What a great idea. I like how you explained both. Good for you.
@brentsmith5647
Жыл бұрын
Brilliant video thank u 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
@vrm86gt
Жыл бұрын
good job!
@maxlacugnato442
Жыл бұрын
Thank you but that's been along time ago and I do them on a lathe now...lol
@screemer122
7 жыл бұрын
super job ..i liked the video to
@johnholloway2445
6 жыл бұрын
max your,e like me dont need a snapon 3000 dollar polisher.ill make oneout of scrap as long as it works i dont care . well done sir
@blairguinea6811
5 жыл бұрын
good job Max
@dirtydug7526
9 жыл бұрын
Good stuff man
@johnwoodworth248
7 жыл бұрын
With 320 grit you should never slid the belt across the journal you should do plunge style to avoid making the Journal a hourglass laying on its side shape . Plus the current draft should be turning the opposite direction the same direction it will be running in the engine . But good set up just the same
@deankay4434
4 жыл бұрын
Regardless of what direction, grit action and other comments, you have way more than 99% of DIYers. As a thought, if you have a lathe would it make sense to make cones to hold the ends? Large trucks even school busses that use a straight axle have "King-Pins" and bushings that wear out. The bottom uses a large thrust bearing and are changed as a kit, then thrown away. If you have a shop for large trucks, check in and see if they have a few you can get. I have 4 with 3 different hole size. Large and larger. Just joking but they work great on load using pushing tools or pullers. Just use a needle on your grease gun and you'l find lots of use for these little gems few know about. Retired NIASE Master Tech since 78. Hit the like for anyone who fabricates their own stuff!
@maxlacugnato442
4 жыл бұрын
Thanks Dean...yeah that was along time ago. Surprised that I left the video up I honestly forgot about it..lol. I didnt have a lathe at the time which is why i did this. Worked at the auto machine shop for several years and did cranks etc on the lathe there woth the Goodson crank polisher. I fabbed a unit that was identical to the Goodson for zero money just matetials laying around and time. Uses the standard belt. The jig Was a quick build and not the greatest but it got the job done. This setup is long gone now and I have a lathe that will do the job correctly. I guess for me yes there is a correct way but also a way to make do with what you can afford and get the job done too. Thanks for watching the video!!
@zerkfn8501
7 жыл бұрын
good job...cudos bro
@100nortonfan
9 жыл бұрын
Very clever! Unfortunate camera settings, insufficient details, like how is belt tension adjusted or how is belt tracking accomplished, Otherwise, thanks for sharing.
@goyocarreras
3 жыл бұрын
Good video, you could tell me what type of sandpaper you use, and how thick sandpaper is needed to polish the crankshaft, thanks.
@maxlacugnato442
3 жыл бұрын
It is the standard crank polisher belts made for crank polisher. Can be purchased from goodson or any other auto machine supply
@goyocarreras
3 жыл бұрын
@@maxlacugnato442 I'm from Spain, that's why I ask him because I don't know what type of sandpaper they are, that's why I asked him the grain to reduce a few hundredths and then polish.
@1964deuce
7 жыл бұрын
Your spinning it in the wrong direction
@ImpalaLfx
3 жыл бұрын
Please explain b4 I make the mistake
@nicoledearman8237
7 жыл бұрын
40 rpm would be better
@dpierson489
9 ай бұрын
As soon as you turned on your machine, I noticed that the crankshaft is turning in the wrong direction!! No matter how smooth the surface is, it will eat the bearings.
@Shade_tree_garage01
3 ай бұрын
let me guess, you're an internet mechanic with 70 years+ of internet mechanic experience?
@dpierson489
3 ай бұрын
@@Shade_tree_garage01 who are you? NOTHING!!! you are in dire need of retraining ( if your willing to learn ) but to me it seems like you already think you know it all ,
Пікірлер: 24