Didn't shown leakage current during test How much leakage current?
@ElectroGlobe1
5 ай бұрын
Leakage current was around = 0.5 mAmp
@syedimam8261
5 ай бұрын
Thanks
@pradeepraghavan2109
9 ай бұрын
Thanks for sharing...very informative topic and well explained
@ElectroGlobe1
9 ай бұрын
Thank you for the comment
@motivatednandu
Жыл бұрын
But when you apply DC voltage to primary of transformer you will get 0 output so how can you apply voltage
@ElectroGlobe1
Жыл бұрын
Converters and inverters are used to transform AC into DC and vice a versa. At transformer ends only AC is applied. Transformer does not work on DC current.
@karingulasrinivassrinivas4515
Жыл бұрын
Super 👌 sir your explanation is very good
@ElectroGlobe1
Жыл бұрын
Thank you for the comment.
@OmkarNikam-q5p
7 ай бұрын
Sir if you break it down to its components, How does your test transformer can produce up to 60KV of voltage from 230 volts. please explain.
@ElectroGlobe1
7 ай бұрын
By using Transformers.
@jims9916
5 ай бұрын
Thanks. In my Hipot Kit for DC, In the diode how much oil should be there. In our case it is 50%. as there is a small hair line crack at the top of diode. is it recommended to test when the oil in diode is only 50%. What oil is used to top up. Thanks
@ElectroGlobe1
5 ай бұрын
Thank you for the comment. It is advisable to refer to the manufacturers manual.
@chaudhrymujeebali7565
Жыл бұрын
its really good information to understand Hipot testing
@ElectroGlobe1
Жыл бұрын
Thank you for the comment.
@nerosmero1183
11 ай бұрын
Thanks for sharing this great experience. One question: How much the Hi-pot test results should differ between old and new cables? Regards
@ElectroGlobe1
11 ай бұрын
Thank you for the comment. Either old or new cable, the high pot results such as leakage currents, voltage withstand time, should be as per the standards.
@nerosmero1183
11 ай бұрын
@@ElectroGlobe1 what about the test voltage values?
@ElectroGlobe1
11 ай бұрын
@@nerosmero1183 In the video reference standards are mentioned for test voltage values.
@tamilchelvanramasamy8733
10 ай бұрын
Lucid and elegant!!!!!! Thanks Sir
@ElectroGlobe1
10 ай бұрын
Thank you for the comment.
@syedaijazmohiuddin5237
Жыл бұрын
Sir, at end+ 1700 I am not getting please explain
@ElectroGlobe1
Жыл бұрын
The Values are as per the standard.
@evervasquez2489
10 ай бұрын
Cuales son las valores maximos de corriente fuga o cual es el standard
Пікірлер: 30