Very nice looking gun. I own a VP9 and noticed the more you shoot it the better the trigger gets. So have fun with your new toy.
@dennis1979gm
6 жыл бұрын
Thanks man. Enjoy yours as well!
@mytquin7605
6 жыл бұрын
love my hk vp9 and the only pistol i have that has a better trigger is my walther ppq m4 tactical.
@ChuckConnorsMM4L
7 жыл бұрын
That is a sweet looking pistol! It's been on my list for a while.
@dennis1979gm
7 жыл бұрын
+Chuck Connors so far its been pretty cool. I like it. Really makes it easy to see the dot with the RMR. And the grip is like shaking the hand of an old friend that you haven't seen in a while and highly respect! Lol
@gerryh9851
Жыл бұрын
Perhaps you should Try the BaldR Olight
@Mike-cu6gk
5 жыл бұрын
Thanks for the video. Do you still like the way it turned out ( meaning the slide) and does it still run good? I really want a VP9 with the optic .
@dennis1979gm
5 жыл бұрын
Yup still holding up and running good! Still very happy with it.
@NeonVars
7 жыл бұрын
I had this exact same setup on my Vp9 but I had to take the heinie rear sight off and replace it with the stock night sights. Absolute co witness obscures too much of the sight picture but it works for others. RMR+vp9=laser
@dennis1979gm
7 жыл бұрын
+RENZ sweet man! I did notice is it a bit higher in the sight picture than my glocks seem to be. Doesnt swem to bother me but I dont have a ton of time with it yet.
@johnnylox0823
3 жыл бұрын
Sweet gun pal!
@dennis1979gm
3 жыл бұрын
Thank you!
@johnwhite5575
6 жыл бұрын
I like that setup....I'd love to pick up a VP9 myself
@dennis1979gm
6 жыл бұрын
It turned out pretty nice. I can tell you its easier to find the dot when your learning to use an RMR than a Glock. Gun has ran great.
@scottf.3808
7 жыл бұрын
Very nice set up as ready to rock n roll....Good stuff...
@dennis1979gm
7 жыл бұрын
+Scott F. Thanks Scott!
@Kornholeeoo
6 жыл бұрын
I just ordered the same sights. HKparts.net has it for over $150. Found a new set on Ebay for $135 and $3 shipping. They'll be in in a few days and I'm sending it off for milling. The guy I use can put the milling for the RMR on the rear and cut new rear sight dovetail for mounting rear sights in front of the RMR. With cerakote and both milling it is $130. $90 for the RMR milling/cerakote and $40 to cut the new rear sight dovetail. He only shows it on a Glock but has that option listed for the VP9 as well. Thought about having the rear sight in front of the RMR for ejection purposes. Don't want a spent shell cracking the lense and having it back just a tad farther seems like a good idea. Just don't know if he cuts a dovetail for a Glock style rear sight or if the Heinie rear sight would work. Have to measure it all out. SAS Tactical is the site where I'm having mine done. The customer service is fantastic. Great video and thanks for sharing.
@dennis1979gm
6 жыл бұрын
+Kornholeeoo cool man! I thinkyou will be more than happy with it when you get it back! If he does cut the rmr in the rear and sight in front i would think he would have to cut a glock dovetail in it. The HK cut would be to big I think to be able to work that way. I maybe wrong on that? Either way i think you will like it! The HK has a faster learning curve finding the dot in the RMR do to grip angle and fast to pick up.
@scuddrunner1
3 жыл бұрын
Dennis, Great video! I have the same setup with a VP-9 2020, The only thing I don't have is the taller iron sites. Do you like them and where did you get them? Gun looks bad ass!!
@dennis1979gm
3 жыл бұрын
Thanks! Yes I like them because the co-witness in case the RMR fails for some reason. I got them at optics planet. They are pretty spendy but I do like the piece of mind that I can still aim if the dot goes down.
@jakesmith2515
5 жыл бұрын
Nice setup man. Good video.
@dennis1979gm
5 жыл бұрын
Thanks man! Its still runnig good!
@boofingdragon
6 жыл бұрын
I need this for my vp9, sweet rig
@dennis1979gm
6 жыл бұрын
Thanks man!
