I can't wait to see it run as well. Cute little thing with it's little paws flip flopping. Oooh and I'm very interested in this engine as well. For what it is, don't look bad. Good luck with these HK.
@rcskydivero
12 жыл бұрын
Finally she is coming closer to buy one , Keep up the good work !
@RcAndries
12 жыл бұрын
I love how normally a "Hobbyking Turbine" would make a classic joke... Can't wait for you to give it a spin go Bruce!! Gotta say I really like what hobbyking has become, you know that most things labeled "Turnigy" that come out now are just good!
@Tigratx
12 жыл бұрын
Nice looking turbine, I hope the prices will allow more people to get one, Once they have some decent time flying. Nice looking cat! He looks happy and well cared for :)
@richardwallinger1683
10 жыл бұрын
My original 54 mm turbine is pre Wren days and is continuing to run faultlessly after its maiden in 1999. Hover engine rpm in my 2m rotor dia Alouette is 111,000 .Still on it's original GWS 688 ceramic bearings .3% two stroke motorbike oil.
@jkr1100
11 жыл бұрын
Bruce, thanks. I own some products that you have reviewed for us. this is a great service you are providing for us.
@MormanHP
12 жыл бұрын
EXCELLENT presentation. My cat would have jumped in the box.
@vindis79
11 жыл бұрын
Interesting video. That's what I always wanted to see. Someone opening the box..
@sheko2000
12 жыл бұрын
can't wait for the testing video !!
@beaconrider
6 жыл бұрын
Thank you. I have never seen someone open and empty a box before now.
@sterby1
12 жыл бұрын
As far as I'm interested in RC stuff, especially in jets, the first time the cat got in the picture I immediately focused on him/her. I like cats.
@mgmarcio
11 жыл бұрын
Very nice package!! I hope it does not explode in the face of anyone!
@bisholim5377
9 жыл бұрын
I was really happy when he wanted to review the dam turbine, but I really dont think I have ever been so frustrated for any reviews as I have been for this one. Offcourse it isnt his fault if the turbine is faulty and he wouldnt tell us out of respect for Hobbyking, but a signal or something which would have tolled us not to wait, or its going to take longer time would have been really good...
@kevin-mehrenworth8400
6 жыл бұрын
It's called clickbait figure it out now? Money money money moneee.....
@MrTbone127
12 жыл бұрын
Nice bruce can't wait to see it all come together!
@m3lyc
12 жыл бұрын
Hmmm if they're cheap enough I might purchase one to spool up in the garden, I love turbines :D.
@XRMF1
11 жыл бұрын
Because most of us like to see how things are packaged and what should come in the box... It can also be used for warranty purposes if they need proof it wasn't damaged by use...
@Godscountry2732
12 жыл бұрын
Hobby king has has a very good business plan and it seems to be working,if they can keep the quality very high[this is a hobby,hobby's should not be stressful,the products should work]and prices ,which are very good at Hobby King.Lets hope they can reduce backorder's and so far,so good.
@docskyhook2
12 жыл бұрын
Can't wait for engine test 'Vid', Thanks!
@Lt599gy
12 жыл бұрын
I look forward to your review. If this product turns out to be of decent quality at a reasonable price then maybe that will spear competition in the market as far as pricing goes. I know that the materials used to produce turbines are expensive. I also know that the other companies producing on a mass scale could be more competitive with thier pricing and still make reasonable profits. It will be very interesting to see what happens.
@MrArrow1961
12 жыл бұрын
Looking forward to hear from you soon Sir, very interesting to know the results in next video.Be carefull please!
@johannesgoebeler2376
9 жыл бұрын
I love the video!
@richardwallinger1683
10 жыл бұрын
My Alouette turbine has been flying since 2000 and is still on it's original bearings . 2nd combustion chamber and second fuel ring.5mm Inconel vapourising sticks . and if you are a druggie free needles for the fuel ring.
@mastermotorsport
11 жыл бұрын
Congratulations for the work. Taste very of aeromodelling and always I go to look at its site before buying parts. With respect of the friends of Brazil. Victor Silvério Miguel
@vimanyudevgan8985
10 жыл бұрын
Will wait patiently for part 2
@whitehedr
12 жыл бұрын
Cant' wait to see it run!!!!!! RWW
@PHeMoX
12 жыл бұрын
Looks pretty well made actually. :)
@avugiak
8 жыл бұрын
Looks like a jetjoe and I got mine for 700$ back in 2008, so I know you can get them as low as 700$ and yes I still have mine to this day good turbine!
@gooniac33
12 жыл бұрын
Your review companiom was very interested as well!! Lol Good stuff! Can't wait to see what you find out!!
@hekikuu
12 жыл бұрын
Although too bad for experienced modellers, I reckon it's a good thing. Can you imagine how many people would start out with a turbine if it's even cheaper? It would harm our hobby big time. No, $1000 or more is fine. Let these toys be for the ones who've been flying for years.
