We'd like to see documentaries/how it's made or longer versions. This is Fascinating stuff!
@TheRoyalHabibah
2 жыл бұрын
Me too
@rocketmanandrew
2 жыл бұрын
Me too
@catzzzz1450
2 жыл бұрын
Me too
@kowalski1582
Жыл бұрын
Me too
@ovepayne
Жыл бұрын
More and longer videos, please!
@StubbyPhillips
2 жыл бұрын
So this is a rebuild of the one that had the little "whoopsie-doodle?"
@catzzzz1450
2 жыл бұрын
Yes
@BatteryAcid777
2 жыл бұрын
yes, funny how they don't mention that
@Bluescanian
2 жыл бұрын
@@BatteryAcid777 Why would they, it's not very good marketing. I doubt that they would deny it if you asked about it
@KriegerDelfin24
Жыл бұрын
@@BatteryAcid777 it was not the fault of liebherr but the fault of the Hook manufacturer,
@MrDivi1988
Жыл бұрын
@@KriegerDelfin24 And also it was on load testing where it "failed". I think it is better to have this type "failure" at testing.. than lifting something what is not that easy to fix anymore.
@JAGER_offduty
2 жыл бұрын
So happy to see this monster finally rise again! Good job liebherr, show them that you learn and improve from failure!
@Mark-em5zm
Жыл бұрын
It was a hook failure that was made by a different vendor.
@zaxisontherun1650
4 ай бұрын
This crane deserves its own documentary
@Un7kat
2 жыл бұрын
Proud to be a part of Liebherr!
@Chris-yk5rm
2 жыл бұрын
Glad to see its back after the hook failure!
@Erik-gg2vb
Жыл бұрын
Always make sure the lifting hook is tested beyond its capacity before install on such a beautiful crane.
@karlmckinnell2635
Жыл бұрын
Seems like a good idea to have the hook tested in a manner where failure would be less expensive and not lead to extensive repairs and delays.
@TwoToneTuna
2 жыл бұрын
A little comparison of the crane before and after would be nice. Liebherr has made some changes to the design to make it more resilient. It would be great for you to show them demonstrating what you have learned and the expertise involved. It has to be sure that some of these innovations would improve designs everywhere.
@mx2000
3 ай бұрын
I don’t think it is that complex. They added a structure on the tower that keeps the crane arm from going over vertical.
@sebastianmuller1210
Жыл бұрын
Hopefully the hook is keeping up this time. Would be nice to see this crane help the power transition away from gas.
@СергейВладимирович-ф3щ9ж
2 жыл бұрын
Надеюсь поставщика главного крюка заменили
@marvinmeins
2 жыл бұрын
So, this time without a crash?
@copperkop
2 жыл бұрын
kzitem.info/news/bejne/0GepnW2LpGNhh3Y
@michaelmccarthy4615
2 жыл бұрын
Any video of the crash ?
@simionalexandru9546
Жыл бұрын
First version installed with Turkish cheap cables felt down a few hundred meters from my location and it was a disaster. Glad no one got hurt
@sky173
4 ай бұрын
Is this the crane that failed during a test? What was the reason for the failure and what broke that caused it to fail? I'd be curious to know.
@LiebherrGroup
Ай бұрын
Hello, thanks for your comment. We have published the entire story on a special website. Please feel free to have a look at it. www.liebherr.com/en/deu/magazine/hlc/hlc.html
@jascollinscork
Жыл бұрын
Unreal 🤯 😍 heard something like this working off the coast of 🇮🇪 at wind farm but can’t find pictures of it😢
@kabosu858
2 жыл бұрын
完成おめでとう🎉活躍を期待してます!
@jenson8539
2 жыл бұрын
Wonderful
@masekobaen
2 жыл бұрын
super strong
@Sir.Fisher
2 жыл бұрын
How long before you break this one ??
@BatteryAcid777
2 жыл бұрын
someone at Liebherr is till chained up in the basement as a punishment for that little whoopsie
@Niidforseat
2 жыл бұрын
Cool crane, nice short video. But I don't like you act like nothing happend before. If this crane "comes in the right time" you mean "two years too late"? Come on Liebherr, you are bigger then one failure, but I would have prefered if you would have just told by a few words that your first try failed.
@LiebherrGroup
2 жыл бұрын
Many thanks for your comment. Of course, we are not acting like nothing has happened. We have even published the entire story on a special website. Please feel free to have a look at it. www.liebherr.com/en/deu/magazine/hlc/hlc.html
@irondarknessdarkness8900
2 жыл бұрын
@@LiebherrGroup so that is a pair of whiplash shock absorbers up there on top now? that is a fair solution for minimizing damages i think.
@longtac0117
2 жыл бұрын
@@LiebherrGroup Hi can you tell me have you had any other hook failures ?
@radoslawglebicki1975
2 жыл бұрын
Is that same crane where "chinese high quality" hook failed?
