Great, according that I was finally able to create app, obtain api, add integration and functional panel. Thank you!
@BeardedTinker
2 жыл бұрын
Glad it helped Ondrej! Thanks for the post!!!
@ansomeBob
4 жыл бұрын
Another super tutorial from our BeardedTinker - Thanks from Wales
@BeardedTinker
4 жыл бұрын
Glad you enjoyed it Bob! Thank you very much!!!!!
@Rickr522
4 жыл бұрын
Thanks for another clear, concise video. And just in time, I was having the itch to move from Darksky sooner rather than later.
@BeardedTinker
4 жыл бұрын
Thank you @Rickr ! Me too and having AccuWeather available is great alternative.
@chris
2 жыл бұрын
When you first add it (see 4:10) it shows you the Latitude and Logitude. I'm assuming you can change it (I didn't try when I first added it). Now I'd like to change it, but can't for the life of me figure out where that setting is stored. Do you know? Thanks!
@BeardedTinker
2 жыл бұрын
I think that the only way is to remove it and re-add once again. Will have to test something, but I think it doesn't allow you to edit location after you add it.
@chris
2 жыл бұрын
@@BeardedTinker That’s what I’ve concluded as well. Sad that they don’t allow you to change it after adding!
@smccomas01
3 жыл бұрын
Thanks, because of this video I was able to integrate accuweather.
@BeardedTinker
3 жыл бұрын
Thank you Stephen for your comment! Glad you got it working!!!
@Runehorn
4 жыл бұрын
Pretty awesome, there is a lot to fiddle with here for sure, thanks for the tutorial!
@BeardedTinker
4 жыл бұрын
Glad you liked it @Runehorn !
@kcoop99
3 жыл бұрын
Great video! I was using a custom weather card with the horrible stock weather api. Accuweather is MUCH better!
@BeardedTinker
3 жыл бұрын
It is great integration!
@kcoop99
3 жыл бұрын
BeardedTinker how long does the certificate last? I did it last night and it's no longer working..
@BeardedTinker
3 жыл бұрын
API one? It should last a long time. At least a year. Thing that could happen is that you had too many requests in one day (for example you restarted HA few times) and now you have to wait for day reset.
@ИльяПопов-т4н
2 жыл бұрын
Do you know what means uv_index and without number of days if we have also 0d? - sensor.obraztsovo_uv_index (what is this for?) - sensor.obraztsovo_uv_index_0d (this I suppose today) - sensor.obraztsovo_uv_index_1d (this I suppose tomorrow)
@BeardedTinker
2 жыл бұрын
Hi Ilija! If I remember correctly - uv_index (without any number of days) should be current value. Those with 0d-4d are forecast for today and next 4 days. So you have sensors for both forecast and for current UV index.
@jaspreetdandiwal
10 ай бұрын
Hi there, when I use that api key in my home assistant. accuweather keep throwing message invalid api key. Iam from New Zealand, if you can advise on this.
@BeardedTinker
10 ай бұрын
You did copy exact API key from the developer.accuweather.com/ - did you check that there is no extra space at the beginning or the end. Not sure if that would throw the error, but it's very simple setup process, so can't see anything going on there except wrong copy/paste. When you copy from the site key, try it with following URL: dataservice.accuweather.com/currentconditions/v1/{locationKey} Just replace last part with your key
@carnagelan
Жыл бұрын
Hello There, I have done everything and the intergrtion is working but this intergration doesnt give me the correct weather forcast. Is there anything else to change
@BeardedTinker
Жыл бұрын
Nothing that I can think of. The only possible issue that pops on my mind is if it's pulling the wrong location data.
@bystrzakk
Жыл бұрын
Hello, do you know if is it possible to trigger other devoces by data from accuweather? For example if there is a windy day, send event to pull up all window shitters?
@BeardedTinker
Жыл бұрын
There should be sensor named sensor.accuweather_wind - and it should contain actual wind data. You can use that one as trigger to close shutters.
@PetrusB83
3 жыл бұрын
Excellent video, gave me exactly what I needed. One question though. How does accuweather know my location to give me the correct forecast? I do not see that it lists the location as an entity in Home Assistant.
