Nice to see someone actually do some work instead of cookie cutting. I logged off 32 pulp cord of red pines with the 372 model just to see if it would hold up. Only complaint I had was it was a tad on the heavy side compared to a newer XP model but it held up pretty good I was surprised.
@randywoodward9707
Жыл бұрын
That's how I do it... bore cut and push with the skidder if it sets back on ya... nice to see someone not using a wedge on every tree. I just bought a couple of the neo tec pro (660's) mainly because I like the 660 better than 661 or 500i and I have lots of old parts saws
@timbarden4578
2 жыл бұрын
Those blue saws have got better.crappy bearings will crop up on the pto side eventually. Just replace them with good stuff.I have a buddy got million bf on his.only had a crankshaft bearing go..we got oem bearings in it now..nice job on the channel....
@hoskinslogging9858
2 жыл бұрын
Thanks buddy. I didn’t think the saw would hold up this long.
@muskyman26
2 жыл бұрын
That thing cuts nice! You sure you didn’t put China plastics on a real stihl. “Sleeper saw” love the channel!
@cammatney6388
Жыл бұрын
Nice job man well done your saw was a little dull but you held your own proud of you
@nepaoutdoors8536
Жыл бұрын
Do some cheap mods and tune it up real good and then you’ll have a serious saw.
@workinmatt7847
2 жыл бұрын
Do you not get eat up with ticks when your cutting.
@hoskinslogging9858
2 жыл бұрын
Yeah sometimes. Depends on the job.
@timberslasher4899
2 жыл бұрын
I have one of the 372 copies and it is a good saw for the money. If you put on a genuine Husky carb and spring bushings they are almost like the real thing.
@hoskinslogging9858
2 жыл бұрын
Yeah man. I’m kinda shocked that mine hasn’t blown up yet. Well worth the money if someone wanted a back up saw
@timberslasher4899
2 жыл бұрын
@@hoskinslogging9858 I am looking forward to that new 592xp Husky... Im a Husky fan but Stihl has been outdoing them for a couple years...
@hoskinslogging9858
2 жыл бұрын
I’ve never had my hands on a husky, I’d love to try one. But I’ll tell you what. We’ve had that 661c stihl for 4 or 5 years and have yet to take a screw out of it. These things hold up man
@michaelgardner3728
2 жыл бұрын
I've had the same saw for 2 years I don't cut timber but have cut alot of fire wood no problems yet once I learned how to start it. I choke mine 4 or 5 pulls put it on fast idle it starts. Mine will flood if crank it to much on choke an never seems to hit on choke after the 4 or 5 pulls put it on half choke it hits right off. It didn't do this the first year ?
@hoskinslogging9858
2 жыл бұрын
If your your saws ever flood, a carburetorated saw that is, take the choke off and put it in run. And hold the trigger in and drop start that thing till it hits. If you have the strength to hold it out from you that is. Works every time. But it takes me 4 or 5 pulls to start mine as well. Usually hits 3rd time on full choke. Then one or two more times on run to get it running usually
@michaelgardner3728
2 жыл бұрын
I know what you're saying I like the saw but I agree it's not a stihl
@hoskinslogging9858
2 жыл бұрын
If you had to buy a saw that you depended on day to day. I’d go with the stihl. They’re tried and true. I’m blown away with my 500i
@michaelgardner3728
2 жыл бұрын
@@hoskinslogging9858 I'd like to have a 500i but can't really justify it at 73 years old😀
@hoskinslogging9858
2 жыл бұрын
@@michaelgardner3728 that’s understandable haha
@jtrocktree5409
2 жыл бұрын
Damn it hoss , you put a lot of energy in that pecker pole , go get-er Dawg .
@philevans5586
2 жыл бұрын
How you like it compared to the 661
@hoskinslogging9858
2 жыл бұрын
661 is lighter and will out saw it. Take the stihl any day. But this saw isn’t terribly far behind the 661 and costs a fraction of the price
@hoskinslogging9858
2 жыл бұрын
It would be a great back up saw considering the price point
@seanbaskett5506
Жыл бұрын
So apparently China can make a clone of a German saw with the same power specs that actually performs? Wow. That's a first.
@hoskinslogging9858
9 ай бұрын
It’s an alright saw. Take a stilh any day
@wyattmalloy7828
2 жыл бұрын
How long of bar are y on u running on the g660
@hoskinslogging9858
2 жыл бұрын
24 inch
@wyattmalloy7828
2 жыл бұрын
That is what I thought it looked like... you should make more videos on the g660 more often. I am watching the videos cause I plan on buying one that is why i need more videos about it
@wyattmalloy7828
2 жыл бұрын
Thank you
@justinweaver8787
2 жыл бұрын
How long u been workn it so far?
@hoskinslogging9858
2 жыл бұрын
About 4 months.
@justinweaver8787
2 жыл бұрын
No issues so far?
@hoskinslogging9858
2 жыл бұрын
@@justinweaver8787 a few minor things. I have a short review of it in the next video coming up
@justinweaver8787
2 жыл бұрын
@@hoskinslogging9858 awesome look forward to it. Be safe buddy.
Пікірлер: 35