@RickSteffey
12 жыл бұрын
Very cool, I hope these end up being successful and long living power-plants. I have thinking of getting into turbine powered aircraft....more like dreaming of owning a turbine powered Euro-fighter...dream may come true, come on HK.....Let's see an affordable & very responsive & powerful turbine. I would love to see the blades on the fan-unit...have you opened her up? Seeing internal components would interesting.
@OCMAMY
12 жыл бұрын
Can't wait to see what you have planned for it. Is that Mr. Wiskers Mate?
@JimmysTractor
6 жыл бұрын
I'm waiting for the upgraded one with thrust vectoring
@Chappo5150
12 жыл бұрын
Cool Kitteh!
@SleepEat3D
10 жыл бұрын
hehe your cat looks like the don of the house XD
@philg311
12 жыл бұрын
About time Bruce.
@Mordock999
11 жыл бұрын
Thanks for the video. Very informative.
@DeiselDemon
12 жыл бұрын
that looks like one fat happy cat! mine has to do a pre-inspection whenever I open a box.....
@lpbug
12 жыл бұрын
Exactly, I'm saying regulations should be placed on the sale of turbines in general and not just specifically Hobby King.
@MrWhhaaaaat
12 жыл бұрын
You should sell all that fancy stuff in the background for more airplanes! :D
@FPVnAround
12 жыл бұрын
cant wait for the tests!!
@williamsantiago7303
6 жыл бұрын
Hey great video, very informative. Thumbs up on the video. I love your kitty cat. Beautiful kitty.
@xXGH0STEYEXx
12 жыл бұрын
Your cat is awesome!
@Osse22
11 жыл бұрын
nice kitty, looks like it was interested in the box more than the engine : )
@softdown123
12 жыл бұрын
Haha, the cat is adorable. You should have him/her in all your videos ! :)
@LibertyLakeWildlife
12 жыл бұрын
The cat is thinking ...."Strange can for tuna."
@MrJonnymellor
12 жыл бұрын
Bruce run her up soon,like tonight,can't wait!
@pavcon
12 жыл бұрын
Though i got my own complaints from hk i completely agree with your statement.
@HugeVictor
10 жыл бұрын
How come there was never a second part of this?
@trevor5290
7 жыл бұрын
Because Old Man Bruce couldn't get it going. But rather than let us know.. he decided to keep us in suspense all the while promoting his own channels and sites. A pretty sleazy thing to do.
@jesus_wasgay
7 жыл бұрын
uhm, there are no second parts to basically anything on his channel, but I still love his videos and the inexhaustible optimism!
@CharlieBriggsUK
12 жыл бұрын
Great bit of kit, a slightly larger version of that could be put on top of a real glider! Might just about be able to gain altitude with it
@silentrac
12 жыл бұрын
Cant wait for more of this :)
@007bravedave
12 жыл бұрын
I've got a foamie that this engine would go nicely in...! The power to weight ratio would be fabooolous ! And the longer the engine ran, the lighter the airframe would get! Self igniting afterburner effects built into the design ! Whatcha reckon Bruce? ...pppfffttt...
@ImYourGuiltyPleasure
12 жыл бұрын
I honestly thought this day would never come and had written off the HobbyKing Turbine as a myth. You have my UTMOST attention! How on earth did you get "in" with HobbyKing good enough to get this prototype? Any projected thrust or RPM numbers? Weight?
@jacebigelow
12 жыл бұрын
Good video, thank you for posting !
@pauls5745
6 жыл бұрын
2:30 kitty wants a look-see too!
@yeogav
12 жыл бұрын
nice lamp shade
@WarblesOnALot
12 жыл бұрын
@RCModelReviews G'day... Wow, Bruce, I can't believe I'm only the 2nd commenter to realise that you're planning to FINALLY fit an AXN with a more powerful Pusher...! Yours, or Ronald of the Flurescent-Luminous Clan's..?(jokularis jokulii). Ciao !
@r22accipiter
11 жыл бұрын
Wow!!! I wish HobbyKink would ever deliver my LiPo batteries, for which I've long ago already paid. My first product order experience with them is not a confidence builder. ... Btw, I did check to see if the inventory was listed as warehoused within my own country. They bounce all of my email inquiries, never sent a shipping date confirmation or and tracking info.
@aeroangrymoose
12 жыл бұрын
Being a "budget" engine.. perhaps prepare some mitigation in case of turbine wheel seperation.. If it was me id set acouple cinder blocks on either side and wear a face shield for high power runs till you trust it haha.
@kiwibob72
12 жыл бұрын
While I'm not expecting it to be 'astounding' or anything, if the internals machining and fuel system is up to scratch, it's balanced and the ECU turns out to be a good one (i know I'm asking a lot), then it might actually be an OK option for folk with the turbine bug. Let's be patient and see how it actually runs before the "I told you so's" commence. Buy the way, you yourself have brought a few dud's in the past off 'cheap' outlets - right!?!?!? (that pusher prop gas thing for one)
@offshore911
12 жыл бұрын
perfect voice for an announcer!!
