Thank You for a very nice detailed video! Answers a lot of my build questions. Now on to building mine.
@billbershinsky4304
Жыл бұрын
I'm glad it helped and I look forward to seeing your build once you get it done.
@sonnypaku8520
8 ай бұрын
Hi I built a hive lift following your design I kinda changed the base set up only because of other designs I have seen on KZitem also the simplicity of building, Otherwise thank you for your KZitem build design I based my project on your guide lines and I will try sending pics of my finnished results ty from New Zealand 😅
@billbershinsky4304
8 ай бұрын
Sonny, it’s nice to hear from you and yes the build of the hive lift isn’t complicated at all. I’d love to see your pictures when you have them.
@thilltony3362
Жыл бұрын
Excellent! I might make one of these. Would be very helpful, as I get more and more hives. Thanks again.
@billbershinsky4304
Жыл бұрын
I'm excited to use it throughout this year and especially during the harvest because I use bee escapes and to be able to lift the honey supers up and place the bee escape between the brood boxes and honey supers will be much easier not to say pulling the suppers, putting them on the trailer, and delivering them to the honey house. This last year the honey harvest was hard on the back without the lift. Also I can weigh the supers as I take them off and have a good idea how much I will wind up with. Thank you for your comments and good luck on your build!
@danlieter5673
Жыл бұрын
Excellent, exactly what I was looking for. Great job by the way
@billbershinsky4304
Жыл бұрын
I'm hoping to do a blog on the build and cost this winter. I'd love to see your build when you get it done.
@shawnzilla83
Жыл бұрын
You are legendary. Thanks for sharing so we can try one out.
@billbershinsky4304
Жыл бұрын
Ha, definitely not you must be talking of Mike Berry! I plan on a 4.0 that I think will be a little bit better design and I will be making blogs on the build. Good luck on your build.
@MikeBarryBees
Жыл бұрын
Well, there ya go. Nice review. You know what I think…have fun with your restoration project!! 🛻
@billbershinsky4304
Жыл бұрын
Thanks Mike it's going slow but I'm in no hurry. I'm actually in the process of building hive lift 4.0 and building jigs to speed up the build. Who knows maybe I'll get one out for you to try.
@vikchem
7 ай бұрын
I used unistrut parts. My lift able to lift one barrel 55gal with water. Little overkill for hives, but I lke it.
@billbershinsky4304
7 ай бұрын
That’s great! I’ve found many other uses for mine such as moving big flower pots in for the winter and things like that. Happy bee keeping.
@littlerock7491
Жыл бұрын
Great design! The best one I have seen. I do not do welding, so I wonder if you would consider making the frame for sale. I can buy the winch and battery locally to add to it. Thank you for sharing.
@billbershinsky4304
Жыл бұрын
I'm going to look into doing some production and see what that will take. Once I figure out if I can do this and maintain the hives I have I will be able to see if I would want to market them. Thank you for your comments!
@babbydj278
Жыл бұрын
Very nice
@billbershinsky4304
Жыл бұрын
Thank you! I am planning a build blog for Hive lift 4.0.
@Ebaybow
10 ай бұрын
I just got the El evator for the base of the lift project.
@billbershinsky4304
10 ай бұрын
That's great I would love to see it when you get it finished.
@benjaminvazquez1606
8 ай бұрын
Good job man, it has been 9 months since you posted this video so, my question is do you have any build to sale yet I would like to buy one and try it I have 80 hives and that would be a back saver please let me know something. thank you.
@billbershinsky4304
8 ай бұрын
Hey Benjamin, we have become snowbirds and are in Florida until the end of March. I don’t have the equipment here to build the next generation hive lift but hopefully will be able to do it when we are back. I’m not sure where you’re located but we are in northern Colorado. I think this hive lift would help save your back. I’m hoping to do a blog with a step by step and materials to build it. Happy bee keeping!
@benjaminvazquez1606
8 ай бұрын
Thank you for responding so quick I'm in North Carolina.
@petermorris131
Жыл бұрын
Good video I made a comment on the previous video. How many inches up from the bottom is the lower cross bar, and how many inches up from the bottom is the upper cross bar for the wheel carriage ? I'm going to make one of these hive lifters. You are good inspiration ,job well done and also do you need a special lithium battery charger
@billbershinsky4304
Жыл бұрын
Thank you for the comment, from the bottom of the frame it is 2" to the center of the lower arm and 20" center to the upper arm for the wheels. I would like to see your lift when you finish up.
@rorybardell6303
Жыл бұрын
Where can I find the bearings that is the only thing I need thx
@billbershinsky4304
Жыл бұрын
Hey Rory I got mine from Amazon uxcell R4AZZ Deep Groove Ball Bearing 1/4-inchx3/4-inchx9/32-inchShielded Z2 Lever Bearings 10pcs Good luck on your build and please share it with me when your done.
Пікірлер: 27