@BinkieLarue
5 жыл бұрын
Love the setup, I would like a little more info. What mounting plate did you use for the sights and how is it attached?
@dennis1979gm
5 жыл бұрын
I sent the slide out for machine work so no plate other than a battery seal plate. I think primary arms will do VP9's. Once its machined it set down in the slide a bit and is held down by 2 mounting screws. Very solid.
@DavidHanSin
5 жыл бұрын
Does the gun lock well into the holster without the light as well? I like your set up however I don’t think I will always carry a light. Just wanna know before I make the purchase.
@dennis1979gm
5 жыл бұрын
No it needs the light on this holster to stay in it correctly. I think in this case with a big light like a TLR you would need 2 separate holsters if you want to run it without the light.
@tdo7125
6 жыл бұрын
Sweet setup
@dennis1979gm
6 жыл бұрын
Thanks man!
@_PARADOX_Fy
6 жыл бұрын
The setup is sweet ... hows the recoil... I’m interested in the vp9sk but I’m a Glock fan just waiting on my day of for I can go check it out ?
@dennis1979gm
6 жыл бұрын
+AP HD i enjoy my glocks as well. I would say recoil impulse is very similar but the trigger does take a little getting used to coming from a glock. Its good just different.
@Pew_Meister
6 жыл бұрын
Very nice! Just got a VP9 Tactical in this week and plan on having an RMR milled on it eventually. Also looking at holsters. How’s that thing carry with the TLR? I’d love to put my TLR-1 on mine but dunno how bulky it would be IWB. I figure it could at least be doable in the colder months though.
@dennis1979gm
6 жыл бұрын
+Grego1776 its not bad with tlr. Holster selection is definitely key! Look in to burly man or t-rex arms. Both quality choices.
@Pew_Meister
6 жыл бұрын
dennis1979gm thanks! I actually have a couple T Rex Arms sidecars, although not light compatible. They’re great holsters
@faariskahn3660
6 жыл бұрын
That doesn't look like grey or green or dark earth where did you get that option? And is caspian option avail with the vp9sk
@dennis1979gm
6 жыл бұрын
Its the factory grey direct from HK. Maybe the lighting makes it look a little of? I dont know what the caspian option is? A complete slide or something?
@5jjt
3 жыл бұрын
Are you still using the VP9, or have you stepped up to something else? Thanks for the video.
@dennis1979gm
3 жыл бұрын
Yeah I still have it. I dont carry it as much lately but its still running 100% and no issue's at all.
@5jjt
3 жыл бұрын
@@dennis1979gm I asked because I just bought my first handgun, a P30SK, in June of 2020, and am attracted to just abut every other pistol I see and wonder if guys jump from gun to gun. I've tried Glock, which I really like due to aftermarket support, Canik--I couldn't get my thumb knuckle comfortable with it, M&P--the external safety was horrible to shoot with, polymer 80--the lines are a bit too straight, but nice overall, and the P30SK is really nice for its size and shoots like a bigger gun. I don't see getting rid of the P30SK for quite some time, if ever. Yesterday I shot a full size Walther and felt the P30SK felt easier to shoot, less recoil. Does the V9SK shoot like a bigger gun too?
@MSKommando
6 жыл бұрын
What is better for you? To have the rear sight infront of the RMR or to have it behind the RMR?
@dennis1979gm
6 жыл бұрын
+MSKommando well i just had a gen5 19 done with the rear sight in front of RMR. I only have about 500 rounds threw that setup at this point but i can see the advantages of it. I would say it would be a shorter learning curve for someone just trying out an RMR. After a bit more time with that setup I think it will be the way I will prefer. Rear sight in front of RMR.
@MSKommando
6 жыл бұрын
First thx for your answer. My second question is: Is it even possible to get the RMR behind the rear sight? Because when i look on my VP9 then i see that the cut outs of the rear sight is staged two times. I think its even more hard to mill it out in the right way or? (sorry for my bad english skills)
@dennis1979gm
6 жыл бұрын
+MSKommando i haven't seen anyone do it that way on a VP9 yet. It would be possible if they cut a glock style dovetail maybe? Since the sight is thinner? Good question.
