@luisarruda2443
4 жыл бұрын
O movimento é sexy.
@ВладиславПопович-в6к
3 жыл бұрын
Hello. Where can I download a 3D model of spare parts?
@jamescameron1682
4 жыл бұрын
Looks like my Asus router wandering free...
@marcelllo747
4 жыл бұрын
Que aranha é essa que sobe pelas paredes? 🕸️ 🕷️🤔
@songsofsoul6657
4 жыл бұрын
Can u imagine that this robot run fast and then attack the terrorists quickly its fantastic
@iamapebble0
2 жыл бұрын
Woooooaaaaahhh it's sick dude! And the walking is smooth as hell
@yvan6719
2 жыл бұрын
Hello ! Really nice 👍 do you share a diy info somewhere ?
@edison8309
4 жыл бұрын
Could you recommand any 3D design software which is easy to start with for beginner? Thanks!
@sodhisinghyoyo3126
4 жыл бұрын
You make a good stuff what happens if wee putt some guns on it and its sige is biger
@Tomer-The-Pilot
4 жыл бұрын
I want to control it via RC controller and a receiver, is there any controller or code to use for this purpose, maybe arduino? Thank's
@flyerminer
4 жыл бұрын
Really disappointed crab rave wasn't played at the beginning. Had the right movement for it.
@RahmatPurnomo64
2 жыл бұрын
How mucj?
@FIXDIY
4 жыл бұрын
Good robot
@enimativd9106
4 жыл бұрын
these hexapods would they also work while using sensors to let it know if obstacle is there ?
@pawewojtys202
4 жыл бұрын
So you are including all informations in the description needed to build same?
@djatiecitra
Жыл бұрын
Can i use mg966r?
@couchpotato5145
4 жыл бұрын
were you got the musik from (2:00Min) ?
@majetyprashanth1590
4 жыл бұрын
Do post the making / building video of this robot
@alexshel8578
4 жыл бұрын
this one is supercool how about jump??
@MrFakil
5 жыл бұрын
Hello. Could you help me again? i have made it with servo SG90. but it's not working very well. when leg is moving, it is starting shaking. ( probably servo can't stabilising). Have you ever seen like this problem? I uploaded small video in my channel with this problem.
@smallptsai
5 жыл бұрын
Hi, I saw your video, if the servo has too much "tolerance" (means you can move the arm forward / backward a bit when it is not powered) this shaking might happen a v2.1 I have add a screw at each joint to tighten the shaft so it is harder to move, you can try it
@bebesbaba3829
4 жыл бұрын
ему надо корпус тёмный, какого то насекомого, и глушитель звука если это возможно
@itubeyourass
4 жыл бұрын
Now you realize how perfect the nature is.
@lumpyspacecollection1034
4 жыл бұрын
Yes I do bro!
@ray-charc3131
4 жыл бұрын
But, some useful ones were cracked by human. Many still are unknown.
@niekon2600
4 жыл бұрын
Nature does a lot of things really well but it's far from perfect.....
@itubeyourass
4 жыл бұрын
@@niekon2600 the nature is so perfect that even your post will mean nothing in 1milion years when nature will delight itself with new species and new weather. Trust me nature is perfect in every way, we aren't. If it helps you in any way, you and me are another failed mutation, nothing more.
@SkypowerwithKarl
4 жыл бұрын
It would be funny as hell the run it into a colony of feral cats and watch the reactions. Attack, run or follow it?
@antoniomarcosbarbosa2821
4 жыл бұрын
Justamente naquele momento que caiu e ficou inoperante, uma solução ao meu ver "prática" e a de colocar nas juntas das pernas da aranha o sistema de rotação individual, parcial ou total delas. Assim a aranha basicamente não vai ter lado. Ambos os lados vão ser o certo. Até porque este protótipo não carrega pessoas dentro dele!
@somerandomguy2892
4 жыл бұрын
Use a latex for a skin and make it look like an alien face grabber.
Пікірлер: 299