I love how it kind of gives off a Megatron feel, idk maybe it's just me.
@shizaaa_salad4381
5 жыл бұрын
Honestly, I feel like you can't have a sinanju without a unicorn, and vice versa. Their just too memorable as a pair.
@MrRe-pg7fj
5 жыл бұрын
Gian Jimenez Like the Nu gundam and the Sazabi.
@cheeseburgerpaladin
5 жыл бұрын
Unicorn Phenex Narrative Ver. Unfortunately nothing new about that HG since it's based on the same old molds.
@syofansaddam4568
5 жыл бұрын
I had unicorn & sinanju
@alfianfahmi5430
5 жыл бұрын
@@cheeseburgerpaladin Welp, guess we should wait for RG version.
@emmansumalabe8057
5 жыл бұрын
Alfian Fahmi what if they still reuse the frame of sinanju full frontals
@sugarhoneyicetea3040
5 жыл бұрын
When the high grade is better than the real grade
@Devixicus
5 жыл бұрын
That's actually pretty common. High Grades and the HGUC line have been around for a very long time so Bandai is super familiar with how to engineer them. RGs, however, have always struggled with finicky parts and while they look really nice, a lot of builders stay away from them because they're hard to work with. The only major exceptions there is the Mk II.
@amuroray7862
5 жыл бұрын
Damn, i was just about to comment that
@gerogyzurkov2259
5 жыл бұрын
@@thriplety4281 + unicorn and it's variants (Phenex is a given plan b rg has phenex shields) and the tallgease.
@Coolio_Ash
5 жыл бұрын
Yeah...
@razorbladeX1000
5 жыл бұрын
@@Devixicus Exia and Tallgeese says hi
@digigeek19
5 жыл бұрын
Honestly, having built both the mg and hg, I can admit I prefer the High grade.
@MechaGaikotsu
5 жыл бұрын
I can totally understand that. Sometimes small and simpler is much more fun
@laxur1312
5 жыл бұрын
Mecha Gaikotsu painting a kit? This must be the best timeline!
@SonicCam04
5 жыл бұрын
Hg are getting really good nowadays huh
@Coolio_Ash
5 жыл бұрын
At least the ones with almost all new molds yeah
@BNuts
5 жыл бұрын
Pretty sure the build on this is based on that of the HGUC Sinanju, albeit with new armour and a frame to match. Really solid and detailed, the original Sinanju came out way back in 2010. It is one of the oldest kits in my collection, and one of my favourites. Sinanju Stein will doubtlessly be right at home beside it
@Coolio_Ash
5 жыл бұрын
@@BNuts the only parts that arent new is like... the waist lol
@bagonmyhead69
5 жыл бұрын
Coolio Ash Almost no parts are old from the HG Sinanju. Its 95% a new mold
@bagonmyhead69
5 жыл бұрын
HG’s have been great quality kits since 2010. Straight builders just like to jerk off MGs.
@SoulCrusherEx
5 жыл бұрын
dont know if the quote: The Sinanju is solid like a rock was intentional or not because Stein is german and means Rock... :p. I love the Design of that HG. definetly a must have
@fireofhyperion
5 жыл бұрын
I have yet to comment my thanks to you, and your channel. However, as a Greek-American, I have found your work to be entertaining and informative. My choices of purchasing have been heavily influenced by your works. I am just a little Builder in Texas, but I appreciate you.
@averagenolife6860
5 жыл бұрын
4:56 top part of the head came off.
@user-pv1ff9rn4l
5 жыл бұрын
It is smaller than I thought.
@chasinthroughthedecade
5 жыл бұрын
I have already commented this somewhere, but just wanna repeat it: Please, Bandai, if you are planning to make a RG Sinanju Stein, DON’T EVER USE THE MK-II FRAME EVER AGAIN! Learn from your mistake…..
@nihar2001
5 жыл бұрын
True
@primecoconut4204
5 жыл бұрын
well they did very well nowadays on the unicorn and the new Sazabi, which is waaay better than the unicorn. so maybe theyll carry the assembly technique of the sazabi to this in the future
@chasinthroughthedecade
5 жыл бұрын
@@primecoconut4204 On the other hand, I imagine they would make an all-new frame for the Sinanju Stein. Then perhaps we can get a RG Sinanju 2.0 afterwards?
@shakespeareanim
5 жыл бұрын
@@chasinthroughthedecade Yes, RG Sinanju 2.0!
