I think this kit & conversion are the best way to get cheaper RC4WD TF2 😆. Very good project, thank you for the guide & tips
@jhessieboy
3 жыл бұрын
I was looking for ways to mount the electronic after i removed the plastic housing from the chassis. You just showed me a clean and easy way of doing it.
@Dirtbillys
4 жыл бұрын
Looks great and like you made it simple!
@dennisdempseyradiooutofcontrol
4 жыл бұрын
Nice conversion, I did the same set up, my front hubs come loose also lol,
@Bassin07Si
4 жыл бұрын
I couldn't have done it without your video! Thank you for the support!
@dennisdempseyradiooutofcontrol
4 жыл бұрын
@@Bassin07Si I like your wheel and tire combo and how you used the rear body post pin nuts on the frame awesome idea.
@Bassin07Si
4 жыл бұрын
@@dennisdempseyradiooutofcontrol i really love your bruiser videos. You are the reason i even bought an HG P407 in the first place. After i watched your video of the blue one that you converted it put me on a quest to build the hg into a scaler. Thank you for all the helpful videos about the bruiser i honestly couldn't have done it without the good info you provided
@dennisdempseyradiooutofcontrol
4 жыл бұрын
@@Bassin07Si Your welcome my friend, Its cool to see others do their builds, Thanks for your support on my channel. keep up the great builds!
@zeezeerhydon7083
4 жыл бұрын
I really like how this thing looks after all of those mods. I do miss the 3 speed but it still looks great.
@Bassin07Si
3 жыл бұрын
I kind of miss the gears but not the headache associated with it
@ozboy8144
4 жыл бұрын
That's awesome really cool work definitely like the way it looks
@Bassin07Si
4 жыл бұрын
Thank you sir I truly appreciate it!
@turbinegraphics16
3 жыл бұрын
I like the 3 speed for doing burnouts but the gears are weak.
@chrisfort7340
Жыл бұрын
Very cool! I recently got the CC-02 Bronco but the plastic frame feels so weak. How’s the quality of the HG brand? Did you ever get those rear shocks mounted up? Thank you!🤘
@Bassin07Si
Жыл бұрын
The Hg has a metal frame and pretty much all metal. The quality isn't the best but so far I haven't had any issues and yes I have installed rear shocks. I'm in the process of moving so all my stuff is packed away but I will be making more videos after I get all settled
@ToyotaGuy1971
3 жыл бұрын
I have my Bruiser locked in 4-low all the time, too. Are you gonna put shocks on the rear?
@Bassin07Si
3 жыл бұрын
Yes i am. I just ordered some rc4wd shock Mounts just haven't had time to redo the suspension
@Dirtbillys
3 жыл бұрын
Love the tires, what size? Thanks keep up the good work!
@Bassin07Si
3 жыл бұрын
Thanks for the support! The tires are some cheap ebay knock off super swampers. I just looked to see if I could get you a link but it appears they are not made anymore. They are around 85-90mm 1.9 rim. I'm going to be switching this truck over to 1.55 soon for more of a scale look.
@snap_fit8686
3 жыл бұрын
Helo sir, I was planing to make 313 wheelbase using Hp407, do you know what drive shaft i can use, for the rear axle...? Basicly a want to make a long wheelbase version of what you did here
@Bassin07Si
3 жыл бұрын
I would say check RC4wd. Their long wheelbase trail finder 2 might work
@snap_fit8686
3 жыл бұрын
@@Bassin07Si okay ,. I will ..
@emilflognoid1532
Жыл бұрын
What I wanna know, will the hgp407 accept an rc4wd 87 xtracab hard body?
@Bassin07Si
Жыл бұрын
So from my research it will not, the hg p407 is 287mm the Xtra cab is 313mm so unless you extend the wheelbase then the wheel wells will not line up
Пікірлер: 26