@MrJETMAN123
12 жыл бұрын
tipical, most people slaging it off before its had a chance,lots of good engines coming from the far east which have proven to be good engines i.e kingtec,ATJ, and others lets see how it performs and then give it some comments good or bad
@geoffroy588
8 жыл бұрын
Thanks !
@skimowhite586
12 жыл бұрын
I can see this ending in a CATastrophie if the cat is the one flying it
@desmogod
12 жыл бұрын
So how long does it actually take to bench mount a turbine and check out it's FADEC? And perhaps even start it?
@123jerro
8 жыл бұрын
Really???Ive got to watch an advertisment in order to watch an ad?
@arsitama
12 жыл бұрын
Use it on a RC Truck. Always love your video
@knowledgetime5686
5 жыл бұрын
If you don't supply the fuel to this jet so is there any effect on thrust? I mean thrust will decrease?
@melhemmussabouchabki
11 жыл бұрын
Good night! Friend, I wonder when it will be released this turbine, what it will cost, how many pounds she is, I would also like to know if you've ever made a video of the turbine working? I thank you for your attention.
@troydachef
11 жыл бұрын
awsome turbine, your cat must be agree.
@chrismillersrcfamily
11 жыл бұрын
Cool vid. Cute cat
@RoboTekno
12 жыл бұрын
A Hobby King Turbine? This is just asking for trouble D: :P lol Excellant review as always
@1inAtrillion
12 жыл бұрын
@mick7sp yes too much asbestos around the tail would increase drag, we could make a fire retardant suit for Puss made out of a Lipo Guard charge bag as you know how it is, SAFETY FIRST other wise the results could be CAT-A-STROPHIC !
@Toninho77
12 жыл бұрын
O gato tá de olho! hahaha Se tiver um preço bom, vai ter jato em tudo que é pista!!!!
@lorenzovanhethul1355
9 жыл бұрын
I think we can forget this turbo
@cuddles6938
12 жыл бұрын
Apparently you don't subscribe and watch his other videos whiich are helpful for those of us who want to learn things. I personally would use a big ass electric motor which should be plenty fast without all this extra work required.
@dphotos007
12 жыл бұрын
I believe at my local field here in Los Angeles you have to be checked out and qualified before they will let you fly turbines but not with any other planes.
@chuco425
12 жыл бұрын
Don't all turbines have to be pre-tested before they are sold, to make sure they are safe. Knowing they are powerful, how much thrust do you think it has
@stevenkindred9302
11 жыл бұрын
info required i,ve searched forums but cant find how to use trainer function on turnigy 9x i have 2x9x and cable but cant get to work help appreciated
@Ecosse57
7 жыл бұрын
good looking cat!
@lastreagandemocrat
12 жыл бұрын
I noticed you said that the engine smells like it's been previously run. Are you planning to NDI it before you turn it yourself? If so, that'd make a great video bit. Assuming HK would let you take video of the inner workings, that is...it is a prototype, after all. -Rich
@BeeZee2
12 жыл бұрын
We've all seen the guy who made his cat into a quad-copter... Perhaps a backpack turbine for Mr. Whiskers?
@1inAtrillion
12 жыл бұрын
cool - Bruce any idea on what the price of these possibly maybe ?
@weld4200
3 жыл бұрын
Was that a bong on tht shelf in the background ?
@e3dflyer
11 жыл бұрын
I have a feelling that it "blew", or video would have been posted by now!
@RoboTekno
10 жыл бұрын
Any updates on the HobbyKing Turbine? Perhaps upcoming ground tests? :-)
@bubu123321bubu
11 жыл бұрын
work great
@trainliker100
3 жыл бұрын
The cat also seemed to have a professorial look to it.
@johnnyllooddte3415
8 жыл бұрын
what are some of the brands for larger turbines
@mean78mashine
11 жыл бұрын
Pleas test test the turbiner. Starta förändra avsluta.
@pietzeekoe
12 жыл бұрын
I don't want to seem inpatient, but when will the FPV backpack video be up? Thanks
@zero00tolerance
12 жыл бұрын
It's the time of the rc jet age...lets lower the price and mass produce it soon we can all have a jet engine everywhere.
@Twin_Flyer
11 жыл бұрын
Whatever happened to part 2? i do not see a follow up listed...
@jirimar
12 жыл бұрын
cats just love new boxes
@xXGH0STEYEXx
12 жыл бұрын
It certainly is! Is there a possibility of putting the turbine on the cat? :D
@bill34207
11 жыл бұрын
With this video being published 6 months ago and no follow up, did the turbine turn back to vapor making it's way to the test stand?
@ChickenHawk110
12 жыл бұрын
"well they are doing it cuz they have only one purpose. sell sell and sell without even thinking about quality and purpose" I know right? Its NOTHING at all like: "Here, we are now releasing the new F550 Hexacopter and will be calling it Hexaider. This complete combo is now available to order directly from us..." - alishanmao. Or, nothing at all like: "This is the Spy hawk Mini Glider...We are going to sell this glider soon at our site. We are now taking preorders." - alishanmao.
@leifchurchill
12 жыл бұрын
i do live in canada but i dont know if that would have anything to do with it
Пікірлер: 295