@Arabtone
4 жыл бұрын
MSKommando has anyone ever ended up doing it. Rmr behind the rear sights ?
@mariov2596
6 жыл бұрын
Is that cut just for a rmr or can you put a micro with adapter in it?
@dennis1979gm
6 жыл бұрын
+Mario V this cut is RMR only.
@BloodySoup74
5 жыл бұрын
Great Video!! Ever think of getting a lazy wolf trigger installed or do you still like the original trigger?
@dennis1979gm
5 жыл бұрын
Original trigger is pretty good. It had a little grit in it but seems to be cleaning itself up the more you shoot it. I don't mind the factory trigger at all now.
@BloodySoup74
5 жыл бұрын
@@dennis1979gm Thanks for the feedback! I have about 5k rounds through mine and its a nice trigger all around. I have long fingers and i like where the trigger stops when I pull it compared to others. I don't have to minipulate my finger further inward toward the back of the trigger gaurd causing pulled shots.
@zm6471
5 жыл бұрын
How has that RMR cut held up for you? Looking to have the same thing done to a vp9
@dennis1979gm
5 жыл бұрын
It's been perfect. Nothing has moved or anything. It's still as solid as day 1.
@zm6471
5 жыл бұрын
dennis1979gm good to hear! Looking forward to this build. Has the RMR caused any reliability issues with cycling or anything?
@dennis1979gm
5 жыл бұрын
No none whatsoever. I've shot all grain of bullets from 115, 124, 147 from cheap stuff to federal hst and all have performed flawless
@zm6471
5 жыл бұрын
dennis1979gm that’s awesome. I can’t wait
@BlackLionVlogs816
6 жыл бұрын
Update after more range time with rmr? Hows it working out?
@dennis1979gm
6 жыл бұрын
They are all working 100%. No issues at all so far. At this point I have probably 5k+ rounds threw RMR guns and they are great! The VP9 is easier to find the dot for new RMR shooters I think because of the grip angle. Glock does take more time to learn on but both are equal after the learning curve is done.
@awokeone7997
6 жыл бұрын
Can I have the info for the guy who did the milling on your slide?
@dennis1979gm
6 жыл бұрын
+awoke one www.mkparmsusa.com Thats his website. Does good work for a good price. I think you will be happy with his work. I was!
@awokeone7997
6 жыл бұрын
dennis1979gm. Thank you man and good review!
@civhonbmm3
6 жыл бұрын
You got the VP9 in California?
@dennis1979gm
6 жыл бұрын
+AnMSpec yeah. A bunch of people do. Their was multiple ways to get them in CA. Now its down to PPT, LEO or out of state gift from an up or down relative.
@rmack4918
6 жыл бұрын
Links!!! Can’t find NKP Arms
@dennis1979gm
6 жыл бұрын
Mkp arms. Hopefully this link works. www.mkparmsusa.com/
@10DCSO
6 жыл бұрын
Dawson Precision also has suppressor sights. Had my VP9 milled by landmprecisiongunworks.com. He also put the sights on for me. Did an amazing job.
@dennis1979gm
6 жыл бұрын
+10DCSO i didnt know about the dawsons. How do you like the rmr so far?
@justinim9389
6 жыл бұрын
I kinda like how they have the sight on the adapter. Do you know what kinda sights the dovetail is cut for? Doesnt look like the regular vp9 cut.
@dennis1979gm
6 жыл бұрын
On mine I ordered the Heine straight 8 suppressor sights. These are just standard vp9 dovetail sight. When the slide was cut for the RMR nothing was cut into the factory dovetail. It's all factory. They fit good and cowitness perfectly.
@JustinIm27
6 жыл бұрын
dennis1979gm nice! Im thinking about getting that exact same setup. I was curious about the sights they put on at l&m. I noticed they use a different approach.
@Spiederia
6 жыл бұрын
Good bedroom gun. Worthless carry gun.
@dennis1979gm
6 жыл бұрын
+Swiss Watch Craze what did you base that on? Just curious?
Пікірлер: 72