Nice work on this! I like it! Do you have video(s) of the full build?
@garys5490
11 жыл бұрын
Excellent job...Do you have more build info/pics. What kind of diff?
@ostlandr
9 жыл бұрын
I guess if I want a compact tractor, complete with PTO and Cat 1 hitch, on tracks, I have to build it myself. :-(
@thomasnoteboom1531
8 жыл бұрын
I like your little tracked vehicle if you do more testing add 90lbs to bed area(average weight of researching equipment) that should balance vehicle nicely.
@КонстантинЗапруднов-з3х
2 жыл бұрын
Бодрый драндулет но не плавает мы делаем плавающие
@craigbastian725
10 жыл бұрын
So did you use the Gulf motor and transaxle turned sideways? Automatic? Great job, this is the best performing homebuilt tracked vehicle I've seen yet
@MrYboss
10 жыл бұрын
yes it`s a golf diesel engine with automatic transmission in this video but the current version have a mercedes turbo diesel engine in it :) so stay tuned
@FRankybzoy
9 жыл бұрын
MrYboss Is transaxle turned sideways?
@GarnettM
11 жыл бұрын
Works good , Nice project .
@sethwatson8952
10 жыл бұрын
Fantastic machine. Top speed looks good. Steering, tracks, good. Diesel, good. I would like to see it outfitted with a power angle plow. As such, It'd be the perfect vehicle for plowing my driveway, and grooming snowmobile trails. I'd be interested to know where the tracks came from, how much it weighs, and what the build cost was.
@MrYboss
10 жыл бұрын
It will be more videos from this little red machine..will try to shoot it with the plow on too :)...the tracks are from a Hägglunds BV202
@jessejones2715
7 жыл бұрын
Is this just an open differential?
@MrYboss
7 жыл бұрын
Jesse Jones yes it is an open diff
@Андрей.Мойвидеодневник
Жыл бұрын
хорошая подвеска!
@muhammadershad1155
9 жыл бұрын
awesome,, its a great design, !
@budnixon
10 жыл бұрын
What are the tracks been used? From some sort of a tracked loader? Diesel engine? Manual or Auto transmission? Thanks for sharing the video... looks awesome...
@MrYboss
10 жыл бұрын
The tracks are from a hägglunds BV202 and the transmission is automatic...happy that you like it..it will be more videos of this machine, the current version have a mercedes engine and transmission so stay tuned :)
@martinda7446
10 жыл бұрын
That is ready for production fan..f%%%ng,,tastic!!! Just sort out cab styling...I would want at Gerry Anderson Thunderbirds (various) or UFO style front end...(don't want much, do I)
@emdman1959
10 жыл бұрын
Now that is my idea of snowmobiling
@jacuzzibusguy
5 жыл бұрын
Lovely! I am pleasantly surprised at how well the steering works. The big problem with using an axle with differential for the steering mechanism is that when you apply full brakes to one side, the opposite wheel spins at double the speed. Your video makes it look as if this is not a problem as your vehicle appears to turn just fine. Thanks!
@MrYboss
11 жыл бұрын
It`s powered by a golf turbodiesel
@WheelsRCool
9 жыл бұрын
It's a cute-looking vehicle. Very cool though :) Are the tracks homemade? Also just a suggestion, but I would add more suspension travel, that would make it more agile off-road.
@haydenfrench7878
10 жыл бұрын
R the breaks on all diffs and axles or only on 1 diff or axle because where fixing a vehicle just like this and was wondering if having the breaks on just one diff would still work thanks
@solrus20
3 жыл бұрын
Could you please list what drive u use, may be list of main units?
@davidgillam6902
8 жыл бұрын
Hello. I was wondering how you mounted the sprocket on the axle without the tracks interferring with the brake disk or drum?
@battleaxefabandmachine
4 жыл бұрын
Where did you get the left hand nuts for the tractor top link adjuster?
@Ticdaniel
9 жыл бұрын
hur drivs bakaxeln? asså den låter som den varvar ganska skapligt, dubbla lådor eller?
@robbidoux8519
6 жыл бұрын
hello nice project as you other photos or plans of construction, I would like to see how is intal the engine and transmission thank you !
@gervaisfillion9417
10 жыл бұрын
how did you install the engine? it sound like a skidoo engine ,am i right? great toy,i wonder how it goes in deep snow,
@kevinhornbuckle
9 жыл бұрын
Tubodiesel could drive hydraulic motors. Or a single hydraulic motor on the drive shaft, and then brakes to steer. I really like the cabover look to this rig.
@alwaystinkering7710
9 жыл бұрын
Kevin Hornbuckle A single hydraulic motor to the diff might be very slow. They don't spin fast and the diff will lower it further by about 3 to 1. You could rip out trees with it but it would only go 5 mph. I agree I like the look and great for snow because it can be heated.
