wow that's a good saw ..i am quite surprised did not see the piston come out through the exhaust ..2 strokes are not meant to hold them wide open. rapid throttling and release is ok! high idle way too high poor fellar going to get hot scortch cylinder otherwise ya it runs
@wandabuddy
11 жыл бұрын
My manual says Homelite 32:1 or Homelite Premium Exact. Mix oil with gasoline according to the instructions on the package. If Homelite oil is not available use high quality 2 cycle engine oil mixed at 4 oz. per gallon. Most people I have talked to also recommend using premium gas that has no ethanol in it.
@curtmccall9226
9 жыл бұрын
Hey I have old Super 2 also trying to replace chain. I am sure that it is not the original chain so I was wanting to know what chain to use. Mine has 18 inch bar. Chain on it now has 60 drive links. But I dont believe it is correct chain. My research is Oregon s 62 with 3/8 inch pitch and 0.50 chain width. Or Oregon s 64??
@obfuscated3090
6 жыл бұрын
You can still find the manual online. I just found one of these next to a dumpster in the original box with almost no wear. I've done a lot of cutting with my free saw and it's handier for limbing than my Echo Timber Wolf. Here's some parts diagrams but if you need parts it will involve some hunting. www.partstree.com/parts/homelite/saws-chainsaw/ut-10653-homelite-super-2-chainsaw/walbro-carburetor/
@hubbarddistillery1777
9 жыл бұрын
What are the specs dude? I just found two at the junkyard they started right up..
@franciscohuerta9860
7 жыл бұрын
wat oil it needs and gas?
@franciscohuerta9860
6 жыл бұрын
i got the same chainsaw n mine chain keeps loose wat can i due i tide dat size 11 bolt any suggestions?
@ryanlarrabee79
6 жыл бұрын
Adjust the tensioner
@luckywife430
7 жыл бұрын
this chain saw works best with vegetable cooking oil
@SpeedyJoe.
7 жыл бұрын
You got the high speed adjustment way way to high. You will overheat and blow the engine
Пікірлер: 15