Wonderful step by step thank you! That 45 degree cut in the corner made it so much easier to avoid creasing my film!
@marlaward1552
19 күн бұрын
I would have loved it you showed what the film looks like on the outside in the day and in the night
@rachael-777
16 күн бұрын
I was hoping the same 😊
@judoslap59
11 ай бұрын
You da man, thanks so much for your videos, I've done 8 windows now and getting better each one. Without your videos I would've placed it in the too hard basket. I really appreciate it man thanks so much all the way from Australia
@rcwindowfilms
11 ай бұрын
Your very welcome and thanks for your support and time.
@SusanBelter
2 ай бұрын
Thank u so much I bought this and had NO clue what I was doing. Your video helped so much. Mine is not perfect, but I did it, and it works!
@rcwindowfilms
7 ай бұрын
Let us know if you want more details if you want more tips or tricks not seen or if you need any in-depth information. 😀
@hieeih6468
6 ай бұрын
If you use a card and a blade to cut on the inside of the window seal/gasket, then technically there would be a small gap (width of the card) between the film and the seal/gasket
@JillannB
5 ай бұрын
HELP EVERYTIME I CUT IT LOOKS LIKE CRAP AT THE CUTS
@frfr7026
8 ай бұрын
Lots of valuable pro tips. Really appreciate the walk through.
@Cod_call_of_duty_R_Y_A_N_
5 ай бұрын
You are a very good teacher thank you for this video
@billroberts2808
3 ай бұрын
Great video - thanks! i'm going to give it a try this week. Need some treatment on my east facing windows.
@rcwindowfilms
3 ай бұрын
Hey there! Thanks for the questions. In my opinion, the best percentage of window film is either 15% VLT or 30% VLT if you want to maintain standard visibility. I recommend using dual reflective window films because they provide privacy and significant heat reduction without creating a reflection on the interior side of the home, allowing for good nighttime visibility. You can find our films online. In my personal opinion, dual reflective window films offer the best value for your money.
@annk4219
7 ай бұрын
made an impossible task easy...Thank you
@judoslap59
11 ай бұрын
Man you make it look easy. When i try the reverse roll and i let it drop it only unrolls a little bit it doesn't unroll all the way can you tell me what im doing wrong is it the kind of adhesive on the film im using? The tint sticks to any surface it touches so it would stick to the timber window frame in this video I assume it's different to the preasure sensitive adhesive tint you are using in this video
@MylaCruz11
20 күн бұрын
Perfectly done I want this for my living room!🎉
@MathiasJarlson
5 ай бұрын
great instructions
@guynotes777
Жыл бұрын
Not sure I saw correctly, but from other videos, you adhered the opposite side that others have done. All other videos I have watched, the installer has placed the side where the film protection was removed, while you did the opposite..at least that is what I did see on first viewing..
@rcwindowfilms
Жыл бұрын
we back roll the film and by doing so it removes the liner placing it on the back side of the film. On video it's hard to catch unless explained. Good catch but all films have a sticky adhesive that is activated by uv light. This includes exterior window film.
@jackfromthe60s
7 ай бұрын
@@rcwindowfilmsAh, so backrolling essentially flips the liner to the other side of the film thereby exposing the adhesive side of the film? Have I got that right?
@rcwindowfilms
7 ай бұрын
@@jackfromthe60s yes 🙌 that’s correct
@wubieful
5 ай бұрын
Thank you I was so confused! By back rolling, the liner is unrolled from the adhesive side of the film and rerolled onto the other side of the film?
@jimmay1988
4 ай бұрын
@@wubiefulyeah, quick abracadabra trick when he dropped the roll out.
@buya_pr
2 күн бұрын
Which tint do you recommend?
@mattv18930
19 күн бұрын
This just convinced me to tint my windows
@briebrownn
21 күн бұрын
Has anyone gotten these with house plants? I'm worried the UV light will be completely blocked and kill them all
@moep737
20 күн бұрын
Maybe keep the plants to one or two windows that really wouldn't need this privacy tint
@ndumiso1987
4 ай бұрын
Bro, what is the film for, isn't the film suppose to stay there until you're done to prevent scratching as you work?
@khalildahbour3351
Жыл бұрын
Hi there From where to buy the role ? And is it available in canada
@Switchrunner23
7 ай бұрын
Looking to keep our view of outside and let sun light in, but create privacy. What kind of film would you recommend and where would we get it? Thanks
@rcwindowfilms
7 ай бұрын
In my personal opinion, I would say a dual reflective window film. It may sound counterintuitive, but dual reflective simply means the interior is less reflective than the exterior side of the film. This film will not allow others to see in during the daytime hours, but will allow you to see out. Additionally, this film provides great UV protection and heat reduction as well as allows natural light to come in the preferred visible light transmission would be 30%. What this means is 30% of the light will still be allowed to come in which is pretty significant after the film is fully installed
@mikesayer8924
Жыл бұрын
Love your videos helped me start my own buisness! You sound like coyote Peterson lol
@rcwindowfilms
Жыл бұрын
Thank you!!! Also congrats
@faizalk9005
3 ай бұрын
From where can I buy the film? Not sure if it’s listed in RC’s website.
