Imagine hopping in this guys car, asking about his sound system and he says he has dual 3 inch subs lmao
@Biowolf626
4 жыл бұрын
I’m running an American bass vfl 8 inch sub, makes my roof flex on my car lol . I love small subs
@GayvonMark
4 жыл бұрын
i have a single 4" sub, and i love it.
@DjR3aper
3 жыл бұрын
@@Biowolf626 savage
@IncertusetNescio
3 жыл бұрын
Then, after the funny look they give you, turning them all the way up and blowing his mind.
@fendt126
2 жыл бұрын
And those mini drivers are as expensive as 8 inch sub
@Mitchelmp5
4 жыл бұрын
How he manages to increase bass on these mini speakers blows my mind
@juststuff5216
4 жыл бұрын
How does Pete do it? I believe its two things, 'Education' and 'Acoustics'.
@aaweso_me5200
4 жыл бұрын
@@juststuff5216 :facepalm:
@UniCrafter
4 жыл бұрын
Impedance matching. These drivers are so small, the more you can port load the driver, the more it can achieve. 6th orders, T-lines are very capable, I'd like to see what a horn in this form factor could achieve, though I imagine it'd be a nightmare to fit into the build plane of a 3D printer. Folds galore.
@jonhitch6786
4 жыл бұрын
Its Science, Yo!
@el_teodoro
4 жыл бұрын
If only he was a bit educated in gym, he could worked that weight off.
@81mont
4 жыл бұрын
In addition to great audio and 3D printing content, the videography, editing and audio quality of this video is fantastic. The transitions from video to rendering/animation, beautiful. I couldn't help but to comment, your production quality exceeds that of most channels with 10x more subscribers. Thank you for the craftsmanship, greatly appreciated.
@timv9850
4 жыл бұрын
This is by far one of the best KZitem channels I have ever experienced, and I've been using this platform for over a decade now. You're incredibly honest, precise, transparent, and efficient! It's so rare to hear someone speak so humbly on here, this channel is a much needed refreshment 🏝 thank you for all that you do, I appreciate you! cheers 🎆🎇
@waynenakanishi971
4 жыл бұрын
This seems to be the best solution that I can stick one underneath the front passenger seat. Thanks for your amazing content! Cheers
@prxrb
4 жыл бұрын
These videos are really unique and interesting because they 1) demonstrate how 3d printing can be an enabling tool in the advancement of other hobbies and knowledge domains and 2) because Hexibase is capable and intelligent, but not a dedicated 3d printing expert. This gives a really interesting look into what is practically achievable for a hobbyist that wants to use a printer as a tool, and does not want to invest a ton of time into becoming a 3d printing specialist. For years now, almost every commercial printer has been capable of producing excellent parts in the hands of an expert or specialist, so the evaluation criteria needs to shift to what it is capable of producing in the hands of a competent generalist.
@neur303
4 жыл бұрын
3d printing: definitely check out "make anything", cnc kitchen audio: i only know you hexibase :)
@jasperrost78
4 жыл бұрын
Audio channel: zreviews 3d printing channel: cnc kitchen have fun.
@muffty1337
4 жыл бұрын
CNC Kitchen is great. But not much content lately
@D4rk51d332
4 жыл бұрын
Z reviews is one of the most entertaining audio reviewers out there.
@JuanAuribus
4 жыл бұрын
Zreviews cringe shill
@liftsalot
3 жыл бұрын
@@HexiBase Definitely more of a rant type of guy than a review channel tho. I'd say you gotta really try to understand what he likes to get more than a recommendation from him. Gotta say tho - he has a large influence over the audiophile community, especially the newbies.
@yfz450rider39
3 жыл бұрын
I bought Sennheiser HD660s all because of his review and they fucking RULE!
@_N_B_0496
4 жыл бұрын
Wow, I love how much bass both setups play, and especially how clean the sound is! But I love more bass so second I loved the second setup more.