@BeardedTinker
3 жыл бұрын
This is EXCELLENT question. Didn't even think about it before. My guess (but only my guess as I haven't checked code) is that it's either using your Home Assistant location (town) that you configured in HA or maybe coordinates if they were specified. If this is coordinates that this would be a privacy issue, so my guess is town from HA.
@PetrusB83
3 жыл бұрын
@@BeardedTinker thanks, that would make sense. I also guess it is using my "home" location, but I could not find anywhere to configure it.
@BeardedTinker
3 жыл бұрын
In Configuration - General settings, you can specify location. Although that is Time Zone + Coordinates on map.
@razvanon
Жыл бұрын
you haven't shown how to select location or area for which you want the weather data like temperature etc. Where is that setting? Mine shows different temperature....don't even know where is that from...doesn't show
@BeardedTinker
Жыл бұрын
That is done by the system automatically by using your location setting in Home Assistant - check the documentation.
@baijalashok
4 жыл бұрын
I have managed to get the API key from AccuWeather, but when I enter it in Integrations, I repeatedly get a message Unable to Connect. What could be the reason
@BeardedTinker
4 жыл бұрын
Hmm - this is a strange one. Do you maybe use PiHole or AdGuard ? Did you try a bit later - maybe the server was down, although I doubt it.
@baijalashok
4 жыл бұрын
@@BeardedTinker Thanks for the response. I have recently upgraded Home Assistant to the latest version. Strangely, after upgrade Dark Sky also stopped working and AccuWeather fails to integrate. I just checked notifications and saw a message which reads "Invalid Config The following integrations and platforms could not be setup -- introduction. Please check your config." Could there be some line missing in the config. If so, can you suggest a solution. Sorry for the trouble.
@BeardedTinker
4 жыл бұрын
@@baijalashok check your configuration if you have somewhere "introduction:" inside. This integration has been removed.
@tit0um
Жыл бұрын
do you know which port is required? i am running it inside a docker and i cant reach the website 😕
@BeardedTinker
Жыл бұрын
It's web service - so standard HTTPS port is needed. But Docker ports have no impact on it as this is outgoing traffic not incoming (in terms who initiate it). Check that firewall is not blocking it.
@tit0um
Жыл бұрын
@@BeardedTinker thanks for the fast answer ! i have more a feeling that i have a dns resolving issue which prevent the container to go to the right website. Docker is really great but a bit of a headache when network start to be heavily required.
@BeardedTinker
Жыл бұрын
@@tit0um did you set Docker to use host network for home assistant?
@mclarkin0906
2 жыл бұрын
Is there a way to use this integration for hourly forecasts?
@BeardedTinker
2 жыл бұрын
For AccuWeather, don't think so. It can give you a lot of data hourly, but not forecast as Dark Sky had.
@KingKongMedia_CT
22 күн бұрын
How do you integrate this into a wordpress website?
@BeardedTinker
20 күн бұрын
Never tried to be honest, but here is a link to community portal with discussion on it: community.home-assistant.io/t/publish-sensor-value-to-wordpress/49646
@markstanchin1692
2 жыл бұрын
I tried this and I got to the part where I insert the API key into HA but it says Invalid API Key.
@BeardedTinker
2 жыл бұрын
No idea as to why this shouldn't work. API key is limited in terms of API calls, but if it's new one, it should be OK. Looked at community form and haven't found any similar issues.
@markstanchin1692
2 жыл бұрын
@@BeardedTinker What’s also strange is the API is invalid when I try ambient weather integration as well. My installation is on a NAS virtual machine and I’m running all the latest versions.
@BeardedTinker
2 жыл бұрын
@@markstanchin1692 I guess that you did restart HA just in case? No idea why 2 API tokens could be wrong/not working.
@markstanchin1692
2 жыл бұрын
@@BeardedTinker OK that’s what I did I got the Ambient Weather to work but still no AccuWeather. It still says invalid API key. I wonder if there’s a way to just put it in the yaml configuration instead of the UI?
@BeardedTinker
2 жыл бұрын
@@markstanchin1692 not anymore. You can try and create new API token for start.
@arnoldbencz6886
3 жыл бұрын
Super video Sir!