@tmk20221
5 жыл бұрын
I doubt they'd make 2.0s of RGs but we can hope
@Raijin24226
5 жыл бұрын
I think this ver of the Stein was the "Mid" version of the sinanju. It was mentioned that Full Frontal stole the sinanju. If it was stolen, the first looks of the sinanju would be the all white one. Then time passes by and Full Frontal made changes with how the sinanju looks, adding those zeonic symbols. Then time passes by again ang Full Frontal had all the time to repaint his machine to an all red sinanju and add that horn. Idk I haven't read the manga tho. I just deduced it from hiw the three ver of sinanjus looks like
@Chovyy-f25
4 жыл бұрын
1:25 Ver Ka.: Has Sausage Fuel Tanks HG: Has FootLong Fuel Tanks
@Charl0803
5 жыл бұрын
2:19 RG unicorn... glorious! 😂😂😁 luv it!
@melsgamingvault
5 жыл бұрын
"Glorious..." i love the RG Unicorn too!
@Frolaire
5 жыл бұрын
I'm honestly contemplating preordering the MG because I loved the regular MG Stein.
@MechaGaikotsu
5 жыл бұрын
Do it :)
@hrzworks
5 жыл бұрын
4:43 & 5:49 Of course it's rifle+bazooka and the legs is too much for the kit to handle and sag down for you if you always wiggle them like that. You dont treat your kits like that. I never heard that complaints whatsoever from the japanese reviewers
@hrzworks
5 жыл бұрын
@@terreausore2435 exactly
@vivianfoxtail5425
5 жыл бұрын
all the wiggle does is show a weakness it doesnt cause the weakness
@NeoSlashott
5 жыл бұрын
Because of the Shield, I can't unsee Wing-Gundam Stein... @ __ @ '
@EKOddLink
5 жыл бұрын
I'd buy this just for it's head sculpt. That is honestly a wicked head, and the edges are sharper than usual
@ardhi108
5 жыл бұрын
I have built mine. The best HG I've ever built. It's basically an MG Sinanju stein scaled down to 1/144 with some different parts. Once you apply decals and some detailing to the kit, it will be looked as good as its MG counterpart.
@Sotau890
2 жыл бұрын
Hg stein has no ordinary ball socket hip but a ball socket hip that can do full split gg 8/10
@Chovyy-f25
4 жыл бұрын
This is Megatron’s Mobile Suit, idk though how he will fit there XD, maybe the Neo Zeong could work
@VereoHead
5 жыл бұрын
"the real grade unicorn gundam... *glorious* "
@MahriKing14
5 жыл бұрын
As a guy who is thrilled about buiding custom Gunpla, I enjoy Sinanju Stein more than Sinanju because of it having almost too unique armor design which makes it difficult to find matching parts. Not sure if I should pick up the original 1/100 or wait for Ver.Ka tho
@forklift8362
4 жыл бұрын
Think I might get this guy and paint the white parts you painted gold.
@jakeboston1
3 жыл бұрын
This was my first kit ever. Got me into the hobby!
@duckyouall3225
3 жыл бұрын
Noice about to get mine aswell
@scottjones1219
5 жыл бұрын
U have finished making up my mind on my 1st reintroductory gunpla since childhood! Stein v2 it shall be!
@QuantaSolace
5 жыл бұрын
I just finished mine tonight after spending all weekend working on the Neo Zeong Unit 2. I don't know why but the shield and the grenade launcher don't fit on the arm on mine. I'm not sure what the deal is but it is a little annoying.
@aero981
5 жыл бұрын
My white gundam marker always comes out watery no matter how may times I shake it, does anyone know why?
@achtungbaby7190
5 жыл бұрын
Same to me, wonder is that supposed to be like that or something is wrong
@ramen4578
5 жыл бұрын
Your videos are 1000/10 Amazing
@aethansantos8989
4 жыл бұрын
When the sinanju and unicorn collide together
@maxnexus5421
5 жыл бұрын
Why did you skipped the Exia avalanche?
@amazinggunpla3778
4 жыл бұрын
Bookshelf to the right and on the shelf below the PG UNICORN, EXIA and STRIKE GUNDAM
@francisyn7584
5 жыл бұрын
Just Got mine , there are even more runners than the normal Sinanju hguc!!! I love it
@rory6835
2 жыл бұрын
One of my fav builds of all time.
@justinc6257
5 жыл бұрын
Even though it has the old ball joint hips, at least the HGUC Sinanju Stein's hip joints can swing outward. I can't tell you how scared I was in the unboxing video when I saw that the old Sinanju's hip joints were still being used.
@EndlessHeadbanging7
5 жыл бұрын
I have a question in regards to arm rotation. when i had hg sinanju the arm will pop off from the shoulders a lot when im rotating them because they were so loose. Do you have the same problem or did they fix this????
@bullettime001
5 жыл бұрын
Stein is behind Gundam age Titan third shelf
@ZeonIq
5 жыл бұрын
Uhmmnn. Wat happen to the red part of the vfin on the skeleton?