@SPEAKERSRULEMYWORLD
4 жыл бұрын
brought back some "what's in my trunk" vibes
@JBernhard72
11 ай бұрын
I built one of these and stuck it under the passenger seat of my 1990 VW Cabriolet.... amazing performance!
@sdr222725
Жыл бұрын
I had one of these woofers, but no 3d printer. I wanted to give this design a try, so used just one woofer and built it off 1/2 inch MDF. Of course I wasn’t able to make the curves like hexibase. But the design delivers. It fills my 2 car garage with ample bass. 👍 to hexibase.
@tgxmike
4 жыл бұрын
You designs are incredibly impressive. Your little 3" sub builds get my 15" sub in my living room moving. None of my book shelf speakers nor headphones can reproduce the bass properly. For anyone who is watching, if you don't have a system capable of producing some seriously low frequency bass, you are totally missing out.
@Silentalarma
4 ай бұрын
Oh boy... Friend priented the enclosure for me, and boy does it sound Hi-Fi good! It's unbelieveably precise for what i'm used to (10's and 12's, JL's and Audison.). Sure, it doesn't have that much party factor, but for most applications it definately has enough of it. I'm gonna get more of these for the cars i have, this became an instant "go-to" solution for my needs. I'm definately going to experiment more with these.
@ThujanK
4 жыл бұрын
I am going to build this along with his bookshelves he designed for a desktop 2.1 setup! Super excited! I bought a bigger 3D printer just to build these.
@pedroerocha4194
4 жыл бұрын
Excuse me, how much are we talking about here?
@diginomad6016
4 жыл бұрын
@thujan ha ha.. hold my beer, a core xy is on my way.
@zeendaniels5809
3 жыл бұрын
I know that you said that this isn't a replacement for a proper subwoofer... But man, it really delivers. For small cars you really don't need anything else just to get that juicy bass boost.
@uniiin
4 жыл бұрын
Audio (Mixing/Microphone techniques): SMG media Audio (theory): 8-Bit Music Theory Audio (Bass): Jonny Long Audio (Drums): Steve Holmes Cheers HexiBase!
@loxion4587
3 жыл бұрын
So I went ahead and got me a printer after watching your v.2 build. It was my first print ever so there was a lot of trial and error. I got it done and opted for an internal bluetooth circuit amp and power supply input as the only externally visible connection (Pics on thingiverse). This is doable, thanks to you Sir! Just finished v.3 for my desktop setup the other day. Got a Dayton Audio DTA-2.1BT2 100W 2.1 for a dedicated sub channel and 2 satellites laying around AND THE SOUND IS AWESOME!!!! The dual subs don't even break a sweat, so I'm working on a remix now to take advantage of my 310x310 build volume. Will post on HexiBase Thingiverse remix page once complete with specs.
@LakerTriangle
4 жыл бұрын
"The HEADPHONE Show" is a great YT ch for audio nerds.
@hondayamaha3
2 жыл бұрын
This deserves more views
@dwalker112
4 жыл бұрын
An 8 inch box with the same technology and thought would be the ultimate compact sub. Truly amazing my friend 👌🏾👌🏾
@kevinAuman1
4 жыл бұрын
If you all can imagine how well these two little 3in drivers perform with Pete at the helm of the design wheel then take a moment and try to imagine the series tuned 6th order box that he designed for my Sundown Audio X15d2 and how incredibly violent yet clean it is lol it will blow your hair right back flexing my windshield and yet all the while it sounds absolutely concert clean doing so! AD designs for the win 🔊🔊🔊🏆
@carloslopezgreses3947
4 жыл бұрын
As a HexiBase fan, I love your builds, but please Peter, try making your speakers fit in most 3D printers with 220x220 printing base. Thank you!
@nathanbulle5782
9 ай бұрын
Awesome build! I had to chop each half into 4 equally sized pieces as there was absolutely no way on earth my printer was going to print a part with that much bed surface area
@takeshikovax6254
3 жыл бұрын
I love Tang Band. Listening to this video on my desktop with a Voxel mini-sub, and I've built Paul Carmody's Isetta as well.