@АлександрПахтусов-о3х
7 жыл бұрын
Понять не могу от чего катки ,, колеса ,, используют . Кто подсказать может .
@NathanNostaw
10 жыл бұрын
Fantastic machine, so stable with that low center of gravity. Well done
@DEM0NW0RX
7 жыл бұрын
ser kul ut dedär, snyggt byggt👍
@mavericmorph5358
11 жыл бұрын
It seems to defy the laws of physics! It should have fallen flat on its face at 1:42 But it didn't!
@soulxtr
5 жыл бұрын
Лучший самодельный гусеничный вездеход из тех что я видел.
@joet-sk4sw
7 жыл бұрын
u made the whole thing?I was thinking about doing one,not sure were to start,nice job man,wish I could afford to buy one like that.
@MrYboss
7 жыл бұрын
Joseph Tremblay I didn't build it but a friend did. The machine has been uppgraded during 3-4 years. Good luck with your project 👍🏻
@jaymacklin8303
6 жыл бұрын
You need about 1000 pound counter weight in the back
@Tykoo89
11 жыл бұрын
The diff is just orginal dana 30, from a volvo. nothing special, people say steering by braking is bad, but as you can see in the movie it works just fine. maby need to do a new movie soon. now the engine will be av much bigger mercedes 250td and higher topspeed :)
@gbzhemn1
10 жыл бұрын
People are dumb, and much worse - dull. Steering by braking is the shit! It's so much more fun, and provides unmatched control in very tight spaces just for instance. Good luck with that new engine! Bonnvischan Racing now officially has a new fan! You guys seem like you are having a lot of fun :-)
@martinda7446
10 жыл бұрын
What is issue with steering by braking?? Seems like a regular diff and tracks were a made in heaven combination??
@roymiller3399
4 жыл бұрын
where can i get some tracks like that?
@natebrookes4205
8 жыл бұрын
where can I get tracks like those I would say
@goesintite
10 жыл бұрын
Excellent! Bravo! Nice work!
@allgood6760
Жыл бұрын
It goes well👍
@johnvickers6280
3 жыл бұрын
Does it have a heater
@moovin12
3 жыл бұрын
Would a limited slip differential work or would it have to be open diff to turn?
@0Renxx0
3 жыл бұрын
open,.....,best with mechanical diff lock (nissan patrol)
@moovin12
3 жыл бұрын
@@0Renxx0 dont think lsd would work at all? I have some time invested in it already
@darkfireBikes
11 жыл бұрын
Make a video describing how you made it please?
@stefantwotimes
4 жыл бұрын
Amazing build man wooow, ...
@That_2002_POS
4 жыл бұрын
Cooooool
@markg7030
10 жыл бұрын
Go where no man has gone before!
@guypatts494
4 жыл бұрын
Nice bad ass
@kemicalgamer4598
10 жыл бұрын
Swedish people everybody
@longbed454
11 жыл бұрын
Very good work looks like it goes great
@natebrookes4205
8 жыл бұрын
where did u get the tracks
@tylerdewley2141
11 жыл бұрын
whats it powered by?
@garys5490
11 жыл бұрын
What kind of diff?
@macDiesiel
11 жыл бұрын
Did Bigfoot come down and tell you "Nice Job"
@saintboudreau1545
8 жыл бұрын
brilliant , fun,
@maximeplante1090
10 жыл бұрын
quel moteur a tu .....
@boonsnapper
11 жыл бұрын
Sweeeet
@Snurker
11 жыл бұрын
Fyhelvete så cool!
@АлексейФадеев-у2д
5 жыл бұрын
👍
@BeyondTheGraveTakai
10 жыл бұрын
snowcat jr. :3
@guypatts494
7 жыл бұрын
Send me prints so I can build it
@robbidoux8519
6 жыл бұрын
did you find the plans ?
@OpenSourceCitizen
10 жыл бұрын
@:04 it looks like there is a tractor tire with the sidewall cutout. Is that what you tried for tracks 1st? No luck? The cutting-brake diff steer seems to work great. I also don't know why people hate on it. Some say it wears out the diff too fast. You can't ZTR. Big deal, its practically free. Its probably trolls in the hydraulic and specialty drivetrain business. Of course you do have to add a manual locker if you want full traction, which are expensive and not super reliable.
@alwaystinkering7710
9 жыл бұрын
OpenSource Citizen I agree, it's simple, less expensive, less to go wrong, and it works well. I wouldn't even consider a locker- not worth it. That would wear out fast and if one side slips, just apply some steering brake.
Пікірлер: 72