Let's check out the current state of Home Assistant to KNX integration via Matter with 1Home Server. Also: Grey Friday is here! Get Server 30% OFF: www.1home.io/p...
Wow this makes adding kns devices to home assistant much easier! Well done!
@74jerker
10 ай бұрын
Whats the benefit of going via matter than directly to the knx?
@emil.brunner
10 ай бұрын
Counter question! How do you go directly to KNX from HomeKit, GoogleHome and Alexa?
@74jerker
10 ай бұрын
If that question was intended for me, I'm sorry I'll have to pass it on. I don't run any of the systems you mentioned, only HA. I actually signed up for one of these modules (for the first early bird price). Since they listed HA compability as a feature I believed it could be used as a direct IP-KNX interface.
@chrisger555
9 ай бұрын
@@74jerkerI think that would be an right assumption, that you can use it as an direct IP/KNX interface. The benefit of matter would be that the KNX installation would be kind of self documenting via the 1Home Server. I am not absolutely sure about this next thing, waiting for my device. But I think you set up the matter profile for example a thermostat in the 1Home Server, and then can re-use this both in Apple Homekit / Home Assistant / Google Home / Alexa. This way, one does not have to re enter all the KNX group addresses in every system. == This will make KNX in a home much more available for the end consumer. An electrical installer using 1Home Server will have some great benefits here.
@GregorKrmelj1h
9 ай бұрын
@@chrisger555 thats correct! More details here: www.1home.io/docs/en/server/matter-bridge/apps/home-assistant#why-home-assistant-via-1home-server-and-matter
@fuseix4386
9 ай бұрын
I have mix Smart Home products at home from Matter,zigbee,Loxone and KNX With a single 1 home server can I bring this all together ? And also control it all with voice controls
@GregorKrmelj1h
9 ай бұрын
I'll try to break it down. 1. Matter - I assume this means Matter accessories like Eve smart plugs, Nanoleaf smart bulbs, etc. With the “integrate Matter accesories” feature coming in Q1 2024 you will be able to get these devices into the 1Home Server. 2. Zigbee - You will need to use a 3rd party Zigbee-Matter bridge. Afterwards you will be able to add the Zigbee-Matter bridged devices into the 1Home Server with the “integrate Matter accesories” feature coming in Q1 2024 - just like with point no. 1. 3. Loxone - We have the 1Home Server for Loxone which bridges devices into Matter. 1Home Server for Loxone is launching in Q1 2024. 4. KNX - We have the 1Home Server for KNX, which bridges devices into Matter as well. Once your devices are in the 1Home Server, either coming from Matter (points 1 and 2), from Loxone (point 3) or from KNX (point 4); you will be able to use them cohesively in the 1Home Server automations feature.
@vanpeers
10 ай бұрын
Are the home assistant devices also visible in the 1home configurator? (so two way device communication) Because that would be very useful. So you can add a zigbee device in Home Assistant and create scenes, automations in the 1home config.
@gregorkrmelj3541
10 ай бұрын
Currently its only one way - so 1Home devices (i.e. KNX bridged devices) into Home Assistant. You could however get a Zigbee-Matter bridge and then with the 1Home Server “integrate Matter accesories” feature coming in Q1 2024 get them inside 1Home to configure automations.
@chrisger555
9 ай бұрын
You would maybe just do this by creating the address you would like to write to, expose with matter, and write to from HA?
@GregorKrmelj1h
9 ай бұрын
@@chrisger555 If I understand correctly, you are suggesting that you create a "virtual" KNX group address, integrate it in 1Home Server as a "virtual" device (e.g. On/Off plug) and then in HA create an automation to change it's state depending on another HA integrated device. While this is technically possible the workflow is not the best.
@chrisger555
9 ай бұрын
@@GregorKrmelj1h I was not thinking optimal workflow, but can it be done. ✌
Пікірлер: 15