@pIotney
3 жыл бұрын
I've just came across your channel browsing through car audio videos. You, sir, are an amazing presenter, very pleasant to listen to. Keep it up!
@DanyBoi05
Жыл бұрын
Watched a few of your videos today, im very impressed, love the detailed information you give.
@z3r0x777
4 жыл бұрын
Brother this videos blow my mind every time. I have learned few tricks here and there and I enjoy making my own boxes and stuff but the patience and science you display along with the precision and care are Fantastic. Thanks for sharing this awesome knowledge with the world.
@dvlarry
4 жыл бұрын
1st class production and editing.
@billklement2492
Жыл бұрын
I'm pretty impressed! I rebuilt my printer and was looking for some large prints to try. Printed just about perfectly! I did have a bit of problem with the corners lifting, but that's my fault. It goes under my desk, so I'm not too worried! I also had to sand the tongue and groove to get them to fit together. Also my fault and I haven't fixed that yet! Also... Don't use 5 minute epoxy. It takes too long to cover the whole joint! I just barely made it. I pared it with a pair of the Back Horn sphere speakers with Tang Band W3-1364SA speakers I had laying around. Sound great! I'm powering them with a Fosi Audio BT30D-S with 50+50+100 watts. This speaker makes a great setup for my desk! You'd never believe this was 4 3" speakers! Sounds so much bigger! I can't believe the sub makes so much bass!!! Hexibase, you’re amazing! Thank you so much!!!
@jedpetersen3806
4 жыл бұрын
Ivan Miranda, it's 3D printing he does some big prints even as far as making his own large printer!
@swedebug2889
4 жыл бұрын
My super beetle needs a v.3! :O So tiny, so much base!
@anasevi9456
4 жыл бұрын
making small big, and big small; is the final tier of engineering gratification.
@karlbarstad
4 жыл бұрын
Could you also make a video on your education regarding audio? Perhaps what got you started, how and or where you studied, and where someone that’s interested may start? Great work as always! Thanks for the incredible videos.
@sadboycali
3 жыл бұрын
I'm high key thinking of getting these printed. I have a 91 d350 and with a single cab it's hard to get subs in it and this guy sold me on the product so I might be rocking them lol
@TheJimmydan67
4 жыл бұрын
WOW...version 3 is pretty amazing....version 2 is no joke either....it is so awesome to me that a 3 inch driver can do that much bass...or in v.3 MORE bass...truly impressive :)
@Therealmcdoc
4 жыл бұрын
Found some additional channels to recomend. Audio - Acoustic Fields 3d printing - CNC Kitchen - Ivan Miranda
@grominwithrob1339
3 жыл бұрын
These are freaking awesome. I would love to have one scaled and configured for a 8”.
@flippy9133
4 жыл бұрын
my mind was blown when you plugged in the first sub, then my mind was even more blown when you connected the second one :O do you know how much grams of filament this used? If i wanted to pay some company to print this for me?
@acartier1981
4 жыл бұрын
A suggestion to help with warping, make an enclosure, it doesn't need a top, just 4 walls, getting rid of all air circulation made a big difference for me. Not only did it stop warping, prints come out just looking better overall. Once parts express gets me my driver's I'm building one for my mom and dad 😊
@SuperRaymondh
4 жыл бұрын
Your scientific approach, integration of new ideas and technology, and willingness to try something just for proof of concept are all awesome. I enjoyed your audio vids before you integrated 3d printing... both of which are hobbies of mine as well. Keep em coming. I suppose I've got to build Hexibase V3 for my kids car now...
@xxxzeranxxx
2 жыл бұрын
Just one word - AWESOME! )
@drumbum7999
3 жыл бұрын
outstanding work
@trevor8038
4 жыл бұрын
Wow... That's really impressive
@jspencer89yt
4 жыл бұрын
Glass bed is definitely a must for best prints.
