VERY VERY GOOD, THIS IS THE BEST... This was the only one that could make it work here. thank you my friend. Success in your projects.
@360viewplus
4 ай бұрын
Thanks you so much for your valuable reply......
@raghavendradarji4863
9 ай бұрын
Good iam understand it's ok
@360viewplus
9 ай бұрын
Thank you for your support
@abdullahalhasan3880
5 ай бұрын
Sir, I am unable to upload the code. It erors showing "please spacify your BLYNK TEPLATE ID and AND BLYNK TEMPLATE NAME". Please help me to get out of this problem.
@360viewplus
5 ай бұрын
Template ID and Name will be generated automatically when you enter into Blynk ID
@Crumblestories
Жыл бұрын
Super sir
@pselvaraj4911
Жыл бұрын
useful Project
@NexusPixel7
Жыл бұрын
Super sir
@NexusPixel7
Жыл бұрын
Super sir
@suvamkumarnayak
Жыл бұрын
Thanks for your effort.successfuly completed this project.keep going.
@360viewplus
Жыл бұрын
Thank you so much for your positive reply and support.Subscribe my channel for more videos dude.
@cartoontelugu6890
Жыл бұрын
hy bro my code working good but device showing offline in web and mobile
@360viewplus
Жыл бұрын
Dude Make sure your network connection is well
@cartoontelugu6890
Жыл бұрын
@@360viewplus bro wifi passward and user name correct but it showing offline only please help me bro
@360viewplus
Жыл бұрын
Have you put your authentication token correctly?
@cartoontelugu6890
Жыл бұрын
I changed the esp Now it is connecting and showing online but lights are not working
@360viewplus
Жыл бұрын
@@cartoontelugu6890 Are you connected 220v BULB with relay?
@hakiimnaparialhassan5062
Жыл бұрын
Supper sir! but my web dashboard is showing offline but i didn't connect any relay to the nodemcu. without that will it show online offline
@topmost2481
Жыл бұрын
I not have lap now so I will try in my android its work or not
@360viewplus
Жыл бұрын
To make Blynk dashboard you need system
@carloscanet-1d
10 ай бұрын
I can not find you simple 4 chanel in the library.If I may!
@youtubegame741
Жыл бұрын
Nice
@legacygsm34
Ай бұрын
Everything is well properly connected but relay is not showing red light but I did not use breadboard
@360viewplus
Ай бұрын
Give separate power to relay and check.
@legacygsm34
Ай бұрын
@@360viewplusRelay one has started corresponding but the remaining three relay are not working what could be the problem
@360viewplus
Ай бұрын
@legacygsm34 disconnect and connect with proper VCC and GNS.it will respond.
Kindly follow the steps shown in the video.Definitely it will work dude..
@MangeshGovalkar
Жыл бұрын
Hey man, I can't thank you enough for this video. You are my life saviour I chose this as my last year project but I had issues with the code, your code works perfectly fine which helped me a lot. Out of all the videos on yt this was the best! Thank you once again @360 View Plus. Kuddos to your work!🤝🏻
@360viewplus
Жыл бұрын
Thank you so much for you positive comments.Keep subscribe and watch my channel.It will beneficial for you.Thank you ..
@legacygsm34
Ай бұрын
Please can I add manual switches to this project?
@360viewplus
Ай бұрын
Ya
@360viewplus
Ай бұрын
Yes you can add
@legacygsm34
Ай бұрын
Pls can you help me explain how to add manual switches to this project because it’s only your video that works for me
@sibisk2599
8 ай бұрын
Can you send the Arduino program code .
@360viewplus
8 ай бұрын
Kindly check in the description
@sibisk2599
8 ай бұрын
@@360viewplus in guithub I can't find the exact program can you send exact link of the program
@adamrahmawan567
Жыл бұрын
Sir, why doesn't the output of my relay work, what's the problem? Plisss answer sir
@360viewplus
Жыл бұрын
Check required amount of power given to relay
@aimanfirdaus2581
Жыл бұрын
hi admin, can you do a program with esp32 please :(
@360viewplus
Жыл бұрын
Sure.omce done I will update....
@0124akash
Жыл бұрын
Relay module se ESP32 wiring connection ko kon sa protocol bolenge sir ?
@360viewplus
Жыл бұрын
I have given in detail about how to connect relay.rewind the video and go through it slowly.you will get a clear
@0124akash
Жыл бұрын
@@360viewplus connection kahan aur kaise karna hai ye to clear hai. Ye connection ko bolenge kya ? I2C, UART, SPI, RJ45, RS232 inme se kon sa protocol ka use kiya hai sir ?
@Saravanan-g2w
11 ай бұрын
Awesome project
@angadsingh2609
Жыл бұрын
sir is there need of giving the template nama..?
@360viewplus
Жыл бұрын
No need dude
@fmtech1867
Жыл бұрын
What do you use to give power to nodeMCU? Usb with laptop or adopter
@360viewplus
Жыл бұрын
Power bank
@360viewplus
Жыл бұрын
I have used power bank to power up
@hakiimnaparialhassan5062
Жыл бұрын
sir please my device is offline help me out
@360viewplus
Жыл бұрын
Kindly put correct token number and also put your SSID and password. ensure you have good internet connection
@hakiimnaparialhassan5062
Жыл бұрын
@@360viewplus OK SIR every thing is intact
@mehradeel
11 ай бұрын
Kya hum bulbs ke jga electricity sockets lga skte jis me bade me koi bhe chez chla se...
@360viewplus
11 ай бұрын
Kindly tell me in English bro.I will explain...
@mehradeel
11 ай бұрын
@@360viewplus Can we use electrical sockets instead of light bulbs so we can run anything. I want to used it to run 5 water pumps of 12v
@360viewplus
11 ай бұрын
Sure bro.You can use electrical socket.You can run any electrical appliances.
Пікірлер: 73