@rogerfoo166
5 жыл бұрын
It has been chop of by the chreaters
@naiseniichan8035
5 жыл бұрын
DAMN THAT EGG HEAD LOOKS SO COOL
@SovieJames
5 жыл бұрын
Would it be safe to say that one could swap parts with the standard Sinanju or the Weiss Sinanju?
@Chovyy-f25
4 жыл бұрын
We need a RG Sinanju 2.0
@CE73KiraYamato
5 жыл бұрын
Looks like right there inbetween Amazing Red Warrior and Titus
@elchito3
5 жыл бұрын
Really sucks about them using the old ball and socket hip joint instead of the more recent peg one. Some clear nail polish will probably tighten it up so it doesn't sag so much, but it definately could have been better made since they used mostly new molds for the stien. Still hyped about this kit though and look forwards to losing it with my RG Sinanju.
@0melleteDuFromage
5 жыл бұрын
Wouldn't fuel tanks be a massive, easy-to-hit weak spot for any mobile suit? Any reason for it when other UC suits are fine flying around in long periods without those?
@fto9398
2 жыл бұрын
Fuel Consumption is huge
@TY-PO
2 жыл бұрын
Is the Sinanju Stein a better kit than Full Frontal’s Red Sinanju? I can’t decide which High Grade to get:/
@fos-kun4688
5 жыл бұрын
I like to ask, the gold paint on the Unicorn Gundam 03 Phenex delicate? like will it expose the color of the actual plastic bellow it after being scratched?
@gesie0504
5 жыл бұрын
This kit is a Big SLAP on the Nutt of the RG. SHINANJU! 😁 👍🏻
@xrvega8984
5 жыл бұрын
HGs are the future
@Dragonk116
5 жыл бұрын
Bandai has really stepped up their game when it comes to high grades
@kimfunclara3826
5 жыл бұрын
Hope you can do a turorial vid on how you painted the sleeves and chest. ^_^
@kingdragoonmk10
5 жыл бұрын
Unrelated question what would you think would be a great alternative backpack for the star build strike ? Given its imfamous peacock backpack... XD
@dzzl3366
5 жыл бұрын
Top 2 shelfs (not including the roof) wow is that how collectors do it I think I need to rework my collection
@cullenbahr4549
5 жыл бұрын
I honestly would have thought that the issues with the leg/hip joints would have bumped it down a tier but it doesn't matter to me. I'm still getting it
@mrheroprimes
5 жыл бұрын
third shelf on the right third Gunpla
@barrybend7189
5 жыл бұрын
Hey what obscure mobile suits would anybody want as HG mine would be the Gaia Gear Alpha ( with every weapon and the test type head and color option as stickers)
@wingzero771
5 жыл бұрын
Hey mecha may I ask how did you paint the sleeves and chest?like what items do you use?ive never painted gunpla and want to start by painting my sinanju and getting rid of the stickers.Thanks!your are the best gunpla you tuber!
@MechaGaikotsu
5 жыл бұрын
I just used white warhammer paint. Apparently reverse washing is the way to go!
@johnharrypareofteste
5 жыл бұрын
Nice! I should be getting it sometime next week.
@gn_aethos
5 жыл бұрын
Heyy umm just a curious question, can you equip a real grade weapon in a high grade gunpla? Tnx for answers
@tacticalyuzu8278
5 жыл бұрын
I can`t believe this almost looks as good as a MG kit. Like it`s hard to tell which one`s which when I`m just looking at photos. I`ll probably end up buying both of them.
@GerindraAS
5 жыл бұрын
is it color accurate? its supposed to be white blue-ish compared to the mg?
@vendettaa72
5 жыл бұрын
What should I paint the sleeves with? White gundam marker???
@Sotau890
2 жыл бұрын
5:45 YO MECHA YOU NAIL THE FULL SPLIT MAN
@ewaltzbob
Жыл бұрын
hi,does the rg 1/144 sazabi dwarf that sinanju stein? same 1/144.
@kennieva5269
3 жыл бұрын
Is the bazooka of this kit also could fit in the rifle of the regular red hg sinanju? Thank you
@RiderSkullMan
5 жыл бұрын
Quick question: can the bazooka attach to the RG Sinanju's beam rifle / the Monthly Gundam A magazine pack in HG Long Rifle?
@crystalclearchaos5387
29 күн бұрын
Will you get the ver unicorn version of this sinanju stine
@aaronchesko7491
5 жыл бұрын
Mecha, I broke the peg to the left hip on my rg unicorn, what should I do to fix it?!?
@sleepingforest3979
5 жыл бұрын
It beautiful so beautiful 👌👌👌.