@snufalupaghus
4 жыл бұрын
Dude. I totally admire you. Been watching your vids for a small while now... (think I stumbled upon you via some other bass channel). You positively have a music theory degree, as well as a degree in electronics engineering. I'm a prior Navy radar tech, so that helps with understanding the theories you are presenting. I'm also a bass enthusiast, as well as a moonlighting EDM producer, car nut, general nerd. Mad props to you man. Keep 'em coming.
@tomthompson7400
4 жыл бұрын
great as usual ,,, this guy really does go down to 11.
@EFLO3D
4 жыл бұрын
Rounded corners tend to warp less. An enclosure would also help with your issues. Just some foil faced foam taped together and set over the top does wonders.
@cartruck1070
3 жыл бұрын
I like your channel and the car audio fabrication channel and thats about it.
@Modern-Crafts
4 жыл бұрын
I am really looking forward to see "something bigger". Like a 8 or 10" sub. Maybe you could also try to replace the flat top and bottom with a sheet of plywood or similar. This would greatly reduce the print time and also reduce the chance of warping. Or would the mix of materials have too much of a negative impact on the sound quality?
@natalietrinh381
4 жыл бұрын
I'm thinking of experimenting with this once I have access to a makerspace again. I'm also thinking that it may be possible to intentionally do a no bottom layer print at no infill and thin walls, then post print, mixing an epoxy/sand composite (or even mortar) in place of the infill. This would, in theory, reduce the amount of filiment used (let's admit it, it's not cheap), and replace it with a stiffer material with more mass. Might even arguably be easier to produce than just a straight up print.
@aaronb1138
2 жыл бұрын
The design is really simple with all straight walls and small enough to just make from 1/2" MDF or plywood and perhaps some large dowel stock routered to shape if you want to replicate the port entries while adding a form of stiffer bracing.
@brianmack6285
4 жыл бұрын
Given the long print times and the always present potential for a printing screw-up, have you considered a hybrid enclosure? Print the complex curves but use sheet MDF (or whatever) for the large pieces? Dare I even suggest a hobby grade CNC router as a new toy, err ... tool. 😉
@Shturmanp
3 жыл бұрын
cool project. was looking for something exactly like this. Going to repeat this project
@mrraimundo130
4 жыл бұрын
3D Printing: Teaching Tech Audio: HexiBase ;)
@severingetzner8211
4 жыл бұрын
Your videos ar on another level! Thanks for all the content please keep on :)
@It-b-Blair
3 жыл бұрын
True legend 🤘 they ability for you to convey your knowledge is 🔥
@MasterMark5
4 жыл бұрын
Yes! I have been waiting for the next video, so excited to watch it!
@intrusive_thought_one
4 жыл бұрын
Dam that 3rd one almost blow my earbuds
@Thelaunster
4 жыл бұрын
Awesome work and great video!
@VioletGiraffe
Жыл бұрын
That deep base output is amazing. I wonder if it digs deeper than my 10 inch driver in a 20 liter sealed enclosure. Clear difference between v2 and v3.
@robertpuckett7412
3 жыл бұрын
I'm an audio engineer, and a 3D printing hobbyist! I'm in both groups!
@MODeration_nXS
4 жыл бұрын
Amazing performance! Perfect example of proper enclosure design.
@JoeAvery
4 жыл бұрын
CAF as a Car audio vet, I still learn things from him.... SMD, for big, big sound that I would love to have
@Maglin78
3 жыл бұрын
I printed this in ABS because I have no PLA only 40kg of ABS laying around. I would not recommend anyone to print such a large print in ABS. Even letting it slowly cool down in my printer for 30 minutes it still warped, but it also still works like a champ. (by warped I'm not talking about it coming off the build plate but the walls and mostly the tongue and groove section) The thing sounds great. I'm using a Dayton Audio DTA-2.1BT2 to drive this along with the printed Full range book shelve speakers. I'm using this setup as my PC speakers and this was exactly what I was looking for. Some more low end for my PC. Fantastic. People asking about how to wire it up it all depends on the amplifier you are using to drive them. My amp is a 4-8 ohm load so running in parallel @ 2 ohm's wasn't going to work out too well and why I choose to run them in series @ 8 ohms.