@BatteryAcid777
2 жыл бұрын
yes, but i think they built a new arm (the big red and white thingie)
@warjunky14
Жыл бұрын
So are we just not going to talk about the ELEPHANT IN THE ROOM?!
@ph11p3540
6 ай бұрын
Fishing rod is fixed and good as new. Never use cheap fishing weights
@Halley-qs4qr
3 ай бұрын
Diese vielen Bilderwechsel sind furchtbar. Fenster schließen.
@eurasius1234321
2 жыл бұрын
😲
@Okde522
Жыл бұрын
断臂王
@nigelvankoert1619
2 жыл бұрын
Just like the energy transition building a decent crane in one go, which isn’t rocket science, also appears to be very challenging…
@cezarycezary5119
5 ай бұрын
zepsul sie w 2020
@doodlegassum6959
2 жыл бұрын
This is great news. Now the dickheads hanging around my crane can piss off the next biggest thing.
@appercumstock3017
2 жыл бұрын
Why not more tech content and not just the marketing stuff
@fredorji1
2 жыл бұрын
isnt this crane the one that failed ?
@sugershakify
3 ай бұрын
Round 2 .... and technically the block (not made by Liebherr) failed, not the crane.
@Muh_Riz
Жыл бұрын
apakah ini crane yang waktu itu insiden sling putus?
@Toasti100
Жыл бұрын
Isn't that the crane that had an accident in Rostock?
@catzzzz1450
Жыл бұрын
Yes
@MrAstrojensen
Жыл бұрын
Is this the crane that has been used to erect wind turbines near Bornholm this summer? I saw one in Rønne harbour that was strikingly similar to it, but my photos are taken from too far away, so I can't say for sure whether it was the same or just a very similar one. In any case, it was gigantic!
@LiebherrGroup
Жыл бұрын
Dear MrAstrojensen, that’s totally right. At the Arcadis Ost 1 wind farm in the German Baltic Sea, the HLC 295000 was used to install 28 monopile foundations. Best regards, Liebherr Maritime Cranes
@ryanburbridge
2 жыл бұрын
How about we get the video titled “fall of the 1st titan”?
@michaeljanssens893
4 ай бұрын
What project was the top site and jacket part of? Very possible we made the jacket
@LiebherrGroup
Ай бұрын
This project was the second major operation for the HLC 295000 in mid-2022, installing a substation for the 500 MW Fécamp offshore wind farm off the north-west coast of France. In total, two large components were installed, a 1,300 tonnes jacket, as well as the 2,200 tonnes topside. The Fécamp offshore wind farm will generate electricity equivalent to the power needs of more than 770,000 people.
@JoeFranklinLucas
Жыл бұрын
There's about 15 seconds of actual information in this video.
@michaelmains6785
Жыл бұрын
5000t lift capacity. Unreal
@Kpraveenhere
7 ай бұрын
Where are counterweight
@zaxisontherun1650
4 ай бұрын
There are no counterweights
@LiebherrGroup
Ай бұрын
Dear @Kpraveenhere, thanks for your comment. To keep it short and simple: The usual counterweight on this crane and the Orion is managed via the filling and emptying of the ballast tanks, depending on whether the load is being picked up or set down.
@taylorjeffords1719
2 жыл бұрын
Can yall put a bucket on it to mine coal?
@BatteryAcid777
2 жыл бұрын
why didn't you mention the time the hole crane collapsed during a overload test?
@LiebherrGroup
Жыл бұрын
Dear Tau1s, Many thanks for your comment. Of course, we are not acting like nothing has happened. We have even published the entire story on a special website. Please feel free to have a look at it. www.liebherr.com/en/deu/magazine/hlc/hlc.html
@JohnDoe-es5xh
2 жыл бұрын
I love LIEBHERR cranes. The older ones I can remember from the Iran, where many leftists were pulled up into the sky.
@martynhanna2675
2 жыл бұрын
this is the one that failed massively ,check it out on youtube wow
@isaksundrapp
2 жыл бұрын
The crane itself failed because of slings on the load snapped, 5000+ tonn downforce suddenly gone does that to any crane...
@Kellethan
2 жыл бұрын
@@isaksundrapp no slings snapped nor was it 5000 tons. Hook from external supplier broke at 2600ton during process of full load test.
@shuyin9842
2 жыл бұрын
Not the crane failed. Be better informed
@shuyin9842
2 жыл бұрын
@martyn hanna
@Bawbag0110
2 жыл бұрын
Clearly you haven't looked properly into what happened and have only watched the video...The hook which was manufactured by an external company failed...Not any liebherr parts
@Idontwantahandle6669
Жыл бұрын
That is incredible.
@Collateralcoffee
Жыл бұрын
Sadly no word about the failure in Rostock...
@LiebherrGroup
Ай бұрын
Thanks for your comment. Of course, we are not acting like nothing has happened. We have even published the entire story on a special website. Please feel free to have a look at it. www.liebherr.com/en/deu/magazine/hlc/hlc.html
Пікірлер: 86