@rcwindowfilms
3 ай бұрын
We’re currently working on the shopping side of our website should be available in the next 2 to 3 weeks
@theredscourge
2 ай бұрын
If you pulled the backing off that way with automotive tint, you'd have the sticky side out, so I guess household tint must have the backing on the opposite side of the adhesive side compared to automotive tint!
@ACE-kn4vc
Ай бұрын
I was thinking the same thing.
@ManicObsessiveMe
28 күн бұрын
I think the way he unraveled the tint, the liner transfered to the other side
@kylebakin
9 күн бұрын
@@ManicObsessiveMe correct... I was wondering the same, but had to watch the part again where he peeled off the top 6" then rolled it back
@hectorhernandez1362
5 күн бұрын
He reversed rolled it
@RoTeNdO
19 күн бұрын
How you do have everything needed in the description EXCEPT for the film?!
@Jon-id7ki
18 күн бұрын
Srsly. I'm confused
@greenmapper2
18 күн бұрын
I wondered the same thing. What film is best?
@buya_pr
2 күн бұрын
I thought I was crazy, I was wondering the same thing. 🤦🏼♂️
@joeowens8923
8 күн бұрын
Can I put window tint on out side for a window on porch it's dual Payne
@reganhuff98
5 ай бұрын
What brand of tint was used in the video?
@sdw3355
4 ай бұрын
Thanks for the video. It helped a lot but still have questions. I have looked at your links and the comments. You show us how to do this but I don't see a link for the actual window film. You've linked tools but the film has been difficult to find. I went to your website and it is for someone to come do it for me. Well, I live in a duplex. I have looked at Amazon and the results keep showing me one way film, which I don't want. Also, I am having trouble finding one with good reviews. I live in Texas and have about 5 windows that get bright sun. I want to be able to see both ways and just block the glare and some heat. Could you please tell me if I'm overlooking something? Thank you.
@genegalpin556
Ай бұрын
Great video buddy! Thanks.
@rcwindowfilms
Ай бұрын
You bet
@RosmahRashid-j1p
7 ай бұрын
Hello, thank you so much for your tips. Q: Can i just install the new tint over the old window frosted glass sticker? The frosted glass sticker is so difficult to remove because it comes in many shapes on the window glass.
@rcwindowfilms
7 ай бұрын
better to remove it with a scrapper blade but yes it is possible.
@wyatthemingway3012
19 күн бұрын
Was anyone else just bored and decided to watch this
@fabescolmsinc1200
19 күн бұрын
Literally here bc I’m bored. Zero intention of tinting my storm door.. well.. until now 😂
@jenniferk3
5 күн бұрын
It's the squeegeeING that brought me here. Bored AF 😅
@khalildahbour3351
Жыл бұрын
Can u do half the window if the size is large and then do the other half ??
@rcwindowfilms
Жыл бұрын
Of course that works
@robstar18
Жыл бұрын
What do you do if the gasket around the panel is about 5mm? Do you ever trim the gasket back?
@rcwindowfilms
Жыл бұрын
It really depends. We sometimes trim seals if the customer approves or remove them and reinstall them after film application.
@ukiboy77
5 ай бұрын
Any recommendations for Anderson windows? I think they're dual panel. I don't want glass shattering
@johndonoghue4295
4 ай бұрын
I am just starting out. Can you send Amazon links for all of the tools that you used?
@howardhustleporker9010
4 ай бұрын
Click more... on the description. They're all listed
@msmeganmole
2 ай бұрын
Clear strip protects the adhesive when in the box. Must come off to install.
@gav6808
Жыл бұрын
Good stuff keep it up
@rcwindowfilms
Жыл бұрын
Appreciate it
@arullsticker
Жыл бұрын
THANKYOU ❤❤
@ελευθερία-ε2ο
Жыл бұрын
What is the name/ color of the material you are using,
@rcwindowfilms
Жыл бұрын
This material is a dual reflective material that has a a slight bronze tone to it. the interior of the film is a dye base that has a neutral gray tone that helps counteract the bronze exterior providing a natural look from the interior looking out while reducing total solar energy by nearly 80%.
@dudleyd8498
Жыл бұрын
Can I use a window film on double pane glass? If the window film says the absorption is 43% is that ok for double pane glass filled with the gas?