@florida_man_games4312
4 жыл бұрын
Id love to see what you can build using a Car based 2 or 3 way 6x9 as a full range setup. Lots of cone area for the low end, and the built in mid/tweeter for the higher end
@utkarshvishnoi2658
3 жыл бұрын
Godly transitions man 🤯.
@LOTMAXX
3 жыл бұрын
thanks, mate, amazing editing, also the content, very informative
@mikealbright9565
4 жыл бұрын
I can’t wait to see what you print next! Big fan!!
@iraydiaz5888
4 жыл бұрын
I really appreciate the honest review and opinion on the 3d printer.
@brentspellmeyer8943
4 жыл бұрын
Design is fantastic...
@dabradguy
4 жыл бұрын
I have never wanted a 3d printer more.
@metaleddo
Жыл бұрын
builed both this and the bookshelf speaker, i am no professional but they sound great, added some sheepswole inside. what i like about this sub is it sounds great when it playes quiet or loud, but its not an concert sub cant play very loud. the port starts hissing at some point.
@ardenpm
4 жыл бұрын
Probably already aware of him but Polymate 3D is doing cool stuff with fully 3D printed (except for the magnet and coil) drivers.
@Russh1
4 жыл бұрын
Loving these type of videos on KZitem. Properly engineered and tested products. Subscribed.
@brandonsealey4511
4 жыл бұрын
I love these videos. So interesting and satisfying to watch.
@MrMen98989
3 жыл бұрын
this is simply amazing. you are amazing! astonishing work.
@ab0ngr1p68
4 жыл бұрын
good user engagement challenge sir kudos
@skizzarz
4 жыл бұрын
lower end sounds great on the v3, wicked test tracks too!
@RyuMoto
4 жыл бұрын
I really enjoy your channel. Been a subscriber for a while but really didn't get hooked until you combined 3D printing with enclosure design. I would love if you could get into the theory and practical design side of things. I've gone through almost every single WinISD youtube tutorial online but I don't think WinISD can support complicated enclosures like the ones you make (T-Line, etc). I'm looking at using a Tang Band W5-2053 and it's other slightly beefier cousin in a small car foot well enclosure. Whatever ported box I design seems to have a steep drop off after 40hz. I'm just a total newbie hobbyist and hope you can do a video on box design! Love the channel, thank you!
@Diskjok11
3 жыл бұрын
Starting to hear distortion in my right AirPod lol keep doing these I’ll watch them all
@gaspuppygarage3782
4 жыл бұрын
My favorites are Chris Riley for 3d printing and audio williston audio labs for audio Amps. But honestly hexi your by far the best at combining the two!
@AllElectronicsChannel
4 жыл бұрын
Amazing ! A useful tip when soldering: remind yourself "I'm not a painter !" Hehehe. Try to heat more the zone with proper fluxe so you do not need to "paint" with the iron. The correct amount of heat and time will improve your solder joints ;) Great video !
@0525ohhwell
3 жыл бұрын
I was actually able to print both halves with a single 1kg spool of Geetech Black PLA on a tenlog TL:D3 Pro. There was even a healthy bit of reserve left.
@procharged67
4 жыл бұрын
very impressed I like your videos a lot . I love to learn from people like you ! thumbs up
@friendmakaranda
3 жыл бұрын
Brilliant work bro... I want that double bass v.3
@lalaneverquit
3 жыл бұрын
Damn bro.... Your work is incredible. 🔥🔥🔥🔥🔥🔥
@Eisnschwein
4 жыл бұрын
Amazing how good and powerfull this smal sub sounds! Impressive!