@BeardedTinker
3 жыл бұрын
Thank you Arnold!!! Much appreciated 😊
@arnoldbencz6886
3 жыл бұрын
@@BeardedTinker I used acu weather long time ..with cca.15 entities..Now I use it with more 100 entities :-) Thanks.
@BeardedTinker
3 жыл бұрын
@@arnoldbencz6886 you can never have too many entities :D
@emphantom9122
Жыл бұрын
у вас есть 3д принтер в homeassistant ?
@BeardedTinker
Жыл бұрын
Da. Previously I had Ender 3 Pro with Marlin via octoprint now I have Voron with Klipper.
@thomasbpetersen
3 жыл бұрын
Will it be possible to get the condition weather id number and not just the condition text/status?
@BeardedTinker
3 жыл бұрын
Excellent question. From what I've seen, no unfortunately. Condition is provided as text. You could to transformation based on condition to create id for it.
@TheVictoire22
3 жыл бұрын
@@BeardedTinker do you know where to find all different conditions to make an automation? I need all the for controlling my awnings.
@TheVictoire22
3 жыл бұрын
found them ;-) developer.accuweather.com/weather-icons
@BeardedTinker
3 жыл бұрын
@@TheVictoire22 not sure really. I know I've seen list somewhere but it was long long time ago (few years back). You can try with list that is available here as weather icon states: www.home-assistant.io/lovelace/weather-forecast/ It lists around 20 possible states at the bottom of the page.
@carltonwbrooks
4 жыл бұрын
Again great video. I have many DarkSky integrations, notifications and automation's based off darksky. Could you do a video how to switch entities from one to another. I have many that are fairly complicated. Would love to know what is the equivalent of lets say dark_sky_overnight_low_temperature_1d in the accuweather format. Here is a sample ################################################### forecast_1: friendly_name_template: > {%- set date = as_timestamp(now()) + (1 * 86400 ) -%} {{ date | timestamp_custom("Tomorrow (%m/%d)") | replace("(0", "(") | replace("/0", "/") }} entity_id: sensor.forecast_1 value_template: > {{states.sensor.dark_sky_daytime_high_temperature_1d.state|round(0)}}°/{{states.sensor.dark_sky_overnight_low_temperature_1d.state|round(0)}}°/{{states.sensor.dark_sky_precip_probability_1d.state|round(0)}}% ###################################################
@BeardedTinker
4 жыл бұрын
Hi Carlton and thank you very very much for your comment. Sorry for a delay in replay because I was thinking a bit about this one and trying to get this converted. So, to start, I stopped pulling extra data from DarkSky and I don't have .sensor.dark_sky_daytime_high_temperature_1d - justt 1h version of it. In theory, with AccuWeather, value_template should be something like this: value_template: > {{states.sensor.beardedhassio_realfeel_temperature_max_1d.state|round(0)}}°/{{states.sensor.beardedhassio_realfeel_temperature_min_1d.state|round(0)}}°/{{states.sensor.beardedhassio_thunderstorm_probability_day_1d.state|round(0)}}% BUT - difference si that AccuWeather provides Thunderstorm % for both day and night, while DarkSky gives you precip_probability. I do apologize if I got something wrong - hopefully this is what you were looking for...
@iamsavvy
2 жыл бұрын
Heard some shady stuff about these guys
@BeardedTinker
2 жыл бұрын
Most of them have some corporate greed embedded. But at least, here we are getting data from them and not the other way around :)
@iamsavvy
2 жыл бұрын
@@BeardedTinker Agreed...for now...hopefully user data won't get mined & resold to some other company for some other nefarious reason in the future
@BeardedTinker
2 жыл бұрын
At least here, with integration, they don't get any of our data (except IP address).
@nedcjp
3 жыл бұрын
C'est n'importe quoi!
@BeardedTinker
3 жыл бұрын
Sorry to hear that...
@OGKenG
2 жыл бұрын
This information is old.
@BeardedTinker
2 жыл бұрын
And yet, you can still use most of it to get API key and activate AccuWeather via UI 😉
@DJ-0SSI-G
3 ай бұрын
The Integration/ options are unaivalable to me. Does smb know how to enable it? Thanks
Пікірлер: 71