@rcwindowfilms
Жыл бұрын
Yes, you most certainly can install window film on dual pane windows however, it’s important to identify where the Low e coating is present. A lot of times low e coatings are on the interior portion of the window. If it’s on surface three it’s best to avoid applying an interior film and go with an exterior film. Lois surface threes on the interior portion of the window so the side that you can touch from the inside of the house on/in between the glass if there’s a coat there, install an exterior film
@karenconner6237
6 ай бұрын
I just had a professional company install tine on my windows in my house. They left light gaps in all my windows. Then they came back and caulked the windows. Honestly, it doesn't look good. They did a crappy job on the caulking. I have never had anything tinted but I was surprised that with a straight edge there was light gaps. Is this normal or just a crappy install?
@rcwindowfilms
6 ай бұрын
I certainly think that the darker, the film, the more like gap you’re able to see, especially if you have white frame windows with a very dark film. Or whatever contrast the most. caulking is definitely something that’s not easy to get straight and look perfect but it can certainly help mitigate the amount of light gap. What a perfect job is is one that you’re most satisfied with. It sounds like you’re unsatisfied. I would highly recommend you reach out to the company and see what solutions they’re able to offer.
@eduardoaldaba
5 ай бұрын
Can i use car tint for my home windows ?
@matrixrory
4 ай бұрын
Is there a place where i can see the differences of different window films? When i go to purchase them only theres different colours. Black/Silver, Blue/Sliver, Brown/Silver, or just Silver. I'm not looking for light reduction as much. Im ok with a little light reduction but mainly looking for heat reduction.
@sinaazadi5615
Жыл бұрын
Would baby shampoo work the same as dish soap?
@rcwindowfilms
Жыл бұрын
Absolutely baby shampoo works just as fine however, we prefer Dawn dish soap primarily because it has some detergent and allows it to cure faster
@alec1113
5 ай бұрын
I have watched your vid a dozen times , and it still looks like the adhesive side is not against the window . What am I missing ?
@sinaazadi5615
5 ай бұрын
@@alec1113 look up reversed roll drop method.
@ECMercantile
20 күн бұрын
But who is the installer?😻
@yannmrt
Жыл бұрын
After installing my film, I have a kind of "milky" color between the glass and the film. Why do I get this ? I clean VERY well my glasses and even scrape it before installing the film
@rcwindowfilms
Жыл бұрын
The most likely cause of the issue is using excessive soap during the window tinting process. If you overlap the squeegee and there's too much soap, it can mix with the adhesive, resulting in a cloudy or milky appearance.
@randomhobbyist99
Жыл бұрын
Just a question on that what % is that tint?
@rcwindowfilms
Жыл бұрын
are you asking? What’s the best percentage of film or what percentage of film is this?
@randomhobbyist99
Жыл бұрын
@@rcwindowfilms I’m asking what is the percentage for that film you just installed.
@rcwindowfilms
Жыл бұрын
15% dual reflective window film this type is a pressure sensitive adhesive
@johndonoghue4295
3 ай бұрын
@@rcwindowfilms in your opinion what is the best percentage of film to use for residential? Also, do you use dual reflective? And do you have a link for film? I am basically looking for 36” x 100’ roll. Where should I buy it?
@MyFdfg
Жыл бұрын
Thank you!!!! Anyway it's not so clear how you reverse roll :)
@MyFdfg
Жыл бұрын
Also could you specify were can I find all those tools, squeegee, please?
@rcwindowfilms
Жыл бұрын
I suggest rewatching the section at 7:15 min into the video.
@Rainbow_Skyy
3 күн бұрын
Thank you, Lord Jesus! May the Lord bless you all.
@sterlgirlceline
Жыл бұрын
⭐️⭐️⭐️⭐️⭐️⭐️
@rcwindowfilms
Жыл бұрын
Thank you!
@RomboutVersluijs
Жыл бұрын
Isn't it normally the side where you pull off the last mee, the sticky side?
@RomboutVersluijs
Жыл бұрын
Guess that the co off back rolling Ng the film could have been explained more clear.
@rcwindowfilms
Жыл бұрын
sorry i thought it was pretty clear.
@RomboutVersluijs
Жыл бұрын
@@rcwindowfilms perhaps it was me than. For me it was not very clear that when you dropped the role after you peeled, it would back roll it basically. Seems like an advanced "move"
@rcwindowfilms
Жыл бұрын
Definitely, it's a bit of an advanced technique. But trust me, with a bit of practice and by adding some water underneath the liner, it'll adhere perfectly due to the vacuum effect when applied to the back of the film. This method is especially effective on larger windows.
@RomboutVersluijs
Жыл бұрын
@@rcwindowfilms yeah guess, handling ng slots ch a big g piece of tint and taking the liner off and such. This is way faster!
@chillchilli2671
Жыл бұрын
Eh, the film kept creasing, i give up 😅
@rcwindowfilms
Жыл бұрын
giving up is never an option. Keep at it you'll get it.
Пікірлер: 105