Great information!! Recently acquired a tyco set with cars in pieces. This will help me rebuild them. Thank you!!
@cncmillman1
3 жыл бұрын
wow,great instructions,my first tear down at age 64,thanks my friend
@vitoman50
3 жыл бұрын
Glad to help.
@kylofabian4579
3 жыл бұрын
you probably dont give a shit but if you are bored like me atm you can stream all of the new movies on instaflixxer. Been watching with my gf recently :)
@alijahcurtis9059
3 жыл бұрын
@Kylo Fabian Yea, been watching on InstaFlixxer for years myself =)
@DaveStarr4
2 ай бұрын
thank you for posting this very helpful information
@bigbuck4438
2 жыл бұрын
Thank you for this video!
@l.robertjones5806
26 күн бұрын
You're very perfect on your info as I'm a builder.
@Opry99er
4 жыл бұрын
Binge watching your videos! Thanks so much for sharing your knowledge
@vitoman50
4 жыл бұрын
Thanks for watching. Any time I can help.
@mzondi1970
7 жыл бұрын
I wasn't going to get any different models I was going to try to stay in the AFX family I have recently gotten for Tyco cars lol one 440x to wide pan one narrow and 2 Magnums I've heard these chassis are hard to set up then say a magnatraction is that true great couple of videos here
@DLG779
Жыл бұрын
you make it look easy
@MikeRemvidas
7 жыл бұрын
A lot of good info here 👍🏻 I just ordered poly's and some pick up's for a few 440's along with a scorpion 440. My track is mostly complete ! It's a lot smaller now but , more compact and lay~out looking. My 440's will not stick on turns without just about stopping so ... I'm hoping the mods work out for me. Thanks for the sub & will post a lay~out vid in the future along with my Hot Rod's 🏁 Thank you
@vitoman50
7 жыл бұрын
Mike Remvidas Thanks for watching hope the next videos will be a great help
@MikeRemvidas
7 жыл бұрын
I did install the level 10 traction magnets man,,,, 👍🏻 what a huge , huge gain in speed and fun !!! 🏁
@vitoman50
7 жыл бұрын
Nice! keep it up.
@terrysmith7071
5 жыл бұрын
Thanks, great video, very clear instructions
@vitoman50
5 жыл бұрын
Thanks for watching Terry
@beast1624
6 жыл бұрын
👍👍Great episode! Thank you!!
@JeffRogers99
6 жыл бұрын
Thank you
@vitoman50
6 жыл бұрын
Jeff Rogers: Glad I can help.
@lawrencee.whitewhite73
3 жыл бұрын
Hello my friend , I would like too see a ho wing body car , after you do your turn up.
@johndicks1250
7 ай бұрын
Just wondering do I need to take motor out to change traction magnets?
@stuffthings
Жыл бұрын
Can you tell me what you are doing with the scale around 4:02 in? How is that measuring the magnets?
@im5150247
Жыл бұрын
Help! lol, so, Iv'e got my wizzard storm all torn down to the barrel, on those do I also just yank on them with pliers? Also, 4 brushes came out, did they break in half, or, is there supposed to be that many? Thanx.
@vitoman50
Жыл бұрын
Sounds like they broke in half, if you put them back together they should work.
@im5150247
Жыл бұрын
@@vitoman50 Thanx, yeah, just got some new ones, and a 2.8 ohm armature motor, runs like a scolded dog!! Gonna use ur vid to help me drop the old armature in my Tyco narrow chassis!
@elston1999
6 жыл бұрын
Any tips on disassembling the 440 magnum? I got one and I wanna tune it up but don’t wanna destroy it
@vitoman50
6 жыл бұрын
Steve the tear down is straight forward like the Magnum 440x2 chassis but the traction mag is in by two ears. Stick a small screw driver under the mag on both sides and gently push it up past the ears. In reverse put the mag under the bulkhead and snap it back under the chassis ears.
@odinthor49
6 жыл бұрын
Hello, do you have a overhaul video on the AW Super 3 chassis
@vitoman50
6 жыл бұрын
Jorge Vadi no yet but I will be trying to get one started. Thanks for watching.
@Chappy31x
3 жыл бұрын
I know someone who is selling a Tyco 440 Magnum x2 NIB for $40. Should I buy it? I don't have a Tyco but I have AFX, Aramaic? from the 80's and new Life Like and They ran them recently at the slot car track
@vitoman50
3 жыл бұрын
You should. Not a bad price it In good shape.
@Chappy31x
3 жыл бұрын
@@vitoman50 New in the box Dale earnhardt
@calluslider7741
4 жыл бұрын
putting this back together is such a pain in the ass. the small magnets constantly stick together with the ones from the main part. also the spring just fall off permanently... any suggestions on that or a tear down - rebuild video?
@vitoman50
4 жыл бұрын
I put my two fingers on the magnets. I'll try to do a video on it.
@calluslider7741
4 жыл бұрын
@@vitoman50 Sorry, in the end I just did simply everything wrong that one could do wrong when building this thing back together I guess :D When you do it correctly, it is no issue at all. Thank you so much for the great video, it really helped me a lot in the process! Were my own mistakes that made it difficult.
@calluslider7741
4 жыл бұрын
What helped me in between was to put an extra small tire between the two magnets to keep them seperated, which is easily pushed out when you put the engine back in. Like in your video at 8:20 just in reverse.
@jamesdickey5407
7 жыл бұрын
I have a afx super speedway and I'm planning to get some tycos on ebay,there cheap and I want my kids how to work on slot cars
@vitoman50
7 жыл бұрын
james dickey cool get them involved young. Did this with my two boys great racer now. 15 and 18 keep watching for the rest of the videos. And thanks for watching. I race in scale.
@IshFarid
7 жыл бұрын
Happy Thanksgiving.
@vitoman50
7 жыл бұрын
Hope you had a Thanksgiving Ish
@vitoman50
7 жыл бұрын
Sorry Happy Thanksgiving.
@IshFarid
7 жыл бұрын
vitoman50 It was a good Thanksgiving Kevin. Hope yours went well too.
@frederickjones6931
7 жыл бұрын
How do I find the re-build . I have a bench full of bits !!!
@vitoman50
7 жыл бұрын
frederick jones It's going to be the cleaning video next Sunday and the rebuild the Sunday after.
@frederickjones6931
7 жыл бұрын
many thanks
@vitoman50
7 жыл бұрын
frederick Sorry to put you on hold like that, but I sometimes don't have the time to do a 30 minute video and edit it in one day. Thanks for watching.
@CharlesFlahertyB
7 жыл бұрын
This is with the new camera I assume?
@vitoman50
7 жыл бұрын
Charles Flaherty yep. how's it look? Thanks.
@vitoman50
7 жыл бұрын
Still figuring it out. Canon rebel t6i.
@CharlesFlahertyB
7 жыл бұрын
It looks great, very high quality. The camera really shines when shooting close in on small parts. The edits looked very professional. I'm super jealous, I'd love to get new camera.
@vitoman50
7 жыл бұрын
Charles Flaherty Using the 18-55 lens going to try the 55-250 next time so Connor can zoom down real close.
@vitoman50
7 жыл бұрын
Charles Flaherty Connor is doing a great job to. 15 years old and he's killing it. Filming, editing and telling me what to do.
Пікірлер: 54