@jamesevans7056
3 ай бұрын
Which other kit(s) have the same bazooka weapon?
@kidultchannel
5 жыл бұрын
I just built hg sinanju, so I probably not going to buy this kit soon, but those improving articulation is good. Articulation of Sinanju was my only complain.
@joeydahl9594
5 жыл бұрын
Hey Mecha Gaikotsu, I think you had a MG Gunpla about to fall over on your shelf. Also I was curious are the arm and hip attachments similar to the Moon Gundam? or are they different.
@MechaGaikotsu
5 жыл бұрын
They need a bit of a rearranging. At least it’s not like living in Japan, where all of your kits are subject to falling over all the time because of the quakes. As for the moon I’m not sure as I’m not near it right now
@meleeorange
5 жыл бұрын
yus this is my Christmas gift!!!
@vedajanitra8199
5 жыл бұрын
Can you use the bazooka on RG Sinanju rifle? because if it can, then i’d rather get this kit instead of the expansion pack
@shanepuckett5198
5 жыл бұрын
It’s nexts to mg amazing red worrier
@jimbojambo69420
5 жыл бұрын
Noticed it on the shelf because of those big ass thrusters
@Mitcheltron
5 жыл бұрын
The Stein on the shelf was next to the Age Titus
@nnitrozeus1053
4 жыл бұрын
FINALLY! AN HG WITH A BUTT FLAP!
@tekkadan097
5 жыл бұрын
So it seems my project will come to fruition
@soundywaivy
5 жыл бұрын
Wut project?
@tekkadan097
5 жыл бұрын
@@soundywaivy i'm combining this kit with the back pack of the 00 sky (including buster sword and beam rifle), the beam rifle, shield of the star build strike on the right arm, and mabey parts of the universe booster on the back, the V fin of barbatose lupus, and possibly the kampfer amazings binders, with the kampfers weapons inside them, on the legs
@FILMBIONICX
5 жыл бұрын
The basuka is the weapom of the Optimus Primer
@pedrocabral598
5 жыл бұрын
It's the Best sinanju i ever see
@archmage4ever
5 жыл бұрын
Hey man! Love your Gunpla videos. I'm choosing one of two Gundams for my next purchase. The Sinanju Stein in this video, or the HG Freedom Gundam (REVIVE). Which one would you choose?? :) Cheers!
@sapphicquartz
5 жыл бұрын
Is it the on the 3rd shelf in the right middle?
@aleccap5946
3 жыл бұрын
What other kits could you use to beef up this 1/144 Sinanju ?
@fauxvier8519
5 жыл бұрын
I even paused the damn thing and still couldnt find it lol. Its a good idea tho this spot the robot thing, it was real fun.
@sapphicquartz
5 жыл бұрын
Omg love your vids
@tionuvolari
5 жыл бұрын
What did you use to paint the sleeve details?
@dontworryboutit7120
5 жыл бұрын
I see the phenex ohhh I’m excited... also should I get the HG stein or the MG Stein? I want the HG for its performance and it’s wrist and chest piece, but the MG for its all white color. Wut do?
@Goosh342
5 жыл бұрын
The hg is cheaper, the mg is better and bigger, depends on how much money and time are you willing to spend, also it depends on which design you like
@shakespeareanim
5 жыл бұрын
Obviously, you should get both.
@Goosh342
5 жыл бұрын
@@shakespeareanim also a good option
@LatencyProblem
5 жыл бұрын
Thing to remember about the MG though, the hands use the same fully articulated hands as the RX - 78 2 ver 3.0 so it's going to have trouble holding up its hugeass rifle. Otherwise, the kit itself is absolutely brilliant.
@jackhawk89
5 жыл бұрын
This is just like the sinanju
@No-lk3hy
5 жыл бұрын
2.39 is it the gundam on the third tier the one third from the center
@Jy3t
5 жыл бұрын
It’s on the third shelf
@harunhebat6374
5 жыл бұрын
Can't wait for the phenex review
@morgannorris2516
2 жыл бұрын
I would paint this sinanju blue because I think it would look better
@anus6896
3 жыл бұрын
now that’s a good Sinanju
@fishpop
5 жыл бұрын
How long before the P-Bandai release of Unit 1?
@gudakoalter
3 жыл бұрын
can the bazooka fit the RG Sinanju's rifle?
@inquesta620
5 жыл бұрын
before we know it we'll see him in a Harder-Steenbeck airbrush painting like a pro
@notgbb
Жыл бұрын
3rd shelf on the right The 3rd mecha
@rolichong1985
5 жыл бұрын
What paint did you use
@memoktc
3 жыл бұрын
when will you do a comparion with the HG sinanju and the Sinanju stein. Does the bazooka work with the HG Sinanju
Пікірлер: 344