@dherrendoerfer
4 жыл бұрын
Error 6 means that your connection between heated print bed and controller is not sound. Err6 is actually an underrun/overrun indicator for the HPB. Stop using the printer check the cables and connections, this can fry the electronics completely. My HPB cable broke at 3000h and it took a lot of tinkering to get it to work again, Had to go completely Louis Rossmann on the mainboard. I can recommend my last video on my channel to that issue. Your enclosure is printing atm on my fixed SC-10.
@dherrendoerfer
4 жыл бұрын
@@HexiBase Yeah, there's been a lot of discussion with LOTMAXX about the build plate, I still have the original with the fiberglass backing, several in fact. They do blister after a long time, but that can be remedied easily. This thing sticks like hell when it's new. I think your bad adhesion was partly due to the HPB failing and not holding the temperature correctly. My printer is in fact a review unit, one of the first printers sent through the official retail channels. It was all over the place before it was properly dialed in, now it's one of my workhorses for low resolution prints.
@dherrendoerfer
4 жыл бұрын
@@HexiBase So my attempt at printing the enclosure with the original build plate on the SC-10 failed too. It worked and did stick, but at at some point it actually started pulling the sticker off the carrier plate. I tried to segment the top/bottom of the speaker into segment squares to take the pressure of the surface, but my software wouldn't let me.
@UniCrafter
4 жыл бұрын
Audio channel- I watch a ton, though if I had to make a shortlist I watch most often, and haven't been mentioned from what I've seen in other comments: Soundman Car Audio, Exocontralto, and JoniK (Finnish with subtitles) For 3D printing type stuff: Integza, and AvE if CNC is considered in the 3D printing constructosphere
@jings1926
4 жыл бұрын
I can be a hobby sound engineer thanks to your videos. Great Content, very informative and academic.
@GOTTHEFUZZ
4 жыл бұрын
I think it would be pretty neat if you were able to put a decibel meter during the comparisons, I know you can audibly hear the difference, but it would be a neat and easy way to compare between them. And if only there was a printer that could print this with a 8" enclosure, I think at 8" it could reliably replace alot of car audio systems without the large footprint or pricetag.
@HashDogg06
4 жыл бұрын
I'm impressed with the sound quality of those mics & that's after KZitem has done it's 80 cents worth to it.
@SibaNL
4 жыл бұрын
Nice job man. Crazy result!
@grant_vine
3 жыл бұрын
Your knowledge and skill is incredible, beautiful filmography and just so enjoyable to watch someone like Discovery Channel should be looking for content like this as I can only imagine your are inspiring many the next amazing engineer. Keep up the great work
@gijoemolinaro
4 жыл бұрын
I absolutely love your enthusiasm and depth of knowledge and I'm always left feeling like I cant wait for your next video 😉🤦♂️👌keep up the fantastic work and God bless you 👏👏👏👏👏👏👏🙏
@MatthewLong8
3 жыл бұрын
What up Junglist! Love your projects and channel. Keep up the good work.
@hanswurstusbrachialus5213
4 жыл бұрын
THIS is what i need to add to my portable box... THX man :)
@Zymm2133
3 жыл бұрын
I immediately subbed once I saw the mococo drink. lol Great work by the way.
@4rc-f145h
4 жыл бұрын
Audio: Steve Guttenberg Audiophiliac, Kirby Meets Audio, and SoundBlab. 3D Printing Hammerspace community workshop in Kansas City.
@rude2em
4 жыл бұрын
2 Hexi box v3 most definitely replacing traditional subs for if available..Great Design
@BRUXXUS
4 жыл бұрын
I'm kind of obsessed with audio and the ability to design and print all things audio. As a fun little project, I've designed and printed a few actual small drivers, did my own coil winding, used high power neodymium magnets, flexible filament surround... all that. They.... didn't work well, lol. Although, my 3D modeling skills aren't great. Have you ever thought about trying to design a 3D printable driver? Could be a fun project!
Пікірлер: 755